Copying DMI information from an old bios to a new one is difficult for some members, often they have no experience with a hex editor,or some that have tried find it too hard.There is an option to make things easier for those members so that they don`t need to post their own bios backup for the DMI copying.
Experienced bios modding members can help by posting in other threads the DMI offsets,macro script generated by the software and a download link to the software at softpedia mentioned in this guide,or post your macros in the comments here with a link to the bios request thread ....
Posted Photos
15 Photos
IR.JPG
psoft_language.JPG
PSOFT_MOD1.jpg
psoft_mod.JPG
THERM_POS.jpg
IR_PRO_SC_HACK.jpg
Psof top air.JPG
square ir.jpeg
IMG_20220717_024608_resized_20220717_110300299.jpg
IMG_20220717_021832_resized_20220717_110258367.jpg
IMG_20220717_022250_resized_20220717_110257618.jpg
IMG_20220717_022820_resized_20220717_110258022.jpg
IMG_20220717_024305_resized_20220717_110258727.jpg
IMG_20220717_024237_resized_20220717_110259121.jpg
IMG_20220717_024416_1_resized_20220717_110259708.jpg
-
-
Hi everyone, I recently purchased a BGA machine (ACHI IR PRO SR, 2400W IR Bottom and 450w IR Upper) but I don't know how to create the processing profiles. I need to desolder a faulty GPU on a laptop.
As software I was thinking of using this:
https://www.badcaps.net/forum/troubl...hi-ly-by-psoft
Can anyone tell me the most suitable or common heating curves for soldering and desoldering?
Thank you​ -
I contacted Microsoft and they said they do not have software to where you could backup all your files to one drive. I mean you can copy some of your files to your one drive folder and back stuff up. However, it does not do this automatically.
I have around (10) hard drives I want to backup to the cloud with One Drive. What is the best software to do this with?
AOMEI Backupper
I Drive
Easeus
I do not want a Cloud Plan. I just need the software to take my DATA and Transfer it to the cloud in a nice, readable, viewable fashion. I wish... -
Hi everyone.
There are some topics here (also on a lot of other places) regarding this issue, but I believe none has a definitive answer. At least I didn't see anyone saying it really worked for them.
In my case I have an iMac A1418 (late 2012) that the fan goes full blast (or at least ramps up the speed) after going to sleep or turning the computer off.
It's not a software issue, cause it was formatted and it happens with any MacOS version I test.
At some places people say it would be an issue with the S5 rail. Others say it's the S0 rail. And some others say it's an SMC...01-17-2025, 08:11 AM -
Hi,
I have a JVC LT-55C870(C). All that happens upon applying power is the red led flashes slowly (1Hz).
If I hold the OK on the remote while powering on, the led flashes at 2Hz, but without a USB Device attached, it obviously does nothing, no screen or backlight.
Any thoughts on this being corrupted software?
Owner says the TV experienced a power surge.
If software is a possibility, can someone point me in the right direction to download the correct software. Is there a procedure to force software to load from USB?
...