Hello,
I am currently trying to repair a Sony Model XBR75X850C.
The set has the dreaded 6 blinking error lights flashing. The set tries to startup with the screen illuminating but shuts down immediately
I have replaced the main board but no change.
So voltages from the G4 board are within range except one anomaly.
I keep getting a 1.9 voltage reading from pin out location CN 6402 pin 4 BL_ERR. I don’t see where I should be getting any voltage reading from this pin?
Anyone have any suggestions/recommendations?
TIA
I am currently trying to repair a Sony Model XBR75X850C.
The set has the dreaded 6 blinking error lights flashing. The set tries to startup with the screen illuminating but shuts down immediately
I have replaced the main board but no change.
So voltages from the G4 board are within range except one anomaly.
I keep getting a 1.9 voltage reading from pin out location CN 6402 pin 4 BL_ERR. I don’t see where I should be getting any voltage reading from this pin?
Anyone have any suggestions/recommendations?
TIA
Comment