Re: Group Buy: CH341A Programmer
hello ,
Who can give us V1.31 Cracked ,please .
Thank you for sharing.
hello ,
Who can give us V1.31 Cracked ,please .
Thank you for sharing.
-
-
Re: Group Buy: CH341A Programmer
hello ,
Who can give us V1.31 Cracked ,please .
Thank you for sharing.Comment
-
Re: Group Buy: CH341A Programmer
Please stop asking for cracked software.
Just buy it from the guy, five bucks wont kill you."The one who says it cannot be done should never interrupt the one who is doing it."Comment
-
Re: Group Buy: CH341A Programmer
I'd love to give SkyGZ 5 bucks, he surely deserves it.
Email to skygz@qq.net bounces back.
The blog he used to run is gone.
Skygz.world.taobao.com is still around, and there's a tab where he talks of his software. I can't make heads or tails of it, no idea what I'm supposed to do next.
I have an older version 1.18, before he started requiring registration, and that seems to work. It'll likely be fine for my use. Still, I wouldn't mind rewarding the author for his work. I just can't figure out how.Comment
-
-
Re: Group Buy: CH341A Programmer
@Gabriel, you are of course entirely right. I checked my Sent folder: I attempted to send mail to skygz@qq.com, which bounced. I had made a mistake in writing the post.
If anyone knows how to actually get money to SkyGZ for the software, that'd be lovely.
My understanding is he doesn't sell the software, he sells the programmer through the store and you get the software with it.
Alas, that was entirely unclear to me, and I bought a programmer through Amazon. Same beast, just minus software.
It'll work with his software. I'd love to compensate him for it, in some small way, but doing so is proving to be more challenging than I thought it might be.Comment
-
Re: Group Buy: CH341A Programmer
I found a working blog address, http://blog.163.com/skygz@126/ . Here's the note from that blog regarding software registration:
>>
In my own shop to buy the programmer genuine users, software registration please Want to contact. Do not accept other ways to apply for registration (for example: mail \ microblogging \ QQ, etc.)
I only promise to buy in the shop can be a permanent free upgrade, if the software registration fails, you can re-ask, the number of unlimited (but not too cumbersome request).
Do not accept the purchase of users in other places after-sales service (including the following authorized shop users).
Merchants own customers, should be responsible for their own, do not interfere with each other.
>>
I get it, and I don't. The software comes bundled with his hardware, he doesn't want to provide software for "knock-offs". But on the other hand, he could easily charge for the software what he is charging for the hardware & software bundle, at least to customers in the West who have a hard time buying directly from his shop. That sounds like additional revenue with little overhead to me.
Oh well. He's clear about what he wants. I'd like to register the software, but I'm not going to be able to, because I bought a programmer off Amazon.Comment
-
Re: Group Buy: CH341A Programmer
I sent a mail to skygz@qq.com yesterday and it did not bounce and it's working just fine.
Also you can buy sw alone.Attached FilesComment
-
-
Re: Group Buy: CH341A Programmer
That's good to know, @Gabriel.
I'm not sure why my initial email bounced. For people who are wondering how this works:
- Send email to skygz@qq.com, tell him you'd like to buy the software only. This is for the "non-dongle" version of the USB CH341A programmer that you can find on Amazon, eBay, and the like. Current version 1.31.
- He'll come back with a Paypal link. The fee is US-$ 10
- When you pay through Paypal, add a yahoo.com email address. He'll be sending you an exe file that is specific to your name and email address, and outlook, gmail etc don't like exe files.
- Run the exe, send him the name and hardware ID it displays, he'll send you a key
That exe is specific to you, so no sharing it around. It's not a generic installer.Comment
-
Re: Group Buy: CH341A Programmer
Do you guys have any idea how to edit this .dat file with database? I need to write something on MIC24LC1025, but unfortunately it's not supported. Maybe there are some settings I can use to program something like this: 128kx8bit; 2,5÷5,5V; 400kHz; SO8 ? Does this frequency matter for reading/writting on memories? Any help would be greatly appreciated
Comment
-
Re: Group Buy: CH341A Programmer
i2c eeprom.
nothing special.
https://www.microchip.com/wwwproducts/en024636Comment
-
Re: Group Buy: CH341A Programmer
It is listed and supported in version 1.34.Do you guys have any idea how to edit this .dat file with database? I need to write something on MIC24LC1025, but unfortunately it's not supported. Maybe there are some settings I can use to program something like this: 128kx8bit; 2,5÷5,5V; 400kHz; SO8 ? Does this frequency matter for reading/writting on memories? Any help would be greatly appreciatedComment
-
Re: Group Buy: CH341A Programmer
So is there some easy way how to get this thing from fleebay or Ali at this moment? Not in a situation for some shopping adventure right now
Less jewellery, more gold into electrotech industry!
