OST Caps in Power Supplies

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • bgavin
    Badcaps Legend
    • Jan 2007
    • 1355

    #1

    OST Caps in Power Supplies

    I did some searching and came up inconclusive.
    OST RLP seems to be common along with TEAPO in power supplies.

    OK to leave these alone, or should they all be replaced?
  • willawake
    Super Modulator
    • Nov 2003
    • 8457
    • Greece

    #2
    Re: OST Caps in Power Supplies

    personally i dont like the psu specs after recapping. i think its best to purchase seasonic for instance which is tuned for the good caps rather than recap a new cheaper one. of course after some years of service and caps bulging then ok recap there is nothing to lose.

    anyway in answer to your question, at the moment i dont have a problem with ost rlp, need a few more years to advise. i think they are not like the fuhkyouuuuuuu caps. same with teapo, i have seen lots of years of service.
    capacitor lab yachtmati techmati

    Comment

    • Galvanized
      Badcaps Veteran
      • Mar 2006
      • 468

      #3
      Re: OST Caps in Power Supplies

      A comment.
      The new Antec Earthwatts PSUs are built on the same Seasonic provided platform as the mid-range Cosair VX units.
      The Earthwatts is populated with OST RLP and the VX Corsairs are populated with United ChemiCon (UCC).

      Comment

      • bgavin
        Badcaps Legend
        • Jan 2007
        • 1355

        #4
        Re: OST Caps in Power Supplies

        There certainly is a point of diminishing returns: cap price and time vs. buying a new Seasonic.

        I just resurrected a Gateway 500GR by replacing a slew of bad Nichicon caps. BTW, a big thanks to Topcat for the Rubycon 1500/16v that was required by this board.

        The Gateway came with a Hipro P3057FW power supply. It is full of OST and TEAPOs. I was going to leave it alone, but found sufficient comments here to convince me to replace it. I'd hate to smoke that resurrected board.

        This machine was a throw-away by a good client of mine. They wanted a new machine, and tossed out 200 SATA, P4/530 at 3.0 GHz with 800 FSB, and 512mb PC3200. If it remains stable, I'm going to pop CentOS onto it for my mail server. Thx for that tip, also. CentOS is basically the free version of Red Hate Enterprise. Just what I wanted.

        Comment

        • gonzo0815
          Badcaps Legend
          • Feb 2006
          • 1600

          #5
          Re: OST Caps in Power Supplies

          AFAIR KC8 has repeatedly reported failed Ost caps in some FSP and /or Seasonic PSu`s.
          Personally i think that it is a safe bet to take his reports for granted.
          Generally i have no problem in recapping any PSu with something decent like Rubycon ZL, Panasonic FC / FM or similar good caps.
          Furthermore i have not noticed any issues with recapped PSU in contrast to Willawake.

          In fact, i have done this on several Seasonic ss400FS,some FSP, some older Enermax and some LC-Power units.
          Some of them even as they where brand new (to avoid early returns of systems fixed by myself or fixed upon advice from me).

          I measured ripple current all the time with a analog scope and have not noticed any problems so far.
          Sure, i don`t own a PSu tester nor a real load, but all i can say, it has worked out for me.

          But i think you should stick with the original specs of capacitance, unless you are unable to source quality replacement caps with same spec and size or you own a scope and know when things went fubar.

          There are some reports, that recapping certain units (e.g. FSP Epsilon) wit better caps (and higher capacitance ) could lead to increased ripple.

          In the end, i think it is your decision, if you want to recap an PSu for you or others.
          This includes to bear the risk of failure, which is there in any case, if you try to fix something.
          If the decision is already made, to recap a PSU, i think it should be done once & right including any cap of not top notch brand >470uF on the secondary side and if you are in the mood every lytic.

          As precaution i would add, that recapping of known crap psu´s is always a gamble.
          Those units are may be tuned to work with crappy components or even relay at marginal components and are may be not fixable easily or with no better outcome then before.

