Re: New Software Achi LY by PSOFT
I use an usb to serial adapter and set the com port correctly. I use windows 8.1.
I don´t use a soldering station I want using the PC 410 as temperatur ramp-controller with my kiln.
-
Re: New Software Achi LY by PSOFT
use you a direct com port or usb to serial adapter ?
have you set the com port on device manager ? (baud , etc)
what type of OS you have installed ?
on which soldering station do you want to use this software?
on many station (after you have resolve the connect issue) need to make some change.Leave a comment:
-
Re: New Software Achi LY by PSOFT
Hello,
the software Psoft don´t communicate with my PC 410 with RS 485 connection over USB. I´ve connected pin 9 and 10.
What´s the mistake?Leave a comment:
-
-
Re: New Software Achi LY by PSOFT
But you have a machine with bottom preheater and bottom heater ?Leave a comment:
-
-
Re: New Software Achi LY by PSOFT
The software works fine with my station (https://www.badcaps.net/forum/showth...t=60563&page=2 #32) , usually I put the bottom thermocouple directly on the heating element surface because I think if this thermocouple is placed on motherboard's bottom surface when the top heater goes on , its power sends off-scale the bottom pid.
Where you place the bottom thermocouple ?
thanksLeave a comment:
-
New Software Achi LY by PSOFT
-
Copying DMI information from an old bios to a new one is difficult for some members, often they have no experience with a hex editor,or some that have tried find it too hard.There is an option to make things easier for those members so that they don`t need to post their own bios backup for the DMI copying.
Experienced bios modding members can help by posting in other threads the DMI offsets,macro script generated by the software and a download link to the software at softpedia mentioned in this guide,or post your macros in the comments here with a link to the bios request thread .... -
Hi everyone, I recently purchased a BGA machine (ACHI IR PRO SR, 2400W IR Bottom and 450w IR Upper) but I don't know how to create the processing profiles. I need to desolder a faulty GPU on a laptop.
As software I was thinking of using this:
https://www.badcaps.net/forum/troubl...hi-ly-by-psoft
Can anyone tell me the most suitable or common heating curves for soldering and desoldering?
Thank you -
I contacted Microsoft and they said they do not have software to where you could backup all your files to one drive. I mean you can copy some of your files to your one drive folder and back stuff up. However, it does not do this automatically.
I have around (10) hard drives I want to backup to the cloud with One Drive. What is the best software to do this with?
AOMEI Backupper
I Drive
Easeus
I do not want a Cloud Plan. I just need the software to take my DATA and Transfer it to the cloud in a nice, readable, viewable fashion. I wish... -
Hi everyone.
There are some topics here (also on a lot of other places) regarding this issue, but I believe none has a definitive answer. At least I didn't see anyone saying it really worked for them.
In my case I have an iMac A1418 (late 2012) that the fan goes full blast (or at least ramps up the speed) after going to sleep or turning the computer off.
It's not a software issue, cause it was formatted and it happens with any MacOS version I test.
At some places people say it would be an issue with the S5 rail. Others say it's the S0 rail. And some others say it's an SMC...01-17-2025, 08:11 AM -
Hi,
I have a JVC LT-55C870(C). All that happens upon applying power is the red led flashes slowly (1Hz).
If I hold the OK on the remote while powering on, the led flashes at 2Hz, but without a USB Device attached, it obviously does nothing, no screen or backlight.
Any thoughts on this being corrupted software?
Owner says the TV experienced a power surge.
If software is a possibility, can someone point me in the right direction to download the correct software. Is there a procedure to force software to load from USB?
...
Leave a comment: