it randomly locks up during high access situations, its slow to boot,slow to access, and the and the reallocated sector count is through the roof as seen in the pic, so should i clone the disk or is it ok?
Attached Files
-
Things I've fixed: anything from semis to crappy Chinese $2 radios, and now an IoT Dildo....
"Dude, this is Wyoming, i hopped on and sent 'er. No fucking around." -- Me
Excuse me while i do something dangerous
You must have a sad, sad boring life if you hate on people harmlessly enjoying life with an animal costume.
Sometimes you need to break shit to fix it.... Thats why my lawnmower doesn't have a deadman switch or engine brake anymore
Follow the white rabbit. -
Re: is this drive bad?
double check that. make sure it's an actual value, use hdat2 or smartctl
If that is the actual value, you have a failing drive. I don't know how it managed to survive that long, backup data!!!
Once you back up data, then you can try cloning the disk, my guess is and I have done this before with a failing toshiba drive using clonezilla, that it will most likely throw device not ready or failed to read errors and won't be clone-able. -
Re: is this drive bad?
hd tune is good & free it scans your drive for bad sectors
http://www.hdtune.com/Last edited by 1supertech; 06-18-2013, 03:00 AM.Comment
-
Last edited by goontron; 06-18-2013, 08:44 AM.Things I've fixed: anything from semis to crappy Chinese $2 radios, and now an IoT Dildo....
"Dude, this is Wyoming, i hopped on and sent 'er. No fucking around." -- Me
Excuse me while i do something dangerous
You must have a sad, sad boring life if you hate on people harmlessly enjoying life with an animal costume.
Sometimes you need to break shit to fix it.... Thats why my lawnmower doesn't have a deadman switch or engine brake anymore
Follow the white rabbit.Comment
-
Re: is this drive bad?
sounds like it might have a bad board/cacheCap Datasheet Depot: http://www.paullinebarger.net/DS/
^If you have datasheets not listed PM meComment
-
Re: is this drive bad?
it is shot/dying either way.. If there's something important on there i'd use ddrescue to get it, as it'll get everything it can if there are ungettable sectors on the disk.Comment
-
Re: is this drive bad?
all the bad sectors are in the swap partition so all the data is intact. i hopeLast edited by goontron; 06-18-2013, 07:34 PM.Things I've fixed: anything from semis to crappy Chinese $2 radios, and now an IoT Dildo....
"Dude, this is Wyoming, i hopped on and sent 'er. No fucking around." -- Me
Excuse me while i do something dangerous
You must have a sad, sad boring life if you hate on people harmlessly enjoying life with an animal costume.
Sometimes you need to break shit to fix it.... Thats why my lawnmower doesn't have a deadman switch or engine brake anymore
Follow the white rabbit.Comment
-
Re: is this drive bad?
Reallocated + Pending sectors = "Bad" Sectors
0 = OK
1-10 = Keep an eye on it
11-50 = Don't use it for anything important (swap or whatever probably OK)
51+ = Back up IMMEDIATELY and do not use
(In my opinion, anyway)
Not good.
Might not be the drive, not good if it is.
Might not be the drive, not good if it is.
I would turn that drive into a speaker or something.
FTFY.Last edited by cheapie; 06-18-2013, 09:32 PM.Comment
-
Re: is this drive bad?
0-2 = ok for me.
just browsing the web with chrome lockedup the drive.
tryed with THREE os'es all slow to boot
the seven other drives in the machine access 7 times faster than this drive
hmm. dubstep would sound good on that.
didn’t clone. so i grabbed a list of software installed with this commandand copy my whole homedir to the new home-partition then re-installed my os'es. *sigh* now i have to go thru the tedius process of adding repository back. ah well at least it wasn’t RAIDCode:$ dpkg --get-selections > /ihopethisworks/software.list
heck it wasnt 5 minuts after i copied my homdir that i was getting a "drive inaccessible" error.
thanks everybody for your help you saved my but.Last edited by goontron; 06-19-2013, 01:10 AM.Things I've fixed: anything from semis to crappy Chinese $2 radios, and now an IoT Dildo....
"Dude, this is Wyoming, i hopped on and sent 'er. No fucking around." -- Me
Excuse me while i do something dangerous
You must have a sad, sad boring life if you hate on people harmlessly enjoying life with an animal costume.
Sometimes you need to break shit to fix it.... Thats why my lawnmower doesn't have a deadman switch or engine brake anymore
Follow the white rabbit.Comment
-
Today recieved hp model 17-f100nx laptop with no power.(motherboard=DAY11AMB6E0) after that repaired +1.05v section due to faulty buck converter.after that power issue fixed and laptop turns on.But "no bootable 3f0 error displayed".so then
i checked the connectivity of ribbon=good communication with hard and motherboard
changed hard disk and checked=3f0 error persist
sata power=+5v available
Then checked data capacitors=all good
Then checked data lines path connectivity to pch=all good
reflashed... -
Hi everyone,
I'm in need of assistance with a Dell Precision 5820 Tower. The BIOS is locked with "Dell Security Manager," preventing access to the HDD-1 hard drive.
**Background:**
I recently purchased this Dell Precision 5820 Tower from a recycler who salvages equipment from abandoned office spaces. The computer was left behind by its previous owner and was password locked. Given that it can run Windows 11, I saw this as an opportunity to upgrade my setup.
**What I've Tried So Far:**
1. I accessed... -
I thought I'd throw out some of my personal experiences in the last 12 months with Intel iMacs, 2.5" SATA SSD drives and Fusion drive data recoveries.
As a backgrounder, Apple never fitted a 2.5" SSD's to these iMacs. Apple's SSD option was a system of 32GB NVMe blade drive (NGFF connector) and Seagate 1TB 2.5" HDD, married together in software to become a Fusion drive. Non Fusion systems have just the 1TB Seagate HDD.
So, the most common reason an iMac comes across my bench is because it's either ridiculously slow, or it fails to boot at all. The most...12-18-2024, 10:34 PM -
So I've worked on dozens of HP and Dell laptops and have never encountered this before.
Steps taken in my usual process.
Reset security settings in the BIOS
Ensure existing HD comes up into the OS
Shut down the laptop and disconnected the main battery
Removed old M2 drive and replaced with a new 1tb Mushkin Temptest NVME drive. (I'm aware the bus is Sata III but the drive should still work at a slower speed right? Been my experience in other laptops)
Replace battery connector and close up the laptop
Insert my USB drive with my Windows 10 image I've... -
This specification for the HP ProBook x360 440 G1 + LaCie Porsche Design USB 3.0 1TB Mobile Drive Hybrid (2-in-1) can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the 440 G1 + LaCie Porsche Design USB 3.0 1TB Mobile Drive boardview and 440 G1 + LaCie Porsche Design USB 3.0 1TB Mobile Drive schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from...09-06-2024, 08:50 AM
Comment