Group Buy: CH341A Programmer

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • Gabriel
    replied
    Re: Group Buy: CH341A Programmer

    I think it's skygz@qq.com not skygz@qq.net.

    Leave a comment:


  • yorickdowne
    replied
    Re: Group Buy: CH341A Programmer

    I'd love to give SkyGZ 5 bucks, he surely deserves it.

    Email to skygz@qq.net bounces back.

    The blog he used to run is gone.

    Skygz.world.taobao.com is still around, and there's a tab where he talks of his software. I can't make heads or tails of it, no idea what I'm supposed to do next.

    I have an older version 1.18, before he started requiring registration, and that seems to work. It'll likely be fine for my use. Still, I wouldn't mind rewarding the author for his work. I just can't figure out how.

    Leave a comment:


  • Per Hansson
    replied
    Re: Group Buy: CH341A Programmer

    Please stop asking for cracked software.
    Just buy it from the guy, five bucks wont kill you.

    Leave a comment:


  • kiraro
    replied
    Re: Group Buy: CH341A Programmer

    hello ,

    Who can give us V1.31 Cracked ,please .

    Thank you for sharing.

    Leave a comment:


  • kiraro
    replied
    Re: Group Buy: CH341A Programmer

    hello ,

    Who can give us V1.31 Cracked ,please .

    Thank you for sharing.

    Leave a comment:


  • shh200438
    replied
    Re: Group Buy: CH341A Programmer

    I had upload CH341A v1.31 trail version, who would crack it?

    http://www.mediafire.com/file/bq8zb1...341A_v1.31.zip

    Leave a comment:


  • hit1
    replied
    Re: Group Buy: CH341A Programmer

    вот немного другой софт Colibri.rar http://**************/forum/90-46716-4

    Leave a comment:


  • hit1
    replied
    Re: Group Buy: CH341A Programmer

    скиньте и мне пожалуйста (CH341A version 1.31)

    Leave a comment:


  • jackbd81
    replied
    Re: Group Buy: CH341A Programmer

    hi you can send me a pm with version 1.31.
    i'cant find on the forum

    Leave a comment:


  • mockingbird
    replied
    Re: Group Buy: CH341A Programmer

    Originally posted by knappster
    I just tried to e-mail skygz@qq.net and it bounced back. Is there some other way to contact the developer of this software?
    Send me a PM please.

    Leave a comment:


  • knappster
    replied
    Re: Group Buy: CH341A Programmer

    Originally posted by mockingbird
    Why not just pay the author the $5 and have access to the latest versions...
    I just tried to e-mail skygz@qq.net and it bounced back. Is there some other way to contact the developer of this software?

    Leave a comment:


  • hienton2
    replied
    Re: Group Buy: CH341A Programmer

    Thanks Zokasoft

    Leave a comment:


  • ZokaSoft
    replied
    Re: Group Buy: CH341A Programmer

    Ch341a v1.30
    Attached Files

    Leave a comment:


  • Behemot
    replied
    Re: Group Buy: CH341A Programmer

    Scroll down, under the Repply to thread form. See Additional Options, than click Manage Attachments, the rest is pretty straightforward.

    Leave a comment:


  • hienton2
    replied
    Re: Group Buy: CH341A Programmer

    Originally posted by stj
    just upload it here.
    click [go advanced]

    I can not find it STJ . Please help

    Leave a comment:


  • stj
    replied
    Re: Group Buy: CH341A Programmer

    just upload it here.
    click [go advanced]

    Leave a comment:


  • cherifmc
    replied
    Re: Group Buy: CH341A Programmer

    give me attachement adress to have 1.31

    Leave a comment:


  • mockingbird
    replied
    Re: Group Buy: CH341A Programmer

    Why not just pay the author the $5 and have access to the latest versions...

    Leave a comment:


  • cherifmc
    replied
    Re: Group Buy: CH341A Programmer

    1.31 cracked version please

    Leave a comment:


  • cjrs
    replied
    Re: Group Buy: CH341A Programmer

    Originally posted by mockingbird
    Is anyone interested in participating in a group buy for this?

    https://item.taobao.com/item.htm?&id=39537489315







    Sure, there are myriads of CH341A devices on the market, but the software originates from a single seller (though I assume he is using the PonyProg source as his base).

