Ubuntu & Adobe Flash Issues

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • washu
    Badcaps Veteran
    • Jul 2009
    • 310

    #21
    Re: Ubuntu & Adobe Flash Issues

    Originally posted by mockingbird
    washu:

    If you install the hacked DX 10 for Windows XP, can you get DXVA 2 on XP?
    I've never tried, but I doubt it. It may be possible to make a video player app think DXVA 2 is there on XP, but I doubt the real hardware could be made available for the decoding. If it worked at all I would think it would be slower than using just DXVA 1.

    There are pretty major differences between the 2K/XP video system and the Vista/7 one. It's possible to emulate some of the new features, but you'll never get the full speed out if it that way.

    Comment

    Related Topics

    Collapse

    • ekozeko333
      [Help] Lenovo Yoga Slim 7-14ARE05 (DA0LS3MBAF0) – 25Q80DVN1G Flash Is All FF, USB-C PD Stuck at 5V
      by ekozeko333
      Hi all,
      I’m trying to recover a Lenovo Yoga Slim 7-14ARE05 with board DA0LS3MBAF0 Rev:F. I’ve run into an unusual issue where USB-C PD is stuck at 4.7–5V and the system won’t boot (keyboard lights flash briefly, then nothing).
      🔥 The Problem Started After Suspected ESD/PD Fault
      I experienced a power issue or ESD event through a USB-C charger
      After that, the NX20P5090 power switch was visibly burned and was replaced
      Now the PD controller always negotiates 5V @ 2A, even with known-good chargers
      🧠 What I’ve Done So Far
      Flashed...
      06-21-2025, 02:48 AM
    • corrize
      Nikon D800 camera - flash don’t work and capacitor don’t charge
      by corrize
      Hello, I'm stuck in troubleshooting…
      The flash system works like that : when the (mechanic) flash button is pressed, the flash mecanically pop up, and a circuit buck boost elevate 7v (batt) to 200-300v (?) for charging the big capacitor. And when the photo shoot button is pressed, the capacitor is discharged in the xeon light.

      In the D800, there is a first « power board » close to the battery. 2 wires (batt 7v) goes to another little « flash board ». I measured 7v, so ok.
      When I press the flash button, it's detected by the system, flash icon appear on LDC display....
      10-01-2022, 10:02 AM
    • tsavpyn
      Requests to Intel Flash Programming Tool for Linux Ubuntu x86_64
      by tsavpyn
      Dear all,
      I forgot my BIOS password of my Surface Pro 3, I searched for solutions for a long time and knew that by using FPT to dump my bios to bin file and using decryptor, I can get my BIOS password.
      Now I have a problem that I am unable to dump my BIOS into bin file.

      My Surface Pro 3 currently runs on Ubuntu 22.04, with Secure Boot enabled and Boot From SSD Only.

      I searched for FPT but there is no Linux version and none of them work.
      I hereby request a copy of Intel Flash Programming Tool for Linux x64.
      I would really appreciate it if anyone...
      05-28-2024, 11:18 PM
    • i19
      Asus UX3402 / Q409Z - No sound, no TPM, Boot issues: Bios flash?
      by i19
      Hi
      I got an Asus UX3402 / Q409Z and after a BSOD I lost sound, tpm 2.0, and if it turns off it can take HOURS before I can boot again.

      Reading here and on reddit I figured its a BIOS issue, and that reflashing it may fix the problem.

      I want to use an CH341A (new model with 3.3v) to flash it.

      My problem is that I'm not sure if the SOIC8/SOP8 clips will attach to the chip and hold properly? (haven't opened my laptop yet, I'm basing this assumption on a picture from the same thread I attached).

      Any tips on how to connect to it? Maybe something...
      08-20-2024, 06:50 AM
    • SuperAman
      Corolla FM CD Cassette Player issues
      by SuperAman
      Hi guys got a Corolla factory cd cassette player that was giving a lot of issues. It's from 06 Corolla, my friend the same unit in his corolla and he has the same issues.

      1. Stereo restarts by itself (thought loose connection but does this on bumpy and non bumpy surfaces) ''ST'' letters would blink on off on the radio when this would happen.
      2. Audio cuts in and out randomly for a second or a few minutes at a time.
      3. Shows MTL ERROR (randomly or after turning it on) assuming to do with tape deck which actually plays.
      4. Shows ERROR 3 (randomly or after turning...
      07-18-2022, 01:18 PM
    • Loading...
    • No more items.
    Working...