          Comment

          • willawake
            Super Modulator
            • Nov 2003
            • 8457
            • Greece

            #6
            Re: OST Caps in Power Supplies

            AFAIR KC8 has repeatedly reported failed Ost caps in some FSP and /or Seasonic PSu`s. Personally i think that it is a safe bet to take his reports for granted.
            oops i start checking then

            This machine was a throw-away by a good client of mine. They wanted a new machine, and tossed out 200 SATA, P4/530 at 3.0 GHz with 800 FSB, and 512mb PC3200.
            i want these clients

            CentOS is basically the free version of Red Hate Enterprise. Just what I wanted.
            this is anti-communist os? i support
            capacitor lab yachtmati techmati

            Comment

            • kc8adu
              Super Moderator
              • Nov 2003
              • 8832
              • U.S.A!

              #7
              Re: OST Caps in Power Supplies

              CentOS is basically the free version of Red Hate Enterprise. Just what I wanted.
              :crackmeup:

              Comment

              • bgavin
                Badcaps Legend
                • Jan 2007
                • 1355

                #8
                Re: OST Caps in Power Supplies

                Are you guys picking on the linux noob?



                Willa is the one who turned me on to CentOS... I am now busy installing it on the resurrected Gateway. I really need a better mail server than my ancient Netware box.

                I've been doing installation development on CentOS inside a VMWare session on my workstation. So far, I've got djbnds scripted to where it compiles and installs correctly. Next is QMail, then SpamAssassin and ClamAV.

                Comment

                • willawake
                  Super Modulator
                  • Nov 2003
                  • 8457
                  • Greece

                  #9
                  Re: OST Caps in Power Supplies

                  it is not possible to become a good CentOS admin....works so good that you forget later how you did it
                  capacitor lab yachtmati techmati

                  Comment

                  • kc8adu
                    Super Moderator
                    • Nov 2003
                    • 8832
                    • U.S.A!

                    #10
                    Re: OST Caps in Power Supplies

                    no crackmeup?
                    i was making fun of red HATE

                    Comment

                    • hkivan
                      Senior Member
                      • Mar 2006
                      • 122

                      #11
                      Re: OST Caps in Power Supplies

                      Originally posted by bgavin
                      I did some searching and came up inconclusive.
                      OST RLP seems to be common along with TEAPO in power supplies.

                      OK to leave these alone, or should they all be replaced?
                      BTW, the asrock K8upgrade-NF3 has many OST RLP 6V3 1000uF all over the
                      slots & NF3 chipset.

                      weeks ago, I replaced them with sanyo WG 6V3 1000 & Panasonic FL 10V 1000.
                      The result is my ram could run at 222Mhz ( i.e. DDR444 ) , CL2.5 , 1T command rate. B4, it could only be 220Mhz, CL3 , 2T with 2 DIMMs installed.
                      ******************************************

                      Comment

                      • gonzo0815
                        Badcaps Legend
                        • Feb 2006
                        • 1600

                        #12
                        Re: OST Caps in Power Supplies

                        That`s was i intend to do with my Asrock Dualsata II. I probably use some 1200uF Pansonic FM near ram and some 1000uF ones for the rest.
                        I just have to pull it from my system......

                        Comment

                        • gonzo0815
                          Badcaps Legend
                          • Feb 2006
                          • 1600

                          #13
                          Re: OST Caps in Power Supplies

                          That`s was i intend to do with my Asrock Dualsata II. I probably use some 1200uF Pansonic FM near ram and some 1000uF ones for the rest.
                          I just have to pull it from my system......
                          I assume that i will get a real benefit in every aspect from this. Most quirks around this board are probably due to bad caps anywhere except the VRM.

                          Comment

                          • bgavin
                            Badcaps Legend
                            • Jan 2007
                            • 1355

                            #14
                            Re: OST Caps in Power Supplies

                            OT: I installed CentOS 5 on the resurrected Gateway 500GR, and it crapped right out of the box. The X server cannot recognize the Intel board, and i915G video chipset.

