Tektronix 2236 scope

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Donomite
    Member
    • Dec 2014
    • 22
    • United States

    #1

    Tektronix 2236 scope

    So yesterday I brought home a working Tektronix 2236 scope for free! It lived its entire life offshore on a oil & gas platform (salty air). From what I can tell with limited scope experience, it's operational. The switches and controls are in need of cleaning. So I tried to remove it from the case but can't get it out. It seems to be very tight at the front faceplate end. I've pulled, pryied and hit it from the end. Does anyone know of a way to get it to come out. I even thought of removing the faceplate but am scared of that. I have no choice but to get it out because the controls are so corroded. Thanks, Don
  • stj
    Great Sage 齊天大聖
    • Dec 2009
    • 30937
    • Albion

    #2
    Re: Tektronix 2236 scope

    i dont have a tek,
    but most scopes either the case splits into top and bottom U-sections or the whole outer shell slides off the back!

    Comment

    • Donomite
      Member
      • Dec 2014
      • 22
      • United States

      #3
      Re: Tektronix 2236 scope

      Thanks for your reply stj. I finally got it apart. I used my right foot with a shoe on and pushed from the rear while holding both handle cams. It finally broke free.

      Comment

      • budm
        Badcaps Legend
        • Feb 2010
        • 40746
        • USA

        #4
        Re: Tektronix 2236 scope


        http://www.ko4bb.com/manuals/index.p...ktronix_-_2236
        Never stop learning
        Basic LCD TV and Monitor troubleshooting guides.
        http://www.badcaps.net/forum/showthr...956#post305956

        Voltage Regulator (LDO) testing:
        http://www.badcaps.net/forum/showthr...999#post300999

        Inverter testing using old CFL:
        http://www.badcaps.net/forum/showthr...er+testing+cfl

        Tear down pictures : Hit the ">" Show Albums and stories" on the left side
        http://s807.photobucket.com/user/budm/library/

        TV Factory reset codes listing:
        http://www.badcaps.net/forum/showthread.php?t=24809

        Comment

        Related Topics

        Collapse

        • Document Archive
          DELL Precision 3630 Precision 3000 E-2236 Specification for Upgrade or Repair
          by Document Archive
          This specification for the DELL Precision 3630 can be useful for upgrading or repairing a desktop PC that is not working. As a community we are working through our specifications to add valuable data like the Precision 3630 boardview and Precision 3630 schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet, or download for DELL...
          09-12-2024, 02:20 PM
        • Document Archive
          HP Z2 G4 E-2236 Specification for Upgrade or Repair
          by Document Archive
          This specification for the HP Z2 G4 can be useful for upgrading or repairing a desktop PC that is not working. As a community we are working through our specifications to add valuable data like the Z2 G4 boardview and Z2 G4 schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet, or download for HP Z2 G4 is accurate, safe, error...
          09-12-2024, 02:20 PM
        • Crystaleyes
          RiddleMeThis - What smokes but doesn't burn?
          by Crystaleyes
          Hi all,

          hope life is treating you well.

          I have a question, as I am genuinely puzzled.

          There is this old Tektronix 2215 scope which has been laying around for some time, that I knew had some issue, but couldn't remember what...
          Anyways, last night, I thought I'd give it a look, as space is needed, so put it on the bench and plugged it in.
          The CRT had a terrible trace which only filled half the screen and didn't seem to respond much to any of the controls, so I decided to give it 15 minutes to warm up whilst I cleared up the bench...
          07-02-2023, 01:58 PM
        • EasyGoing1
          Reading input and output of bridge rectifier on the same scope?
          by EasyGoing1
          I have a 40 volt AC transformer that I put a bridge rectifier on, and I wanted to see the input signal and the output signal on the same screen on my scope, so I set one channel up with the test lead on one side of the input and the ground lead on the other side of the input, then I used another channel on the scope and clipped the test lead on the positive side of the output then the ground on the negative side of the output.

          When I connected the transformer to power, the wire that was connected between the ground lead on the second channel and the negative side of the bridge rectifier...
          06-26-2022, 12:52 AM
        • sam_sam_sam
          Hantek scope that can hook up to your iPad or computer IDSO1070A feedback wanted about it specifications
          by sam_sam_sam
          I thinking about about buying one later on this year depending on what feedback I get from this forum members that know more than I do about what is importance about what to have in a scope

          https://www.aliexpress.us/item/32568...3333736563%21s...
          04-12-2025, 10:24 PM
        • Loading...
        • No more items.
        Working...