Re: New Software Achi LY by PSOFT
Hello,
I already have the manual and the software. But the software is only available in Chinese. That's my problem. And without software, I can not control my kiln...
Hampy
New Member
Last Activity: 05-15-2018, 01:25 PM
Joined: 03-09-2018
Location: Bönnigheim
-
Re: New Software Achi LY by PSOFT
hello,
I´wont want driving a BGA rework maschine, I only need a temperatur controlling software for the PC 410 in englisch or german, a so called ramp controlling software for my kiln.
ThanksLeave a comment:
-
Re: New Software Achi LY by PSOFT
Hello,
thank you for info. Do you know where i can get the temperature software for the PC 410.
On Altec Website only in chinese.
Thank you for informationsLeave a comment:
-
Re: New Software Achi LY by PSOFT
Hello,
I see that Psoft goes only till 300°C. But I need 850°C for controlling the kiln.
Is this right?Leave a comment:
-
Re: New Software Achi LY by PSOFT
I use an usb to serial adapter and set the com port correctly. I use windows 8.1.
I don´t use a soldering station I want using the PC 410 as temperatur ramp-controller with my kiln.Leave a comment:
-
Re: New Software Achi LY by PSOFT
Hello,
the software Psoft don´t communicate with my PC 410 with RS 485 connection over USB. I´ve connected pin 9 and 10.
What´s the mistake?Leave a comment:
No activity results to display
Leave a comment: