any comments about this meter
Collapse
X
-
Re: any comments about this meter
just saw this on ebay whats your opinion guys
http://www.ebay.co.uk/itm/ESR-C-L-me...68481718266767Comment
-
Re: any comments about this meter
I would be more convinced if the picture measured the test capacitor correctly.
I wonder what he means by another PCB?Comment
-
Re: any comments about this meter
thats what i thought i think he means a bare pcb so you can put your own components on it lol. i am going to get more pics from him and post them up.Comment
-
Re: any comments about this meter
The last one is made from a circuit shown in a Hungarian magazine, the whole schematics and possibly the source code for the controller is here:
http://www.hobbielektronika.hu/kapcs...eg_oldal4.html
There is another seller on eBay that I think used the same article to create a variation of that meter, his meter looks a bit better and was actually reviewed here :
http://www.eevblog.com/forum/product...cseen#msg90432
If you want something proved to work, go for an ESR Micro or Blue ESR or Atlas Peak ESR (or something like that). The ESR Micro you can buy directly from the guy who makes it who has an account here, RusMike.Comment
-
Re: any comments about this meter
yes i have emailed rusmike a while ago but got no reply as yet?Comment
-
Re: any comments about this meter
I ordered one for myself last week, he asked me to talk on skype and sorted everything quite fast.
He's busy, it took a day just to get both of us online at the same time, but once we managed everything went fast and without hicks. So be patient, that's all I can say.Comment
-
Re: any comments about this meter
just had a email from the ebay seller in this link
http://www.ebay.co.uk/itm/ESR-C-L-me...68481718266767
this was his reply when i asked him why i did not say uf when testing the cap etc
Hello, 4.7 miliFarad is 4700 micro, and 57 miliOms is 0.057 Oms. I will send test probe with crocodiles, but without bateries. Some pictures: http://dtmf.snimka.bg/photos-from-gs....2486.26677296Comment
-
Re: any comments about this meter
whats your guys opinion on this as still not heard from rusmike yet
http://www.ebay.co.uk/itm/ESR-Meter-...item1e6d8bef36Comment
-
Re: any comments about this meter
EEVblog has discussion entitled "ESR meter teardown - Hungarian cottage industry unit from ebay"
http://www.eevblog.com/forum/product...nit-from-ebay/--- begin sig file ---
If you are new to this forum, we can help a lot more if you please post clear focused pictures (max resolution 2000x2000 and 2MB) of your boards using the manage attachments button so they are hosted here. Information and picture clarity compositions should look like this post.
We respectfully ask that you make some time and effort to read some of the guides available for basic troubleshooting. After you have read through them, then ask clarification questions or report your findings.
Please do not post inline and offsite as they slow down the loading of pages.
--- end sig file ---Comment
Related Topics
Collapse
-
by chth96I read EBOOK of Testing Electronic Component and found that
"In order to test the small blue resin coated ceramic disk capacitor which has 104 50v specification,it is possible to test this small ceramic capacitor by making use of analogue meter.
Set to times 10Kohm that has 12v output from the probe to check disorder of ceramic capacitor.
It is not uncommon that testing result of digital capacitance meter is okay,But It show shorted reading when you check it with analogue meter."
Is it really possible to test small ceramic disc capacitor with analogue...-
Channel: General Capacitor Questions & Issues
-
-
by sam_sam_samI have had with regular AA batteries that leak this meter is expensive new I already replaced the battery battery clips once and the same thing happened again and I am tried of so it is getting modified to accommodate lithium ion batteries that are the same size excluding the positive terminal and removing the battery clips I will have enough room for the BMS protection board
I going to put 3 lithium ion battery in parallel with the BMS protection board and a way to charge the battery externally and heat shrink the battery pack and use a JST connector so I easily remove the battery... -
by jorpecHi
I want to change the scale of an analog meter, to monitor the charge of an li-ion single cell, so the needle at the end would point 4.2 volts and the 0 on the meter would point 2.5 volts or so, i tried to add diodes or a zener in series with the meter but the changes of the ambient temperature also changes the voltage value on the meter
I wonder how i can accomplish this so the meter would be precise at any temperature ?
Thnaks -
by sam_sam_samAbout a month ago we had a transformer jumper wire that burned in two different places between two transformers caused over $200 thousand dollars worth of damage to VFD drives at least 10 of them and a memory card and quite a few power supply as well
Now we have most of the equipment that got damaged back up and running except a feeder that has issues and we are waiting for some parts for
Now we also have another piece of equipment that was blowing fuses on the 110 volt controller switch circuit with the āEā stops and one switching power (24 volt) supply and a transformer... -
Greetings, new guy here but always interested in the crazy universe of modding
We just finished construction of around 25 vacation houses, all inside the same private area.
Each house has 3phase power , and we bought an atlas MK10 meter for each house (25 meters total ! )
The metering on a per-house basis is done privately. Its not done by a utility company. The utility company will only charge us for the total consumption of all 25 houses together.
Id like to do a small modification on the firmware of our MK10 to make it easier identify each house's...05-20-2025, 09:09 AM - Loading...
- No more items.
Comment