                            This sucks.

                            I put Windows Server 2003 on the same machine, and it sees the video adapter as Standard VGA Device. Puzzling, especially when 2003 won't install the i915G drivers, saying the standard drivers are a better match. I dunno if I have a board problem, or ?

                            I guess there is always a naggic doubt when jusing a recapped and resurrected board.

                            Comment

                            • Super Nade
                              Badcaps Veteran
                              • Jun 2006
                              • 294

                              #15
                              Re: OST Caps in Power Supplies

                              OST on MB's are shit. OST on PSU's are shit (especially near the power transistors), in fact OST is probably as bad as the Fujjjuckus.
                              Q6700 @ 3.6 GHz
                              Zippy GSM-6600P
                              Curcial Ballistix PC6400 (4 x 1Gb) Micron D9GMH
                              Abit IP35Pro
                              ATi HD4870

                              Comment

                              Related Topics

                              Collapse

                              • Tynan Dill
                                Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
                                by Tynan Dill
                                I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

                                Upon bringing it home and plugging it up, it showed a standby light.

                                I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

                                The screen seems to blackout and stay black, but with a flashlight I can see the display.

                                With my Playstation 4 connected via HDMI, and running a game I can hear sound.

                                Assuming...
                                11-22-2024, 01:46 PM
                              • eryjus
                                Heathkit IO-4205 Power Supply Caps
                                by eryjus
                                Hello,

                                First, I am a complete noob with high voltage stuff. I'm learning, but I need help by someone looking over my shoulder.

                                I recently came into posession of a Heathkit IO-4205 5MHz Dual Trace Oscilloscope. The documentation is copyright 1978. I'm told it works.

                                I opened it up to check the caps before I applied power, and found the following black caps and wanted to know what they were. They are on the power supply board. I was able to read the name and model and came up with, "Nytronics 162J-1, 0.1uF, 20% tolerance, 2000VDC."
                                ...
                                05-10-2023, 11:21 AM
                              • GLISIT
                                Asus Probook P5440UF-XB74 power issue
                                by GLISIT
                                Hi all,

                                TL;DR - this laptop is driving me nuts with the oddball power-related behaviors. Appreciate any insight you can provide!


                                I'm experiencing a power issue on an Asus Probook P5440UF-XB74. Although I've worked with electronics and computers for decades, this is my first attempt at getting into motherboard-level component troubleshooting. Any help the community can provide is greatly appreciated!

                                A few weeks ago I was using the laptop (on battery power) for a Zoom meeting. The battery was running very low (long meeting) but I wasn't worried about...
                                01-16-2025, 02:29 PM
                              • bcstedt
                                LG 42LB5D, 42LB5DF-UL, 2008-01, Power On Issue, Replaced PS Caps
                                by bcstedt
                                LG 42LB5D (42LB5DF-UL) from 2008-01, unit is in good shape and no obvious heat damage or cracked solder on the boards.

                                Problem:
                                On first power-up the power LED flashes green about 18x and then stays solid. No backlight or image is present. Click power button, wait 10s for a click and the LED turns red. Wait 1-2s and hit power again and maybe it'll power up fully after 6 green flashes. If it doesn't light up on the sixth flash then the cycle repeats.

                                It seems that if the mainboard power is left on for a few minutes (solid green power, no backlight, no image)...
                                01-18-2024, 01:03 PM
                              • captain150
                                Help with switching power supply caps
                                by captain150
                                I'm trying to repair two old VCRs, they both have bad caps. One has leaky ones, the other would barely run until I subbed in some caps from another power supply I had laying around (though they are the wrong values). This vcr works for an hour or two, but then the power supply starts whining and the picture gets lines in it. I didn't replace all the secondary caps, so another voltage might still be problematic, or the values I used are too far off.
                                I've been on mouser and digikey but the options are a bit overwhelming. I just need some new ones that will work. They don't need to be top quality,...
                                03-16-2025, 07:34 PM
                              • Loading...
                              • No more items.
                              Working...