Board cleaning

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • sabre504
    Badcaps Veteran
    • May 2010
    • 449
    • United Kingdom
    #1

    Board cleaning

    Hi have a couple of monitor power inverter boards that have suffered from damp attack
    The green coating that protects the copper traces has bubbled and in some places and come off .
    Does anyone know how or if there is a stripping product to clean this and something to recoat after once i have checked the traces to make sure still useable

    Thanks for any help or advice in advance
    Tags: None
    • digge
      Badcaps Veteran
      • Apr 2006
      • 296
      #2
      Re: Board cleaning

      Unless the boards are still in a damp environment it should be fine just to clean of any moist/contamination on the board and just leave it as is. Im not sure there is anything that would remove the coat completely without damaging the board. One way might be to just remove anything thats loose and then recoat it.

        Comment

        • PCBONEZ
          Grumpy Old Fart
          • Aug 2005
          • 10661
          • USA
          #3
          Re: Board cleaning

          Removers
          http://www.mouser.com/ProductDetail/...9uRr9E0A%3d%3d
          http://www.mouser.com/ProductDetail/...bLSmijEQ%3d%3d

          http://www.mouser.com/Tools-Supplies...formal&FS=True
          Mann-Made Global Warming.
          - We should be more concerned about the Intellectual Climate.
          -
          Be who you are and say what you feel, because those who mind don't matter and those who matter don't mind.
          - Dr Seuss
          -
          You can teach a man to fish and feed him for life, but if he can't handle sushi you must also teach him to cook.
          -

            Comment

            • sabre504
              Badcaps Veteran
              • May 2010
              • 449
              • United Kingdom
              #4
              Re: Board cleaning

              Thanks for the help
              Just gonna try brushing the loose off with a suede brush take all major components off clean and check those and see from there

                Comment

                Previous template Next

                Related Topics

                Collapse
                • Tynan Dill
                  Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
                  by Tynan Dill
                  I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

                  Upon bringing it home and plugging it up, it showed a standby light.

                  I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

                  The screen seems to blackout and stay black, but with a flashlight I can see the display.

                  With my Playstation 4 connected via HDMI, and running a game I can hear sound.

                  Assuming...
                  ORIGINAL POWER SUPPLY BOARD
                  7 Photos
                  11-22-2024, 01:46 PM
                • m1ch43lzm
                  HP Pavilion 15-eh Board DAG7HAMB8F0 - CPU throttling to 0.4GHz (PROCHOT_EXT) and black screen
                  by m1ch43lzm
                  Hi, this is my personal laptop, which the original board (lets call it Board A) blew up PU8700 (TPS51486), making a hole on the board, i had left the laptop at my desk one day with the battery fully charged and didn't touch it for a week, but when i tried to turn it on it didn't
                  Thought the battery was dead, so i plugged in the charger then tried to power on, the power LED blinked once, charged LED still orange, unplugged the charger, plugged in again and I noticed the "magic smoke" smell, so i unplugged the charger, removed the back cover and saw the blown IC (the "magic...
                  05-12-2025, 08:37 PM
                • howardc64
                  A1312 (27” iMac 2009-2011) A1407 (Thunderbolt Display) A1316 (Cinema Display) Display Black Screen Repair
                  by howardc64
                  Problem

                  This is an LG edge LED lit LCD Display. The LEDs are on the bottom edge of the display. There are 2 bars (left and right) Each bar has many LEDs and a 6 pin connector. Each pin drive several LEDs thus is the highest current flow / heat junction. The weak lead free solder gradually fails with thermal expansion/contraction cycling and increases resistance. PSU will compensate up to a point, then when the current is too high, PSU just shut down the backlight causing a dark display. I have even seen one which the connector just fell off as solder points became completely detached....
                  08-04-2024, 10:36 PM
                • howardc64
                  TCL 55S425 few horizontal lines, potential failure on both side of panel/buffer board
                  by howardc64
                  All left and right refers to looking from rear of TV (or looking from front with TV upside down)
                  • TV came with vertical bars and no image. Found faulty TVS on left buffer board. Also replaced T-Con (may have damaged the original while hot air removing components, board has slight warp) and have full image but few horizontal lines on the screen. Some of the lines appears to be 2 pixel tall while others are 1 pixel tall.
                  • Disconnecting left and right buffer board potentially reveals problems on both sides with different signals (unless this T-Con require jumper like Samsung FB_TRDY1&3) Fault
                  ...
                  Yesterday, 05:17 PM
                • Hakuu
                  LG OLED77G1PUA - No Video / Audio after a TCON Board change and Software Update
                  by Hakuu
                  Hi There,

                  This TV was auto switching off after few seconds with some vertical lines on the screen, so got a new TCON board and replaced it.

                  After replacing the TCON board it was working fine and i set it up with everything, used for few hours, then had the bright idea to update the software on it. During the update process, TV switched off and now no audio or video. No relay switch sound.

                  More Details

                  TV Model - LG OLED77G1PUA

                  Got the same exact TCON board from TVPartsToday and replaced it. But didnt transfer the EPPROM data (didnt...
                  07-12-2023, 02:37 PM
                • Loading...
                • No more items.
                Working...