CapXon, CapXon, CapXon!

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • jiroy
    Badcaps Legend
    • Jun 2016
    • 2416
    • Lebanon

    #21
    Re: CapXon, CapXon, CapXon!

    In less than a month , it's Another LG Flatron 1943s with the same faulty error , the one 1000mf 10v , but this time , instead of Su'scon , it is a jamicon . the good side , It has become an easy repair from now on

    Comment

    Related Topics

    Collapse

    • Dannyx
      How I "fixed" the display on an Akai LT-3220AD TV
      by Dannyx
      Good day folks. I thought I'd share with you something I did today, just for a laugh and for a bit of a discussion, since I'm still not entirely convinced what happened there.

      I found an Akai LT-3220AD TV in the dumpster - literally - so me and my colleague brought it back into the shop and dusted it off a bit to see if someone maybe gave up too soon.

      Long story short: backlight came on but had no picture. My colleague attempted to reprogram the SPI chip but it didn't change anything, so we concluded it must be the panel that's faulty, especially after reading about it...
      01-29-2024, 10:12 AM
    • momaka
      KingWin ABT-650MM 650 Watt ATX PSU [PCB: SW8835REV:A]
      by momaka
      For today's thread, I have a KingWin ABT-650MM ATX PSU. Official web page with the PSU specs is still up and can be found here:
      http://www.rmac.kingwin.com/products.../abt_650MM.asp

      I just can't help it when I see a broken / for parts PSU on eBay that's listed for cheap and looks at least somewhat interesting. Well, OK, I won't lie – on the outside, this PSU looks anything but interesting. It's a plain gray box with colorful “spaghetti cables”.




      What mostly drew me into buying it is its 2x PCI-E power connectors...
      03-29-2022, 11:34 PM
    • Genaugmen
      Akai MPK 261
      by Genaugmen
      I got this akai MPK 261. Had no power from USB. Optional Power adapter caused some light smoking, so unplugged and disassemble to get to the main board. There are two surface mount inductors near the power input. One look obviously damaged, removed both for replacement. Then there's this IC a few components away (pictured) that I can't identify. I've done plenty of plenty of surface mount component work, so replacing it isn't a problem. Any insight into what this could be would be greatly appreciated....
      09-17-2023, 01:17 PM
    • sumilumi
      700mv ripple on Akai Sampler linear supply
      by sumilumi
      Hi fellow troubleshooters. This is my first post on badcaps. I've recently setup an electronics workbench. i'm also building a studio with old equipment bought faulty at low cost.
      I've been into electronics since the mid 80's and particularly in the last few years though only getting hands on with repairs now. My knowledge gaps are significant so I'll be posting here to seek guidance advice and general practical applied learning.

      On my bench today is an old ca. 1993-95 Akai hardware sampler. This runs on both a linear and Smps supply. Both are getting on in age and ripple...
      01-02-2022, 10:12 AM
    • withalligators
      Looking for best replacements for Capxons, but can't find data sheets
      by withalligators
      Recapping the power supply board for a Samsung 305T monitor, everything is Capxon except 2 Rubycons. I can't find data sheets matching these online, so don't know what ripple numbers, impedence, etc, to look for. There are a few different looking GL series data sheet PDFs, but the listing that matches the capacitance and voltage is a much bigger case size. I've narrowed down selections with lead spacing and case diameter, and what's in stock at Digi-key

      1 x Capxon 1000uf35v GL C720(is this a part number or batch number, can't find it anywhere) 105c

      1 x Capxon 1000uf35v...
      03-25-2022, 02:30 PM
    • Loading...
    • No more items.
    Working...