Can Bad Caps Show Up As A Bad Ram Stick Problem???

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • He's Dead Jim
    Member
    • Jul 2007
    • 16

    #1

    Can Bad Caps Show Up As A Bad Ram Stick Problem???

    I just recapped a netvista motherboard..

    before the recap, I put in 2 sticks of compatible ram, but the screen would freeze...

    i took one stick out and tried them one at a time in each socket and isolated what I thought was the bad stick...

    once i finished the recap, i tried each stick individually again and they both run fine...
    i used memtest86 and prime95 and ran both tests for 24 hours each and came up with no errors....

    ?????
  • KeriJane
    Mac Enthusiast
    • Sep 2008
    • 681
    • USA

    #2
    Re: Can Bad Caps Show Up As A Bad Ram Stick Problem???

    Of course bad caps can cause memory errors.

    Both the Memory and the Chipset as well as the CPU need really clean power to operate well. Bad caps can cause voltage and current fluctuations to any of the above that can easily cause the memory to malfunction or even damage it.
    Even if the Chipset or CPU gets the bumpy electricity it can appear to be a Memory error.

    Of course all that bumpy electricity can cause all sorts of other problems and damage too....

    Have Fun!
    Keri
    The More You Learn The Less You Know!

    Comment

    • PCBONEZ
      Grumpy Old Fart
      • Aug 2005
      • 10661
      • USA

      #3
      Re: Can Bad Caps Show Up As A Bad Ram Stick Problem???

      KeriJane is right.

      With your situation one stick may be more sensitive to crappy power than the other.
      Then you recap.
      Both now have good power so both now work.
      .
      Mann-Made Global Warming.
      - We should be more concerned about the Intellectual Climate.

      -
      Be who you are and say what you feel, because those who mind don't matter and those who matter don't mind.

      - Dr Seuss
      -
      You can teach a man to fish and feed him for life, but if he can't handle sushi you must also teach him to cook.
      -

      Comment

      Related Topics

      Collapse

      • momaka
        HannStar Hanns-G HC194d LCD monitor repair
        by momaka
        Normally, I never post repairs this quick after I do them, because… I am usually very slow. But today, I’m making an exception here. Why? No idea. Perhaps only because the repair details are still “fresh” in my head… which is ironic, given this is a 16 year old monitor that hardly anyone will care about today. It is new to me, though. I picked it up last November from someone on my local Craigslist. It wasn’t very close to where I live, but was close to a family friend that I had to go visit anyways. So after watching the posting on Craigslist for a few weeks and seeing it getting...
        03-15-2023, 10:17 PM
      • Paxman_Swede
        Identifying caps on an old Zoom 9000
        by Paxman_Swede
        Hello!

        I have two projects on my work bench. One is a friends dead JBL Xtreme speaker with a blown voltage regulator and corresponding bulged and shorted cap. That cap has clear markings so I know what replacement I need for it.

        The other project however is a whole different deal. It's a Zoom 9000 guitar effect from the 90th that has developed a devil hound howl when there is no input from the guitar. I'm guessing caps problem. So, since I don't really use this effect anymore I thought it would be a perfect project to learn on.

        I have studied the board and...
        01-14-2025, 09:51 AM
      • fl0w
        GeForce 6800GT recap, need help identifying caps and finding replacements
        by fl0w
        Hi,

        I just noticed that my Asus V9999GT (GeForce 6800 GT) had some swelling capacitors. I managed to identify the brown ones, which are Nippon Chemi-Con KZG series, 6.3V 820µF, which I plan to replace with this.
        But for the yellow ones, I guess these are Fujitsu caps, without being able to identify which series... A picture of the video card is attached to the topic.

        I need to replace:
        • 2x 2.5V 1500µF => I plan to use this
        • 2x 16V 330µF=> I plan to use this
        • 1x 6.3V 680µF=> I plan to use this
        Am I correct with the cap choices?

        Thanks for...
        10-02-2024, 11:28 AM
      • captain150
        Help with switching power supply caps
        by captain150
        I'm trying to repair two old VCRs, they both have bad caps. One has leaky ones, the other would barely run until I subbed in some caps from another power supply I had laying around (though they are the wrong values). This vcr works for an hour or two, but then the power supply starts whining and the picture gets lines in it. I didn't replace all the secondary caps, so another voltage might still be problematic, or the values I used are too far off.
        I've been on mouser and digikey but the options are a bit overwhelming. I just need some new ones that will work. They don't need to be top quality,...
        03-16-2025, 07:34 PM
      • Foetuss
        Gigabyte GA-6OXT :: caps question
        by Foetuss
        Good evening

        I recently aquired a rev 1.1 Gigabyte 60XT, and was suprised of the amount of leaking caps for a motherboard of the P3 era. Especially the way the 330µf caps seems like the housing discolored even.
        Now, there are some 3300µF 6.3V KZG series around the CPU. Would it be OK to replace them with something like EEUFR1A332 ? (Panasonic FR 3300µF 10V). Or was this board designed around very low ESR caps?

        But I was also suprised about the bigger boys, which are 330µF 25V.
        Could it be they used 25V caps because they were cheaper / available at that time?...
        02-11-2025, 12:22 PM
      • Loading...
      • No more items.
      Working...