    I spoke with the seller, and there are two versions of his software. One version goes up to 1.29, which requires a paid license.

    The next iteration of his software (current version 1.32 I think) uses a security dongle (The purple USB device shown in the last picture).

    In order to purchase these, we would need to use a TaoBao escrow service because there's no other way to pay the seller.

    The group buy is to offset the cost of the escrow.

    Please post here if you're interested.

    Yes, you are full right, I have send an email to skygz@qq.com and he said me that the last version for unlocked usb dongle CH341A is the version 1.31 and the latest version for locked usb dongle CH341A is the version 1.33 and I have seen in the website: yadi.sk cracked versions of CH341A, these cracked CH341A versions are: v1.29/v1.30. As the v1.31 was released 1-6-2016 I believe that we will find a cracked v1.31 in the next future

    Leave a comment:

Related Topics

Collapse

  • what_1282105
    Thinkpad t480s, completely dead after BIOS flash using CH341A programmer
    by what_1282105
    Following this guide (https://www.reddit.com/r/thinkpad/co...g_and_flashing) i re-flashed my t480s BIOS using an external (CH341A) programmer. The flash didnt work, so i reverted back to my BIOS backup successfully. The BIOS in the chip and the BIOS backup file are identical according to windows' file compare. The revert, however, didnt work: the only thing the computer does is flash the power button 3 times when AC power is connected. I've tried unplugging the CMOS battery, holding the reset button and holding down the power button- no signs of life....
    02-14-2025, 07:27 PM
  • hotcrossedbuns999
    M715q Desktop (ThinkCentre) - Type 10M3 - Request bios chip location and useable bios for use with CH341A Programmer.
    by hotcrossedbuns999
    My pc updated bios through Windows Update and I was greeted with BLACK SCREEN WITH CPU FAN MAX SPEED. I don't think there is even a screen signal, because it triggers my monitor for a couple seconds and then the monitor turns off. I tried the other outputs as well.
    1. I tried clearing bios, resetting bios, removed the CMOS battery, removed m.2 ssd, wifi, and ram. Still black screen with CPU fan blasting.
    2. I tried using the Lenovo BIOS CD and BIOS USB, but neither worked. At least I couldn't get anything to work.
    3. I could only locate two chips that look like bios chips. Could someone verify this
    ...
    01-03-2025, 12:32 PM
  • irfan karatela
    Programming XMC 25QH256C with a CH341a programmer
    by irfan karatela
    I'm able to read and write the chip by selecting a winbond IC of the same size, but when verifying it fails at around 25 percent.

    I've modded the ch341a to 3.3v.

    Can I update the database to include the XMC 25QH256C?
    02-17-2025, 01:54 PM
  • BrentH561
    Elitedesk 800 G6 SFF Bios Password Lock XM25QH128A (3.3v) - Am I doing this right?
    by BrentH561
    Hello everyone, I am looking for help to make sure I am on the right track to remove lost BIOS Admin password on an HP EliteDesk G6 800 SFF. I recently purchased this on ebay and the seller is willing to accept a return but I have already installed my new HDs, NVME, and setup proxmox so I would like to keep it.

    Here is the hardware identification specs:
    HP EliteDesk 800 G6 SFF
    Intel(R) Core(TM) i5-10500 CPU @ 3.10GHZ 16384 MB RAM
    Serial No: MXL1223499
    Product No: 26S74UT#ABA

    BIOS/IC chip seems to be the 4 pin XMC XM25QH128A (3.3v). However most
    ...
    08-23-2024, 08:36 AM
  • notallbad
    LG 55LM6200-TA country group/Area option
    by notallbad
    This is a 2012 LG TV so aware full functionality of the smart functions/apps will be limited however currently unable to get the LG Smart Store.

    Youtube, Netflix and LG Smart store icons briefly appear in the apps list but then automatically disappear after doing 'Initialisation of Premium' via the standard menu, I'm guessing this is due to the Country/Area group its set to is wrong for the UK.

    Unable to change the country group, Area option can be changed which alters the country group but none make any difference. So believe its the country group that needs changing....
    10-20-2024, 11:16 AM
  • Loading...
  • No more items.
Working...