hei computer repair community

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • OMWANA1966
    New Member
    • Dec 2019
    • 6
    • kenya
    #1

    hei computer repair community

    i have a lenovo desktop pc core i3 model CIH61MI V1.1
    symptoms: it works fine when it wants to
    it can go off after power button and the CPU fan spins and stops at this time
    what i have done is to clean it with dry home cleaner and did a hot air on it and it worked for 3 months and the problem occured again
    then i had to reset it with another processor and it worked for 2 weeks and the problem came back
    then i changed memory and it worked for 1 week and the problem came back
    everything seems ok to me what can i do next this time?
    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • itsthatidiotagain
      CDS‑200B ultrasonic cleaner - (other generic Chinese cleaners are somewhat similar)
      by itsthatidiotagain
      CDS‑200B ultrasonic cleaner - AKA James Ultra 7050 etc.

      There are many versions of cheap Chinese ultrasonic cleaners, and a fair few share this design, with a removable tank with handle. There are also fixed tank versions which look to use the same basic layout and presumably the same PCBs.

      I picked one up "spares or repair" on ebay, and the cleaner was dead, but the fuse wasn't blown.

      A quick diode check revealed D7 was shorted. D7 is a 12V 1/2 Watt Zener. I had one in my stash, so this was about as close to a "five minute repair" as...
      06-23-2025, 03:22 AM
    • AlexVG
      Replacing the WiFi module on a vacuum cleaner iROBOT i7
      by AlexVG
      Hi,
      I have had an iROBOT i7 with a camera error (error 68) version REV M, year 2018.

      I bought a liquid damaged Mainboard with WiFi module, from the same vacuum cleaner, but a different year and a different version (REV G).
      (This board does not respond, only the LEDs light up in a circle.
      The liquid damage is catastrophic and restoration is impractical).
      (I bought this board to get the WiFi module and camera).

      The boards are completely different in the installation of elements, even the connector for the WiFi module is different.

      If...
      10-22-2024, 07:20 AM
    • gobby009
      ambiano eletric window cleaner
      by gobby009
      hi guys bought a ambiano eletric window cleaner from a charity shop had a full charge when i bought it ran fine went to charge it and it wont charge the chargers fine so had a look at the motherboard.in the picture i have continuity from the charging port negative pin to the 2 negative points matked in black on the board.but on the posotive side i only have continuity to the first red point marked in the picture not at the second marked point.any ideas....
      11-06-2024, 10:37 AM
    • rtstorm
      Xiaomi Vacuum Cleaner Charger PSU
      by rtstorm
      Hello my vacuum cleaner dock died, 0V on output. I replace the caps but still no voltage. I found out that this resistor is broken (showing 0 Ohm) do know the value of this? Is this really 0 Ohm resistor?...
      05-24-2024, 10:07 AM
    • edugimeno
      Biomass Boiler not driving cleaner motor relay. ENERTRES BIOMASA BI-650
      by edugimeno
      Hi everyone!
      I have this board that suddenly stopped supplying power to an output that drives an interchanger cleaner motor.
      I checked while the board was in place with all wires attached and there's no AC voltage on the corresponding plug X5
      This X5 is driven by fuse F8 (tested OK) which comes from the second orange relay
      To make sure there are no charcoaled contacts inside the relay, I got a 24VDC power supply and got it ready to manually power up the coil side of these relays.
      I respected the polarity, positive to cathode of protecting diode
      So provided all...
      04-18-2024, 01:15 PM
    • Loading...
    • No more items.
    Working...