I have an old NAS, Thecus N2310 with PowerPC 465 CPU @800 MHz
There is a teardown https://www.youtube.com/watch?v=L3z3A9Tk8X4
I have experienced frequent problems with system corruption, resulting in emergency and temporary repair and I thought to check the CR1220 battery, similar to computer motherboards, which was outside the parameters with a voltage of 2.5V.
I have already replaced the battery, but I can't start the NAS to continue with OS6 installation or reinstall procedure.
Although there are methods specific to the manufacturer to rewrite the firmware, I failed to do this and, similarly to computers, I think that there should be a method to force the writing of the firmware or the start of the writing sequence.
Can you give me a solution to revive this NAS?
Thanks
There is a teardown https://www.youtube.com/watch?v=L3z3A9Tk8X4
I have experienced frequent problems with system corruption, resulting in emergency and temporary repair and I thought to check the CR1220 battery, similar to computer motherboards, which was outside the parameters with a voltage of 2.5V.
I have already replaced the battery, but I can't start the NAS to continue with OS6 installation or reinstall procedure.
Although there are methods specific to the manufacturer to rewrite the firmware, I failed to do this and, similarly to computers, I think that there should be a method to force the writing of the firmware or the start of the writing sequence.
Can you give me a solution to revive this NAS?
Thanks
Comment