Panasonic TC-32LX85 power relay cycling, now dead.

[waitery]

Hi everyone, I have a Panasonic TC-32LX85 that over the past week had a relay that started cycling really bad upon starting the set. This is not your usual Panasonic led blink error code issue, this was the relay turning over every second for minutes on end. Since yesterday, the set is now totally dead and shows no signs of life. I took the back off to get at the power board and checked the fuse and it still has continuity and very low resistance, so no issues there. Caps all look good and there are also no outward signs of issues (scorch marks, burned components, etc)

I did try and take some measurements on the standby5v line and other lines on the rail, but I have no voltages there. The power board number is TNPA4484 and pictures are below.

Any thoughts on how I can proceed troubleshooting this would be great.

[waitery]

Re: Panasonic TC-32LX85 power relay cycling, now dead.

Here are the pics of the power board, both front and back.

[budm]

Re: Panasonic TC-32LX85 power relay cycling, now dead.

You may want to download the service manual for it first:

[kevinm34232]

Re: Panasonic TC-32LX85 power relay cycling, now dead.

Wrong thread disregard..

[budm]

Re: Panasonic TC-32LX85 power relay cycling, now dead.

I think you should remove that E-mail! he may get lots of junk mails.