LCD screen swap between UE65JS9500 and UE65JS9000

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • marekk
    Member
    • Mar 2013
    • 36
    • UK
    #1

    LCD screen swap between UE65JS9500 and UE65JS9000

    I got UE65JS9500 with cracked screen and I wonder whether it would be possible to use LCD panel from UE65JS9000.
    I know that one connect box works for both models, TCON and control board from the TV looks the same so I'm pretty sure it will work.

    I would be very grateful if anyone with more experience would give more information about it.

    Many thanks
    Marek
    Tags: None
    • Storyteller12
      Badcaps Veteran
      • Jun 2020
      • 624
      • USA
      #2
      Re: LCD screen swap between UE65JS9500 and UE65JS9000

      I’m almost positive it will work as long as the versions of each TV is the same. I’m in the US and I believe the only difference in models is one is curved and the other is flat.

      Just try swapping main boards instead of the panels t test.

        Comment

        • marekk
          Member
          • Mar 2013
          • 36
          • UK
          #3
          Re: LCD screen swap between UE65JS9500 and UE65JS9000

          Both models are curved.
          I know that backlight, power supply and inverter are different.
          It's a bit of gamble as I don't have Ue65JS9000 yet. I'm thinking to buy it.

            Comment

            • nomoresonys
              Badcaps Legend
              • Jan 2013
              • 12086
              • U.S.
              #4
              Re: LCD screen swap between UE65JS9500 and UE65JS9000

              I would try it, not positive but i think it will work.

                Comment

                • Storyteller12
                  Badcaps Veteran
                  • Jun 2020
                  • 624
                  • USA
                  #5
                  Re: LCD screen swap between UE65JS9500 and UE65JS9000

                  I looked up both models. They are similar but the frame interpolation is slightly different. 1 is 2000 PQI (picture quality index) and the other is 2400PQI. It sure that matters. It it’s the only difference I saw

                  Other than that everything is the same except 1 is edge lit and the other full array

                    Comment

                    Previous template Next

                    Related Topics

                    Collapse
                    • Ryan.man
                      Macbook 2017 with touchbar (A1706) won't turn on after removing the screen
                      by Ryan.man
                      Hello everybody! Posting this in hopes somebody has some expertise that leads to a clear path of troubleshooting that saves me a lot of time!

                      My macbook has the flex cable problem, the one that prevents the screen turning on. Ive been dealing with this for the last 3 years. Last year it went dead and I managed to fix it following youtube tutorials. But my fix wasnt the best, the problem returned a month later. This week, it went dead again. I again tried to fix it.

                      This time the original cable broke too close to the screen, it can't be fixed without tearing the screen...
                      02-04-2025, 12:23 PM
                    • smic717394
                      iphone XS turns off when press on screen.
                      by smic717394
                      Hi,

                      I have a iphone XS that came in for a screen replacement, the screen was badly cracked, and inside missing scues, on the back of the screen still the blue protector, the screen was a LCD. So we replaced the screen and all good, installed the screen and we noticed that pressing the screen with a bit of force but not excessive, the phone dies. After plugging the charger it turns back on, but again if you press it it dies. I open the phone again, and I can't see anything major, with the phone open, if I press on the logic board, battery, charging board, or even putting pressure on...
                      07-25-2024, 10:16 AM
                    • Chrissygizmo
                      Samsung UE55JU6800K half screen dark
                      by Chrissygizmo
                      Hello everyone, I’ve just been given a Samsung UE55JU6800K smart tv as it had white spots on the screen due to the led lenses falling off. After refitting them & putting the tv back together I thought it was a nice easy fix for a free bedroom tv , then I tried it before screwing the back into place. I realised that the right side of the screen was darker than the other side, I removed the screen again as I thought the backlights had failed but they are fine.
                      I put the screen back in place & turned it back on . The screen seemed to be ok again but different screens on the same...
                      02-10-2025, 12:33 AM
                    • spice_disc
                      Vizio TV M50-C1 reboot cycle and static on screen
                      by spice_disc
                      I'm currently trying to diagnose and fix my Vizio TV (Model M50-C1). I've tried a number of different basic solutions, but I'm trying to determine if my issue is currently a failing panel, T-Con board, or main board (or something else entirely) and whether or not it is worth my time to fix it. Details of the issue and what I've tried are below as well as why I think it is either a bad panel, T-Con board, or main board.

                      The Issue: The TV will be on and working fine but after the TV is on for ~5-10 minutes the screen will freeze (with sound continuing) until the TV reboots itself. While...
                      1 Photo
                      09-08-2024, 02:37 PM
                    • ipatch
                      ipad pro 9.7" blew a SMD component while replacing the screen 🤦‍♂️
                      by ipatch
                      i have an ipad pro 9.7" (1st gen) A1674 where i replaced the screen, but never attached the screen to the frame/chassis (glued down) due to the ipad being previously dropped so the new screen would never fit in the frame properly. so i need flex/bend the chassis to eventually fix the new screen in properly. so i temporarily just applied blue tape around the edges of the screen to keep it in place. when watching videos with the ipad the screen started flicker, so i though maybe the new quasi cheap amz screen i purchased was going out. so i disconnected then reconnected with power still on,...
                      08-24-2024, 02:36 PM
                    • Loading...
                    • No more items.
                    Working...