Re: Recommend me a MultiMeter
Do you get paid to link other sites here because that is all you seem to do? If I had a vote I would have voted you got banned long ago for spamming worthless links.
-
-
Re: Recommend me a MultiMeter
Such meter has long been enjoyed by many.
When measuring the ESR signal is a sinusoid.
It produces a measurement at a frequency of 100Hz and 1kHz,which is important for audio.
It measures the minimum values off loss tangent,Q-factor inductances and minimal resistance.
These little more resistance there is nothing to measure.
If you do not know why it is better,to be silent.
Comment
-
-
Re: Recommend me a MultiMeter
young's mentioned products are just generics.. multimeters recomended are all china made mostly.id rather go for the pro's advice ...FLUKE...AGILENT.. SIMPSON...ze branded works of art..Comment
-
Re: Recommend me a MultiMeter
bob parker's esr meter is one of our most valued piece here...never failed.. always accurate..makes money faster....AND VERY USER FRIENDLY... long live mr parker's esr..exrtemely, highly recommended for shop techs and hobbyists.Comment
-
Re: Recommend me a MultiMeter
Good idea devid21.
You go sit in a bunker, close the door, and stay there.
.Mann-Made Global Warming.
- We should be more concerned about the Intellectual Climate.
-
Be who you are and say what you feel, because those who mind don't matter and those who matter don't mind.
- Dr Seuss
-
You can teach a man to fish and feed him for life, but if he can't handle sushi you must also teach him to cook.
-
Comment
-
Re: Recommend me a MultiMeter
One is already sitting there,from Bucharest.
Comment
-
Re: Recommend me a MultiMeter
If you are good I'll send you a Chinese finger toy to keep you busy.
.Mann-Made Global Warming.
- We should be more concerned about the Intellectual Climate.
-
Be who you are and say what you feel, because those who mind don't matter and those who matter don't mind.
- Dr Seuss
-
You can teach a man to fish and feed him for life, but if he can't handle sushi you must also teach him to cook.
-
Comment
-
Mann-Made Global Warming.
- We should be more concerned about the Intellectual Climate.
-
Be who you are and say what you feel, because those who mind don't matter and those who matter don't mind.
- Dr Seuss
-
You can teach a man to fish and feed him for life, but if he can't handle sushi you must also teach him to cook.
-
Comment
-
Re: Recommend me a MultiMeter
Yup, still you're still a nitwit.
The fact you bought it from Germany hardly means it is made there.My METERMAN 37XR-made in Germany.
It is a 'white box' part and most likely Chinese or TW manufactured.
It is re-distributed by Amprobe, Wavtek, and Pomona Electronics [probably others too] under their own names.
-
http://www.amprobe.com/cgi-bin/pdc/v...id=1&type=elec
.
http://www.elexp.com/tst_38xr.htm
.
http://parts.digikey.com/1/parts/986...t-kit-pm1.html
.
KYORITSU has factories in Thailand since the 80's and you don't know where it was made.My KYORITSU 1109S-made in Japan.
-
http://www.kew-ltd.co.jp/en/profile/corporatedata.html
.
http://www.urbandictionary.com/define.php?term=nitwit
.Mann-Made Global Warming.
- We should be more concerned about the Intellectual Climate.
-
Be who you are and say what you feel, because those who mind don't matter and those who matter don't mind.
- Dr Seuss
-
You can teach a man to fish and feed him for life, but if he can't handle sushi you must also teach him to cook.
-
Comment
-
Re: Recommend me a MultiMeter
Harbor Freight, baby! Regularly $3.49, but because I had a coupon, for 88 cents I got 3 of them plus 3 paint brushes. Finest quality -- no fuse for the 10A scale, and one of the meter probe tips came out when I pulled it out of an AC outlet (but it's real secure now). OTOH accuracy was really good, always matching my Fluke 73 on ohms and DC volts, within 0.2%, and the viewing angle is wider.
Comment
-
Re: Recommend me a MultiMeter
http://www.amprobe.eu/de_de/showproduct/25/37XR-A/
http://www.amprobe.eu/de_de/content/Kontakt/
Now Europe is sold KYORITSU-made in Japan.
If you want,i´ll send you pictures.
Comment
-
Re: Recommend me a MultiMeter
amprobes are made in taiwan."Every normal man must be tempted at times to spit on his hands, hoist the black flag, and begin slitting throats." - H.L. MenckenComment
-
Re: Recommend me a MultiMeter
Read the last page.
Comment
-
Mann-Made Global Warming.
- We should be more concerned about the Intellectual Climate.
-
Be who you are and say what you feel, because those who mind don't matter and those who matter don't mind.
- Dr Seuss
-
You can teach a man to fish and feed him for life, but if he can't handle sushi you must also teach him to cook.
-
Comment
-
Re: Recommend me a MultiMeter
After slogging through the myriad of advertising links in this post from a certain new member, I find myself asking......where are the moderators with the long overdue eject button?Comment
-
Hi all,
I was looking to upgrade my main multimeter (Asita MD591) with something that has more features. I'll use it mostly for board diagnostic and diy repairs. I've been eyeing out many of those multi-function ones from Aliexpress but can't seem to make my mind up. Here are the features that I'm looking after:
- Autorange
- DC volts up to 30V
- Accurate Resistance
- Diode test (Beep mode)
- Frequency up to 200MHz
- Capacitanze up to 5000uF
- as cheap as possible
Other functions are not needed but those which are needed... -
I am new to electronics and I'm understanding most of what I'm reading but I have a mosfet on my board that I've identified as a P-channel Trench Mosfet. I haven't a clue how to test this and what I should expect to see with the multimeter probes. I am hoping someone with years more experience than myself can help me understand how to use a multimeter to read this. Please look at the drawing I have attached to this and can you try to explain to me what I should be doing with my multimeter in diode mode and what results I should expect from a good mosfet?...
-
My daily carry just stopped working only me. Started last week with the voltage flickering. Found one lead was broken and I ordered new ones. New leads didn't change anything, it displays “-1” on all settings but on continuity will give the tone when touching. Checked battery and found the fuse blown. Replaced fuse but same results. Cleaned the dial and led display and its parts. Board looks nice and clean no burned or broken components. Nothing traumatic happened to this multimeter I put it aside when I found the lead broken and didn't touch it until I got the neAnyone have any ideas what's... -
I started to learn laptop repair a few weeks ago, since then I ve ordered several dead laptops to try to fix them and learn.
I fixed some of them and some I ve made things worse by blowing components.
Every time while taking measurements with my multimeter.
Yesterday I was working on a dell laptop motherboard, I was checking the charge IC for short in diode mode and it killed the chip.
So my question is are there things I should not do with my multimeter?
Or measurements I should do only with the charger and battery unplugged?... -
Hi all,
First off, this forum really helped me out by advising me to cut some ribbon connectors to the LCD panel in order to fix a 70" TV (lots of threads on Sharp TVs with this issue). I didn't believe that it could work, but it did.
Now I've been encouraged to try to diagnose something quite a bit more complicated. That is an old T430 motherboard. I work on a college campus so I have access to pretty decent tools. I found the schematic for the motherboard on the site, and have been following traces and taking DC measurements from things. I also don't mind...
Comment