.
Attached Files
-
-
Re: whats wrong with this picture?
I see lots wrong with it:
1) It's a VP6, so kiss the caps goodbye (unless you've already recapped it)
2) There's cables strung outside the support rails
3) There's a HDD cage just perched on top of the PSU<--- Badcaps.net Founder
Badcaps.net Services:
Motherboard Repair Services
----------------------------------------------
Badcaps.net Forum Members Folding Team
http://folding.stanford.edu/
Team : 49813
Join in!!
Team Stats -
Re: whats wrong with this picture?
its recapped.
its in process so the cables are temporary.
the cage is NOT perched there!thanks to a 300w american beauty soldering iron.Comment
-
Re: whats wrong with this picture?
and another will be attached to the floor up front.this is gonna be another machine that sounds like a pissed off beehive and a bunch of typewriters.
its the new neighborhood server.
built from free/rebuilt parts.Comment
-
Re: whats wrong with this picture?
AOpen PSU - watch that. The AOpen I have from a barebones, circa Pentium MMX era, is of less than ideal quality cap-wise, so I'd check on that.
Nice case, by the way.You know there's something wrong when you open up a PSU and are glad to find Teapos.
Why I don't buy cheap cases!
Comment
-
Re: whats wrong with this picture?
its oem'd by fortron.
and i already evicted the fuhjjyusComment
-
Re: whats wrong with this picture?
your hdds are upside downComment
-
Re: whats wrong with this picture?
Its father is a hamster and its mother smells of elderberries?PeteS in CA
Power Supplies should be boring: No loud noises, no bright flashes, and no bad smells.
****************************
To kill personal responsibility, initiative or success, punish it by taxing it. To encourage irresponsibility, improvidence, dependence and failure, reward it by subsidizing it.
****************************Comment
-
Re: whats wrong with this picture?
With all those drives screaming for power, that PSU will burn up and likely take some of the components with it...
Add a second PSU for the drives and rig it to power on with the primary. OR... move the drives to a RAID Array unit and go SCSI and have a
There is no fear, there is power.
There is no death, there is immortality.
There is no weakness, there is the Dark Side.
I am the Heart of Darkness.
I know no fear, But rather I instill it in my enemies.
I am the destroyer of worlds.
I know the power of the Dark Side.
I am the fire of hate.
All the Universe bows before me.
I pledge myself to the Darkness.
For I have found true life, In the death of the light.Comment
-
Re: whats wrong with this picture?
the psu is a 350w fortron rebadged as aopen.
what i have installed in there is running just fine.
has a 4 tb array sitting next to it to hold all the dvd rips,mp3's,warez,and porn me and 8 neighbors can throw at it!Comment
-
Re: whats wrong with this picture?
4Tb scsi? Damn that;s like 26 Hdd's Damn Unless you have 300GB and that's like $15K in drives DamnComment
-
Hi guys! I realized you have a lot of knowledge here so i am hoping you could point me in right direction with my odd issue.
The Tv is a Philips 58PUS8545/12, it had no picture but working backlights.
Original T-con:
Opened the Tv and tested to unplug one ribbon cable at a time. With this test i could see that i got fine picture on both halves as long as there was only one ribbon cable connected, with two connected picture were gone.
First replacement T-con:
I thought it might be t-con and ordered new t-con from china(supposedly tested)... -
This was my main TV for the last 6 years. I'm not inclined to throw out a $2600 TV so quickly so I'm trying to investigate the issue.
Problem
TV was disconnected from power for 6 months during construction. When I plugged it yesterday picture was fine, after 30 seconds it dimmed then started developing horizontal lines, picture then starts to ghost vertically until it degrades into vertical streaks. TV always displays a perfect picture when cold. I can unplug TV for 5 minutes and plug it back in and picture is restored for 20 seconds. I can also keep it in standby mode... -
I have a 60 inch Samsung UN60EH6000F flatscreen TV. The screen went black a few months ago Sound is good, backlight is good, no menu. I replaced the TCon board with a used board purchased from Ebay. It worked fine for a 3-4 months, then the screen started ‘fading' back. Once again, sound is good, backlight is good, no menu. However, this time the picture looks fine for about 10-15 minutes, then fades back. If I power cycle the TV, the display reappears, for another 10-15 minutes, then fades black again. Repeatable ever time.
I ordered a supposedly ‘new' Tcon board this time, and... -
Hello all,
This is my first post, but long term lurker on the form learning as much as possible about these TV's. I was given this TV as due to a power outage of constant On/off of power to TV. The TV originally would just click on and off (Typical Reboot Cycle). I opened the back of the TV, and troubleshooted by taking the 96 pin LVDS off one at a time to see if I had a picture on either side. I finally fixed the reboot cycle by finding the error on the left side of the screen off connector CN 1301, and the TV would stay on. Further troubleshooting led me to the driver boards where... -
Hi friends,
a friend of mine gave me this TV to fix, with common SAMSUNG TV issue - damaged panel. Turning on, sound is present, but no picture. So I went directly to standard process, connecting two pads together with a wire ( see in the picture ), and then removing flex cables. With right flex connected, there was half screen working, but still no picture ( disappearing colors and similar weird stuff ) + working sound. With left flex connected, TV is restarting + working sound. I supposed, left side is damaged, so I then blocked all 8 CLK pins ( going from 0R resistors on the second...
Comment