Thank you to the guys at HEGE supporting Badcaps [ HEGE ] [ HEGE DEX Chart ]

Announcement

Collapse
No announcement yet.

Samsung_LN-T1954H HDTV Look at my pictures tell me what you think is going on

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Samsung_LN-T1954H HDTV Look at my pictures tell me what you think is going on

    Hi All,

    Found this Samsung TV LN-T1954H in garbage and was suprised there was a picture.
    It has some sort of overlay on the left side from top to bottom, about 2 inches wide aprox.

    Look at my pictures tell me what you think is going on here, please.

    Thanks,
    Attached Files
    Last edited by Bubbsy 2002; 07-29-2013, 04:42 PM.

    #2
    Re: Samsung_LN-T1954H HDTV Look at my pictures tell me what you think is going on

    oh tab-bond issue those are tricky i can tell you what it is but not how to troubleshoot it.
    its the little ribbon cables that connect the circuitry to the glass LCD panel and if that get damaged your going to have a tough time fixing it.
    Things I've fixed: anything from semis to crappy Chinese $2 radios, and now an IoT Dildo....

    "Dude, this is Wyoming, i hopped on and sent 'er. No fucking around." -- Me

    Excuse me while i do something dangerous


    You must have a sad, sad boring life if you hate on people harmlessly enjoying life with an animal costume.

    Sometimes you need to break shit to fix it.... Thats why my lawnmower doesn't have a deadman switch or engine brake anymore

    Follow the white rabbit.

    Comment


      #3
      Re: Samsung_LN-T1954H HDTV Look at my pictures tell me what you think is going on

      Tab bonding problem or the IC for the TFT drive which is on the flexible ribbon cable between the LCD glass panel and the PCB is dead.
      Never stop learning
      Basic LCD TV and Monitor troubleshooting guides.
      http://www.badcaps.net/forum/showthr...956#post305956

      Voltage Regulator (LDO) testing:
      http://www.badcaps.net/forum/showthr...999#post300999

      Inverter testing using old CFL:
      http://www.badcaps.net/forum/showthr...er+testing+cfl

      Tear down pictures : Hit the ">" Show Albums and stories" on the left side
      http://s807.photobucket.com/user/budm/library/

      TV Factory reset codes listing:
      http://www.badcaps.net/forum/showthread.php?t=24809

      Comment


        #4
        Re: Samsung_LN-T1954H HDTV Look at my pictures tell me what you think is going on

        Originally posted by budm View Post
        Tab bonding problem or the IC for the TFT drive which is on the flexible ribbon cable between the LCD glass panel and the PCB is dead.
        Hi,

        It looks like this monitor was butchered, from a previous repair.

        What should I look for in regards to the tab bonding is it possible to repair it, and if so how might I do this?

        Thanks for the reply.

        Comment


          #5
          Re: Samsung_LN-T1954H HDTV Look at my pictures tell me what you think is going on

          Originally posted by goontron View Post
          oh tab-bond issue those are tricky i can tell you what it is but not how to troubleshoot it.
          its the little ribbon cables that connect the circuitry to the glass LCD panel and if that get damaged your going to have a tough time fixing it.
          Hi,

          The actual cable does not look damaged, but I may be wrong.

          Thanks,

          Comment


            #6
            Re: Samsung_LN-T1954H HDTV Look at my pictures tell me what you think is going on

            There is no fix for tab bonds if they go bad. Most of the time the panel has to be replaced. But if you're lucky, if you put pressure on where the tab bond connects to the panel it may fix the problem due to a slightly loose tab bond.

            Comment


              #7
              Re: Samsung_LN-T1954H HDTV Look at my pictures tell me what you think is going on

              ^ exactly but i haven't had much luck with that
              Things I've fixed: anything from semis to crappy Chinese $2 radios, and now an IoT Dildo....

              "Dude, this is Wyoming, i hopped on and sent 'er. No fucking around." -- Me

              Excuse me while i do something dangerous


              You must have a sad, sad boring life if you hate on people harmlessly enjoying life with an animal costume.

              Sometimes you need to break shit to fix it.... Thats why my lawnmower doesn't have a deadman switch or engine brake anymore

              Follow the white rabbit.

              Comment

              Working...
              X