Resistor size matters

dkg

New Member

Join Date: Jul 2020

Posts: 3

Country: US
#1

Resistor size matters

08-03-2020, 12:04 PM

Another Knowledge Seeker question.

While researching SMD resistors I find various physical sizes.
1206 / 0805 /0603 /0402 /0201

Would someone please confirm that the smallest SMD resistor on my 820-2915-B motherboard (i.e. 7050,7051,7052 / 7020,7021,7022) are the 0402 variety?

If not, which one is it?

Thanks in advance.
Tags: None
diif

Badcaps Legend

Join Date: Feb 2014

Posts: 6978

Country: England
#2

08-05-2020, 06:02 AM

Re: Resistor size matters

Most Apple boards have their smallest size at 0201.
Comment

Previous template Next

A1312 (27” iMac 2009-2011) A1407 (Thunderbolt Display) A1316 (Cinema Display) Display Black Screen Repair

by howardc64

Problem

This is an LG edge LED lit LCD Display. The LEDs are on the bottom edge of the display. There are 2 bars (left and right) Each bar has many LEDs and a 6 pin connector. Each pin drive several LEDs thus is the highest current flow / heat junction. The weak lead free solder gradually fails with thermal expansion/contraction cycling and increases resistance. PSU will compensate up to a point, then when the current is too high, PSU just shut down the backlight causing a dark display. I have even seen one which the connector just fell off as solder points became completely detached....
- Channel: Troubleshooting Computer Displays
08-04-2024, 10:36 PM
Intel 12700k missing resistor and cap value/size

by Hw31

Does anyone know the value/size of the cap and resistor where the thumb is?

Thx...
- Channel: Troubleshooting Desktop Motherboards, Graphics Cards, and PC Peripherals
07-23-2024, 04:00 AM
Dell 2209WA - power supply - Fusible Resistor replacement

by jinu_j

Hi

I am trying to repair an ancient Dell 2209WA Monitor which suddenly shut off with a pop sound. On investigation found that one of the fusible resistors had blown. Further investigation identified multiple components as faulty because of which the fusible resistor blew. Please refer the attached circuit diagram showing the components that were found to be damaged.

1. FR950 - blown fusible resistor - 0.2 Ohm 1W
2. Q950 - shorted Q950 MOSFET - 650V 10A N Channel Mosfet
3. R835 - Blown Resistor - 20KOhm SMD resistor
4. D930 - Shorted Schottkey Diode...
- Channel: Troubleshooting Computer Displays
05-03-2025, 10:51 PM
Need help to replace burned resistor in 350w atx psu

by mikey5791

Hi to all forum members,

Got this faulty 350 watt atx psu dirt cheap from a local online seller as i am keen to use it as a learning tool to repair faulty power supply.
The faulty part is quite obvious from the burn area near the 16pin KA7500 BD pwm. The fuse is still intact with good continuity.

Upon power on ac, there is 5vdc standby power on cathode of diode D14 and about 10vdc on cathode of diode D13.(This should be the aux power to generate the 12v and 5v rail.)
Initially i replace the two burned resistors near my marked red arrow to 200 ohm resistor...
- Channel: Troubleshooting Power Supplies and Power Supply Design
12-26-2024, 04:55 AM
Resistor Size Identification

by lethbrp

Hi Everyone,

Newbie here again.

I have a resistor that has blown on a Sonos Connect Amp (see attached). Could someone explain to me how I determine the wattage of the resistor?

Thank you all again for your patience and help.

Peter...
- Channel: General Electronics Technical Discussion
08-25-2023, 07:54 AM
Loading...
No more items.

Resistor size matters

Resistor size matters

Comment

Related Topics