Group Buy: CH341A Programmer

[stj]

all is here
https://github.com/YTEC-info/CH341A-...main/Programas

ASprogrammer and NEOprogrammer are probably the better ones for windows

[Riaz Solangi]

latest update plzzz

[frasking]

Re: Group Buy: CH341A Programmer

Hi please help me
i can read from ch341
EN25Q32B
But i can't write new data on it
Please if any one can help me .

[azizaqa]

Re: Group Buy: CH341A Programmer

Can i use this programmer to flash kb9012?
Do i need any more accessory beside this programmer.

Hi with postal 3

[stj]

Re: Group Buy: CH341A Programmer

this programmer is for flashing 24 series and 25 series chips only.

[inkman]

Re: Group Buy: CH341A Programmer

Can i use this programmer to flash kb9012?
Do i need any more accessory beside this programmer.

[diamondkodi]

Re: Group Buy: CH341A Programmer

Thanks for giving this updated database MXL25L6473F

[VIKRAM SURESH]

Re: Group Buy: CH341A Programmer

Ch341 programmer
25l6465e
25l6473e
25l6473f
25l6475e
include

[stj]

Re: Group Buy: CH341A Programmer

i'v not seen an installer exe before - if that's malware we will hunt you down.
just saying...

[ZokaSoft]

Re: Group Buy: CH341A Programmer

New software buy CH431
Ch341Programmer_v1.1.1.25

[megaraider]

Re: Group Buy: CH341A Programmer

i2c eeprom.
nothing special.
https://www.microchip.com/wwwproducts/en024636

Yes (sorry).
Thought there's a severe incompatibility between MIC and AT starting at 1MBit (128K x 8) devices due to how they handle the 16-bit address limitation in i2c eeprom.
Notice the Block-B0 / Page-P0 bit different location (along with {A0, A1} and {0, A1} in MIC and AT respectively)
[It's odd microchip list them as compatible in the cross reference guide, imho]

[Behemot]

Re: Group Buy: CH341A Programmer

So is there some easy way how to get this thing from fleebay or Ali at this moment? Not in a situation for some shopping adventure right now

[mockingbird]

Re: Group Buy: CH341A Programmer

Do you guys have any idea how to edit this .dat file with database? I need to write something on MIC24LC1025, but unfortunately it's not supported. Maybe there are some settings I can use to program something like this: 128kx8bit; 2,5÷5,5V; 400kHz; SO8 ? Does this frequency matter for reading/writting on memories? Any help would be greatly appreciated

It is listed and supported in version 1.34.

[stj]

Re: Group Buy: CH341A Programmer

i2c eeprom.
nothing special.
https://www.microchip.com/wwwproducts/en024636

[megaraider]

Re: Group Buy: CH341A Programmer

I need to write something on MIC24LC1025

MIC24LC1025

[scob]

Re: Group Buy: CH341A Programmer

Do you guys have any idea how to edit this .dat file with database? I need to write something on MIC24LC1025, but unfortunately it's not supported. Maybe there are some settings I can use to program something like this: 128kx8bit; 2,5÷5,5V; 400kHz; SO8 ? Does this frequency matter for reading/writting on memories? Any help would be greatly appreciated

[yorickdowne]

Re: Group Buy: CH341A Programmer

That's good to know, @Gabriel.

I'm not sure why my initial email bounced. For people who are wondering how this works:

- Send email to skygz@qq.com, tell him you'd like to buy the software only. This is for the "non-dongle" version of the USB CH341A programmer that you can find on Amazon, eBay, and the like. Current version 1.31.
- He'll come back with a Paypal link. The fee is US-$ 10
- When you pay through Paypal, add a yahoo.com email address. He'll be sending you an exe file that is specific to your name and email address, and outlook, gmail etc don't like exe files.
- Run the exe, send him the name and hardware ID it displays, he'll send you a key

That exe is specific to you, so no sharing it around. It's not a generic installer.

[Gabriel]

Re: Group Buy: CH341A Programmer

I sent a mail to skygz@qq.com yesterday and it did not bounce and it's working just fine.

Also you can buy sw alone.

[yorickdowne]

Re: Group Buy: CH341A Programmer

I found a working blog address, http://blog.163.com/skygz@126/ . Here's the note from that blog regarding software registration:

>>
In my own shop to buy the programmer genuine users, software registration please Want to contact. Do not accept other ways to apply for registration (for example: mail \ microblogging \ QQ, etc.)
I only promise to buy in the shop can be a permanent free upgrade, if the software registration fails, you can re-ask, the number of unlimited (but not too cumbersome request).

Do not accept the purchase of users in other places after-sales service (including the following authorized shop users).
Merchants own customers, should be responsible for their own, do not interfere with each other.
>>

I get it, and I don't. The software comes bundled with his hardware, he doesn't want to provide software for "knock-offs". But on the other hand, he could easily charge for the software what he is charging for the hardware & software bundle, at least to customers in the West who have a hard time buying directly from his shop. That sounds like additional revenue with little overhead to me.

Oh well. He's clear about what he wants. I'd like to register the software, but I'm not going to be able to, because I bought a programmer off Amazon.

[yorickdowne]

Re: Group Buy: CH341A Programmer

@Gabriel, you are of course entirely right. I checked my Sent folder: I attempted to send mail to skygz@qq.com, which bounced. I had made a mistake in writing the post.

If anyone knows how to actually get money to SkyGZ for the software, that'd be lovely.

My understanding is he doesn't sell the software, he sells the programmer through the store and you get the software with it.

Alas, that was entirely unclear to me, and I bought a programmer through Amazon. Same beast, just minus software.

It'll work with his software. I'd love to compensate him for it, in some small way, but doing so is proving to be more challenging than I thought it might be.