iq recap?

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • ratdude747
    Black Sheep
    • Nov 2008
    • 17136
    • USA
    #1

    iq recap?

    i have here a compaq presario 7000 board. 6 rubycon yxg, 7 iq. none of the iq visibly failed.

    board posts slower than an identical board (oddly, with nova in place of iq)

    iq:


    [IMG]PICT004.jpg



    to recap or not recap?
    Attached Files
    sigpic

    (Insert witty quote here)
    Tags: None
    • pfrcom
      Oldbie
      • Jun 2006
      • 1230
      • Australia
      #2
      Re: iq recap?

      Is it because the faster one is set to Quick Start = Enabled (or equivalent) and the slower one isn't ?
      better to keep quiet and be thought a fool, than to open your mouth and remove all doubt

        Comment

        • gdement
          Badcaps Veteran
          • Jan 2007
          • 690
          #3
          Re: iq recap?

          If this board will be used for anything where you care about reliability, then I'd replace the IQ regardless of current condition.

          But as for your symptoms, I've heard of high ESR causing a slow boot. People have talked about that happening when they used general purpose caps from Radio Shack. Never seen it myself though. Definitely check your BIOS settings like pfrcom said.

            Comment

            • ratdude747
              Black Sheep
              • Nov 2008
              • 17136
              • USA
              #4
              Re: iq recap?

              both set to quick boot

              should i recap the other one as well?
              sigpic

              (Insert witty quote here)

                Comment

                • gdement
                  Badcaps Veteran
                  • Jan 2007
                  • 690
                  #5
                  Re: iq recap?

                  I would, unless you're not worried about what happens if they fail later.

                    Comment

                    Previous template Next

                    Related Topics

                    Collapse
                    • Tynan Dill
                      Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
                      by Tynan Dill
                      I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

                      Upon bringing it home and plugging it up, it showed a standby light.

                      I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

                      The screen seems to blackout and stay black, but with a flashlight I can see the display.

                      With my Playstation 4 connected via HDMI, and running a game I can hear sound.

                      Assuming...
                      ORIGINAL POWER SUPPLY BOARD
                      7 Photos
                      11-22-2024, 01:46 PM
                    • m1ch43lzm
                      HP Pavilion 15-eh Board DAG7HAMB8F0 - CPU throttling to 0.4GHz (PROCHOT_EXT) and black screen
                      by m1ch43lzm
                      Hi, this is my personal laptop, which the original board (lets call it Board A) blew up PU8700 (TPS51486), making a hole on the board, i had left the laptop at my desk one day with the battery fully charged and didn't touch it for a week, but when i tried to turn it on it didn't
                      Thought the battery was dead, so i plugged in the charger then tried to power on, the power LED blinked once, charged LED still orange, unplugged the charger, plugged in again and I noticed the "magic smoke" smell, so i unplugged the charger, removed the back cover and saw the blown IC (the "magic...
                      05-12-2025, 08:37 PM
                    • Hakuu
                      LG OLED77G1PUA - No Video / Audio after a TCON Board change and Software Update
                      by Hakuu
                      Hi There,

                      This TV was auto switching off after few seconds with some vertical lines on the screen, so got a new TCON board and replaced it.

                      After replacing the TCON board it was working fine and i set it up with everything, used for few hours, then had the bright idea to update the software on it. During the update process, TV switched off and now no audio or video. No relay switch sound.

                      More Details

                      TV Model - LG OLED77G1PUA

                      Got the same exact TCON board from TVPartsToday and replaced it. But didnt transfer the EPPROM data (didnt...
                      07-12-2023, 02:37 PM
                    • jb_Bak
                      Sony xbr-65x900c main board issues?
                      by jb_Bak
                      Hey guys great forum glad to have found it. I bought a Sony XBR 65X900C cheaply because it didn't work. No signs of life at all not even a light/led. All I hear is a brief high voltage sound when I throw the power to it.

                      Didn't see any obvious signs of damage so right away started checking voltages. This is what I see:
                      Power Board Connector that goes to Main board
                      CN6401
                      Pin 01 NC
                      Pin 02 NC
                      Pin 03 "BL_ON": 0V
                      Pin 04 "N/C"
                      Pin 05 "STBY 3.3V": 3.5V
                      Pin 06 "GND": N/C
                      Pin 07 "AC_OFF"...
                      09-27-2021, 04:52 PM
                    • canadaboy25
                      Panasonic TC-P54VT25 No image. A or D board?
                      by canadaboy25
                      I have a Panasonic TC-P54VT25 that will power on and prime the display but there is no image at all.

                      The panel is primed as there is a slight glow from the entire panel. This means the problem should be logic related. The service manual also confirms this and recommends replacing the A or the D board.

                      I have tried to get the TV to display the test sequence but I have been unable to and I don't even know if this TV has a test sequence or not. I tried following tom66's instructions in post #3 on this thread https://www.badcaps.net/forum/showthread.php?t=26790. There was...
                      01-17-2021, 01:06 AM
                    • Loading...
                    • No more items.
                    Working...