Blown caps on XFX 8600 GT. What to buy?

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Hayorti
    New Member
    • Jun 2010
    • 1
    #1

    Blown caps on XFX 8600 GT. What to buy?

    I didn't want to reopen an old thread, so I decided to make a new one.
    The old thread was here...https://www.badcaps.net/forum/showthread.php?t=8413

    Basically, I have the same problem.
    3 capacitors blew...

    2 x FZ 1500uF 6.3V
    1 x FZ 1000uF 6.3V

    I wanted to replace all the FZ capacitors like it recommended in the previous thread so I checked out the BadCaps store and found the right options, but since I'm in Canada I wanted to know if I could get the replacements from a local store.
    There's a local store called Sayal Electronics that sells more electronics than anyone could need in a lifetime and I found some good comparables (I think).

    I'm definitely not knowledgeable about voltages and whatnot, so I wanted a second opinion.

    The capacitors I wanna replace are as follows:
    3 x FZ 1500uF 6.3V
    1 x FZ 1000uF 6.3V
    3 x FZ 470uF 16V

    Unfortunately I can't get URL's for the searches, but I attached the screenshots of the searches, respectively.

    I was hoping you guys could give me the best options for each so I can look into pricing.
    It would be much appreciated if you could just provide the SKU number (on the left side of the Part/Stock Number), I can take it from there

    Thank you





    Last edited by Hayorti; 06-28-2010, 11:43 PM.
    Tags: None
    • c_hegge
      Badcaps Legend
      • Sep 2009
      • 5219
      • Australia
      #2
      Re: Blown caps on XFX 8600 GT. What to buy?

      For the 1500uF, the 10th one down (UHN1A152MPD).
      For the 1000uF, the 2nd one down might work, but these or these would be a better option (it's OK to replace 6.3v caps with 10v).
      For the 470uF, none of them would work. Use these , these or these (you lower the capacitance when you replace electrolytics with polymer caps).
      I love putting bad caps and flat batteries in fire and watching them explode!!

      No wonder it doesn't work! You installed the jumper wires backwards

      Main PC: Core i7 3770K 3.5GHz, Gigabyte GA-Z77M-D3H-MVP, 8GB Kingston HyperX DDR3 1600, 240GB Intel 335 Series SSD, 750GB WD HDD, Sony Optiarc DVD RW, Palit nVidia GTX660 Ti, CoolerMaster N200 Case, Delta DPS-600MB 600W PSU, Hauppauge TV Tuner, Windows 7 Home Premium

      Office PC: HP ProLiant ML150 G3, 2x Xeon E5335 2GHz, 4GB DDR2 RAM, 120GB Intel 530 SSD, 2x 250GB HDD, 2x 450GB 15K SAS HDD in RAID 1, 1x 2TB HDD, nVidia 8400GS, Delta DPS-650BB 650W PSU, Windows 7 Pro

        Comment

        • PCBONEZ
          Grumpy Old Fart
          • Aug 2005
          • 10661
          • USA
          #3
          Re: Blown caps on XFX 8600 GT. What to buy?

          Originally posted by c_hegge
          (you lower the capacitance when you replace electrolytics with polymer caps).
          That rule of thumb only applies if the cap is a filter cap for a VR or VRM.
          [As like filtering power..]
          In other applications the uF may be important.
          .
          Mann-Made Global Warming.
          - We should be more concerned about the Intellectual Climate.
          -
          Be who you are and say what you feel, because those who mind don't matter and those who matter don't mind.
          - Dr Seuss
          -
          You can teach a man to fish and feed him for life, but if he can't handle sushi you must also teach him to cook.
          -

            Comment

            • PCBONEZ
              Grumpy Old Fart
              • Aug 2005
              • 10661
              • USA
              #4
              Re: Blown caps on XFX 8600 GT. What to buy?

