Stumbled across this...

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Super Nade
    Badcaps Veteran
    • Jun 2006
    • 294
    #1

    Stumbled across this...

    http://pizdaus.com/single.php?id=10465



    Even if it is a fake, it is funny as hell. Plus you can amuse yourself with the endless trolling in the comments section.
    Last edited by Super Nade; 12-14-2007, 08:50 AM.
    Q6700 @ 3.6 GHz
    Zippy GSM-6600P
    Curcial Ballistix PC6400 (4 x 1Gb) Micron D9GMH
    Abit IP35Pro
    ATi HD4870
    Tags: None
    • jonnyGURU
      Badcaps Veteran
      • Feb 2006
      • 244
      • United States
      #2
      Re: Stumbled across this...

      Isn't this already posted here somewhere?
      Rest in peace BFG. You were... a job...

        Comment

        • Big Pope
          Approved Vendor
          • Dec 2005
          • 426
          #3
          Re: Stumbled across this...

          Yes, i have been seen this photo 3 years ago.
          My SAMXON Capacitors Database HERE!!

          X-CON is a new brand for SAMXON's Polymer Capacitors.

            Comment

            • Super Nade
              Badcaps Veteran
              • Jun 2006
              • 294
              #4
              Re: Stumbled across this...

              Well, it was the first time I saw something like this. Jon, you might want to check your Samsons.
              Q6700 @ 3.6 GHz
              Zippy GSM-6600P
              Curcial Ballistix PC6400 (4 x 1Gb) Micron D9GMH
              Abit IP35Pro
              ATi HD4870

                Comment

                • jonnyGURU
                  Badcaps Veteran
                  • Feb 2006
                  • 244
                  • United States
                  #5
                  Re: Stumbled across this...

                  They're expanding like hot air balloons as we speak.
                  Rest in peace BFG. You were... a job...

                    Comment

                    • Krankshaft
                      Badcaps Legend
                      • Jan 2007
                      • 2328
                      • USA
                      #6
                      Re: Stumbled across this...

                      Ok so the original cap has a WV of 50 volts and the Rubycon is only 35 volts?

                      Can someone say arc over?

                      Its funny to see the ignorant comments though .
                      Elements of the past and the future combining to make something not quite as good as either.

                        Comment

                        Previous template Next

                        Related Topics

                        Collapse
                        • throwaway327
                          Asus ROG Ally X -RC72LA - changed hidden bios settings with 'Smokeless-UMAF', won't get past boot logo
                          by throwaway327
                          ASUS ROG Ally X - (Handheld Gaming PC)
                          Model No: RC72LA
                          Serial No: SBNVKD001014459

                          Hi all, I've spent the past week digging through the forums and guides to try correct my foolish mistake of changing hidden settings while tinkering around, and to be honest my heads overloaded so I'm hoping you'll be able to help.

                          I used a tool called 'Smokeless-UMAF' to access usually hidden settings in the bios. I tweaked one or two 'safe' things but made the mistake of tweaking a lot of settings under 'USB/Thunderbolt Configurations' when I didn't know what they did. For...
                          06-18-2025, 05:52 PM
                        • H34TO
                          ITE IT8390 (IT8390E-256) programmer "ITE Download Board 4" user manual + firmware, flashing ITE ECs on the cheap
                          by H34TO
                          Recently I've gotten into EC flashing due to my broken laptop(s) and started frantically searching methods for flashing the IT5571E-128 chip on the cheap(due to me beaing a student and not having a job) and noticed that ITE newer chips can be flashed via ISP (In-System Programming) either via SMBus or the KBC (EPP - Enhanced Parallel Port) interface. While these can be achieved with programmers like SVOD4/3 or the RT809H/F those options are WAYYY out of my budget so I was horrified. But recently I stumbled uppon some programmers on aliexpress that claim they can program a variety of ITE chips...
                          06-17-2025, 07:17 AM
                        • CapLeaker
                          Need Stanley SMCU-5 KHR1780 Excavator Controller schematic
                          by CapLeaker
                          Anyone has a schematic for a Stanley SMCU-5 KHR1780 Excavator Controller to share? Its a 24V system. The one I am working on has all 4 MOVs burnt, a hole in the board where the 5 electrolytic capacitors and that heat sink is and a small smd cap decentegrated. The blown MOVs smells so baaaaaad. My truck stinks and by now half of the house too! Just waiting for wifey to ...
                          1 Photo
                          05-13-2025, 07:04 PM
                        • redbaron1007
                          High Power HP1-J600GD-F12S
                          by redbaron1007
                          I got a High Power HP1-J600GD-F12S on the bench today that was killed by roaches judging by the dead roaches and large brown spots in the housing next to said roaches.

                          I was able to identify all the blown smd resistors on the board aside from the one located at R69. I wasn't able to figure out what any of the marking on the resistor was supposed to be and with how little of the marking was left I wasn't able to really make any guesses about what it could be from the surrounding components. It is connected to pin 1 of Q11 (4N65SFA1K) which looks like it is the gate .In the sample...
                          cause of this whole thing
                          6 Photos
                          09-21-2024, 07:00 PM
                        • RabidNative
                          Acer TC-875-UR12
                          by RabidNative
                          Hey all,

                          I stumbled upon an Acer TC-875 UR12 recently and am going to use it as a basic gaming pc. I have already upped the ram to the board max of 32gb, added a case fan, and added an m.2 ssd for OS. I have a 1050ti laying around that I have tossed in it, but it struggles to handle 1440p in some of the games. The issue I am running into is that this tower has one of the proprietary 12vo power supplies that is rated at 300w. There is no 6 pin for auxiliary PCI-e board power and that is severely limiting my choices on graphics cards. I have a donor 500w atx handy and would like...
                          09-18-2024, 04:38 PM
                        • Loading...
                        • No more items.
                        Working...