New Capacitor brand
I have some capacitors with the text:
SSL +85°C
K
S
10uF 35V
-
are this bad or good?
SSL +85°C
K
S
10uF 35V
-
are this bad or good?
-
-
Re: New Capacitor brand
wrong section to post in... and pics would be helpful.sigpic
(Insert witty quote here) -
Re: New Capacitor brand
And what application? 85C is unsuitable for many of the newer hotter electronics where there is no active cooling (i.e. fan).--- begin sig file ---
If you are new to this forum, we can help a lot more if you please post clear focused pictures (max resolution 2000x2000 and 2MB) of your boards using the manage attachments button so they are hosted here. Information and picture clarity compositions should look like this post.
We respectfully ask that you make some time and effort to read some of the guides available for basic troubleshooting. After you have read through them, then ask clarification questions or report your findings.
Please do not post inline and offsite as they slow down the loading of pages.
--- end sig file ---Comment
-
Re: New Capacitor brand
those came out of a set top box DVB-T receiver. Top vent is a slightly stretched X
i think those might be samsung..
edit: uhm.. my webspace is acting up. there should be 3 pictures above this text. ftp server works fine, http doesn't work at all
if you can see the pics, it works again.. but right now it doesn't.. i'll leave the images in here anyways..
Last edited by Scenic; 06-27-2010, 07:34 AM.
Comment
-
Re: New Capacitor brand
SSL? Looks like Samsung. Especially if its green.
And yes, its crap. Now sold under the name of Samwha, which is well known to anyone repairing TVs...Comment
-
Re: New Capacitor brand
I have capacitors at the same style, but the color is brown,
105°C ST
L D
SComment
-
Re: New Capacitor brand
i know why my webspace isn't working now. hoster disabled it. said i didn't log in in the last 100 days.. total BS..
oh well.. re-uploaded to a long forgotten free-hoster account.. (where i didn't log in for at least 2 years.. still everything there lol
)
Comment
-
Re: New Capacitor brand
should be low ESR capacitors in a radio be?
sorry,but my english is not good, im from belgium.
Comment
-
Hi people, I hope this is the correct spot to post this, I'm new to the forum.
I have an RTX 3080 Founders Edition which has a burnt up capacitor (it was in parallel with another capacitor which appears damaged too), so I am hoping to be able to identify the capacitor values and order replacements.
I hope these photos make it clear which component I am referring to:
(yes, the soldering is a bit botched from removing the blown one, I know)
I have found the board schematic (attached), but there does not seem to be a boardview available. I have never... -
I replaced some capacitor which is located on optical pickup pcb which is shown in the table below(PCB #2).Because it have been out of order.
Now,It works very well,But I just have found that all caps (6svpc100my and other part number as well) ,which is shown in the table below, has ultra-high ripple current spec.
It is not able to obtain any capacitor which can be a substitute for this ultra-high ripple current nichicon capacitor.
So I replaced it with samxon and rubycon's general capacitor(GP,YXA series).
I know that these capacitor will not last as long as nichicon capacitor... -
Want to repair some broken floppy disk drives. I need help to identify the brand of this capacitor to find a suitable replacement.
Did someone know the brand of the capacitor or a suitable replacement in terms of esr / ripple?... -
When I tried to repair LG 29 inch CRT TV, I found that the ESR value of samyoung SMS capacitor(160v 2.2uf), which is very close to D1879 transistor, is 6 ohm.
Judging from above ESR Meter Table,I think It is necessary to replace this sms capacitor.So I visited local electronics shop,and I purchased 160v 2.2uf rubycon YK capacitor.
But when I browse through rubycon YK datasheet,I found that there is no ripple current rating for 160v 2.2uf specification. But On the contrary, I found 39 mA ripple current rating for 160v 2.2uf SMS capacitor.
Rubycon YK DataSheet (b... -
a few days ago I finally purchased mser-100 v2 and I tested its abillity of measuring ESR value.
I found that It shows pretty accurate ESR value for electrolytic capacitor,But When I measure polymer capacitor of dreamcast game console,I found that one third of polymer capacitor's ESR value is more than twice the value of ESR meter table.(for example, I measured one polymer capacitor of 6.3v 100uf, It showed ESR value of 7.68)
Although my dreamcast now turns 20 years old but it still works. I occasionally have played game with it.
Is this ESR value of polymer capacitor correct?...
Comment