              FZ 1500uF 6.3V
              - 10x12.5mm - ESR= 0.022 / Ripple = 1800

              FZ 1000uF 6.3V
              - 8x12mm - ESR= 0.036 / Ripple = 1150

              FZ 470uF 16V
              - 8x12mm - ESR= 0.036 / Ripple = 1150
              - 10x12.5mm - ESR= 0.022 / Ripple = 1800

              Smaller ESR # = better
              Larger Ripple # = better

              .
              Mann-Made Global Warming.
              - We should be more concerned about the Intellectual Climate.
              -
              Be who you are and say what you feel, because those who mind don't matter and those who matter don't mind.
              - Dr Seuss
              -
              You can teach a man to fish and feed him for life, but if he can't handle sushi you must also teach him to cook.
              -

                Comment

                Previous template Next

                Related Topics

                Collapse
                • odtech
                  Asus UX490U laptop blown (caps?) on power board.
                  by odtech
                  Greetings friends.

                  I was given this nice little laptop and would like to revive it if possible but i'm stuck identifying blown components. I'm very new to the repair game so i'm proceeding very cautiously.

                  I don't know the history of this laptop and the donator didn't elaborate what happened but it seems some moisture got into the USB C charge port and the result was what looks like some blown caps. The tell is some gunk inside the USB C port and corrosion on the outside as well as what looks like corrosion around the blown components.

                  Any guidance...
                  08-06-2023, 10:29 AM
                • zlr8r
                  HP Probook 640 G5 - replaced blown components, getting power led, fan full, 5-flashes on CAPS Lock and NUM lock, black screen
                  by zlr8r
                  Hey guys, bit stumped with this laptop after replacing 2 blown components i.e., MP86493, MP2979A.

                  To begin with, this laptop was dead-dead.

                  Now with replaced (visibly) blown components, i do get some progress; after connecting battery or main cable;
                  • am getting white power led
                  • 5-long-flashes on CAPS Lock and NUM lock
                  • then, fan full speed
                  • CPU heats up some (smaller die PCH, does not)
                  • always constant black screen no matter what's tried
                  • no USB recognition
                  • no HDMI output
                  this is as far as I can get with it and not sure where to inspect next ?

                  I tried...
                  03-27-2024, 03:13 PM
                • eryjus
                  Heathkit IO-4205 Power Supply Caps
                  by eryjus
                  Hello,

                  First, I am a complete noob with high voltage stuff. I'm learning, but I need help by someone looking over my shoulder.

                  I recently came into posession of a Heathkit IO-4205 5MHz Dual Trace Oscilloscope. The documentation is copyright 1978. I'm told it works.

                  I opened it up to check the caps before I applied power, and found the following black caps and wanted to know what they were. They are on the power supply board. I was able to read the name and model and came up with, "Nytronics 162J-1, 0.1uF, 20% tolerance, 2000VDC."
                  ...
                  05-10-2023, 11:21 AM
                • whc14765
                  1070 - Blown SMD caps, short on 12V PCI
                  by whc14765
                  Hey
                  I got a short on 3 pins of the PCI-E gold connector for 12V.
                  I see a few caps near the top right (near main power connector) that look blown, one is showing a short across it to GND.

                  Unforunately I don't have a schematic or board view for it (EVGA GTX 1070 FTW 8GB).



                  Due to the large number of caps there, I think it may just be decoupling.

                  Any ideas on figuring out the cap values? There also isn't any reference numbers for the caps on the silkscreen.
                  11-23-2022, 06:42 PM
                • captain150
                  Help with switching power supply caps
                  by captain150
                  I'm trying to repair two old VCRs, they both have bad caps. One has leaky ones, the other would barely run until I subbed in some caps from another power supply I had laying around (though they are the wrong values). This vcr works for an hour or two, but then the power supply starts whining and the picture gets lines in it. I didn't replace all the secondary caps, so another voltage might still be problematic, or the values I used are too far off.
                  I've been on mouser and digikey but the options are a bit overwhelming. I just need some new ones that will work. They don't need to be top quality,...
                  03-16-2025, 07:34 PM
                • Loading...
                • No more items.
                Working...