Hi Guys,
I'm new to the world of caps and would appreciate a little first time advice.
I'm attempted to fix my LCD monitor. I've been having problems with it powering on, flickering and hissing then turning off 30 seconds later. After some reading around I've concluded its probably the caps on the power supply board. I've pulling it open and had a look at the PSB however they are not showing the obvious signs of being blown.
I was wondering if I could firstly get an expert eye to conclude if they are blown and secondly if indeed they are blown it would be great to some advice on the replacement cap I will need.
Thanks, C.
I'm new to the world of caps and would appreciate a little first time advice.
I'm attempted to fix my LCD monitor. I've been having problems with it powering on, flickering and hissing then turning off 30 seconds later. After some reading around I've concluded its probably the caps on the power supply board. I've pulling it open and had a look at the PSB however they are not showing the obvious signs of being blown.
I was wondering if I could firstly get an expert eye to conclude if they are blown and secondly if indeed they are blown it would be great to some advice on the replacement cap I will need.
Thanks, C.
Comment