Half of the computer problems is caused by bad contacts 
Exclusive caps, meters and more!Hardware Insights - power supply reviews and more!Comment
-
Re: Group Buy: CH341A Programmer
Yes (sorry).
Thought there's a severe incompatibility between MIC and AT starting at 1MBit (128K x 8) devices due to how they handle the 16-bit address limitation in i2c eeprom.
Notice the Block-B0 / Page-P0 bit different location (along with {A0, A1} and {0, A1} in MIC and AT respectively)
[It's odd microchip list them as compatible in the cross reference guide, imho]Attached FilesComment
-
-
Re: Group Buy: CH341A Programmer
New software buy CH431
Ch341Programmer_v1.1.1.25Last edited by ZokaSoft; 01-11-2019, 06:27 AM.Comment
-
Re: Group Buy: CH341A Programmer
i'v not seen an installer exe before - if that's malware we will hunt you down.
just saying...Comment
-
Re: Group Buy: CH341A Programmer
Ch341 programmer
25l6465e
25l6473e
25l6473f
25l6475e
includeAttached FilesComment
-
-
Re: Group Buy: CH341A Programmer
Thanks for giving this updated database MXL25L6473F
Comment
-
Re: Group Buy: CH341A Programmer
Can i use this programmer to flash kb9012?
Do i need any more accessory beside this programmer.Comment
-
Following this guide (https://www.reddit.com/r/thinkpad/co...g_and_flashing) i re-flashed my t480s BIOS using an external (CH341A) programmer. The flash didnt work, so i reverted back to my BIOS backup successfully. The BIOS in the chip and the BIOS backup file are identical according to windows' file compare. The revert, however, didnt work: the only thing the computer does is flash the power button 3 times when AC power is connected. I've tried unplugging the CMOS battery, holding the reset button and holding down the power button- no signs of life.... -
My pc updated bios through Windows Update and I was greeted with BLACK SCREEN WITH CPU FAN MAX SPEED. I don't think there is even a screen signal, because it triggers my monitor for a couple seconds and then the monitor turns off. I tried the other outputs as well.- I tried clearing bios, resetting bios, removed the CMOS battery, removed m.2 ssd, wifi, and ram. Still black screen with CPU fan blasting.
- I tried using the Lenovo BIOS CD and BIOS USB, but neither worked. At least I couldn't get anything to work.
- I could only locate two chips that look like bios chips. Could someone verify this
-
I'm able to read and write the chip by selecting a winbond IC of the same size, but when verifying it fails at around 25 percent.
I've modded the ch341a to 3.3v.
Can I update the database to include the XMC 25QH256C? -
Hello everyone, I am looking for help to make sure I am on the right track to remove lost BIOS Admin password on an HP EliteDesk G6 800 SFF. I recently purchased this on ebay and the seller is willing to accept a return but I have already installed my new HDs, NVME, and setup proxmox so I would like to keep it.
Here is the hardware identification specs:
HP EliteDesk 800 G6 SFF
Intel(R) Core(TM) i5-10500 CPU @ 3.10GHZ 16384 MB RAM
Serial No: MXL1223499
Product No: 26S74UT#ABA
BIOS/IC chip seems to be the 4 pin XMC XM25QH128A (3.3v). However most... -
This is a 2012 LG TV so aware full functionality of the smart functions/apps will be limited however currently unable to get the LG Smart Store.
Youtube, Netflix and LG Smart store icons briefly appear in the apps list but then automatically disappear after doing 'Initialisation of Premium' via the standard menu, I'm guessing this is due to the Country/Area group its set to is wrong for the UK.
Unable to change the country group, Area option can be changed which alters the country group but none make any difference. So believe its the country group that needs changing....
Comment