Identify Capacitor

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • fleater
    New Member
    • Dec 2011
    • 4
    #1

    Identify Capacitor

    Hi Guys,
    I am trying to identify a capacitor that has broken on a foot pedal of my welding machine.

    I know that this is mainly a website for computers but is a capacitor not a capacitor?
    Regards,
    Fleater
    Tags: None
    • Blargh523
      Member
      • Dec 2012
      • 46
      • USA
      #2
      Re: Identify Capacitor

      What's pictured: Cera-Mite (AKA Vishay) part number 565R5HKP10 (now obsolete).

      0.1uf 500V ceramic -20%/+80%

      Replacement Vishay: S104Z93Z5VL83L0R

      Or with a better tolerance range (which is easier to find)

      Vishay: 5GAP10BJA1
      Kemet: C330C104MCR5TA
      AVX: SK537C104MAR
      Last edited by Blargh523; 01-02-2013, 11:02 AM.

        Comment

        • fleater
          New Member
          • Dec 2011
          • 4
          #3
          Re: Identify Capacitor

          Thank you very much for your fast response!


          Originally posted by Blargh523
          What's pictured: Cera-Mite (AKA Vishay) part number 565R5HKP10 (now obsolete).

          0.1uf 500V ceramic -20%/+80%

          Replacement Vishay: S104Z93Z5VL83L0R

          Or with a better tolerance range (which is easier to find)

          Vishay: 5GAP10BJA1
          Kemet: C330C104MCR5TA
          AVX: SK537C104MAR

            Comment

            Previous template Next

            Related Topics

            Collapse
            • SrMrPixel
              need help to identify a failure on DIY guitar pedal (MXR Micro Amp)
              by SrMrPixel
              I'm building this pedal for the second time and it has the same failure. Voltage divider not working as it should. Before the 10M resistor it works, 4.5v, but after it the voltage drops depending on the value of the resistor I put on. 10M=0.45v 2M=1.9V and so on. It should not do that, that resistor is just for biasing the input signal.

              Any idea?

              ...
              07-24-2025, 12:42 AM
            • CG2
              Janome DC3050 Sewing Machine Pedal Resistance
              by CG2
              OK, this is a long shot. I got this sewing machine cheap because it's end of line, ex-display, and had no pedal. The genuine pedal costs £60, while Ebay knock-offs go for around £15. So I went for the knock-off, it doesn't work, and I'm not sure whether it's the pedal or the sewing machine that has the problem.

              Now this is an electronic machine, unlike the old fashioned sort where the pedal was a big resistor in series with the power to the motor. Here, the pedal is just (I think) a variable resistor fed with a 5 volt supply, and limited to a current of 5 milliamps. Assuming that...
              04-14-2023, 07:53 AM
            • BlackBurn
              Help to identify a laptop mainboard SMD capacitor LA-9982P
              by BlackBurn
              Hello everyone,

              I have an Dell Inspiron 15 3537 laptop mainboard (LA-9982P Rev. 3.0 (A02)) with a blown SMD capacitor as shown in the attached images. However, there is no printed specifications near the capacitor or a codename for the capacitor to identify the specification of the capacitor to replace it. I wonder how to identify the capacitor since the mainboard schematics are also useless as the capacitors are not named on the board. Any help would be highly appreciated.

              Thank You. Stay Safe.
              Chamara...
              11-27-2020, 08:30 AM
            • chth96
              If I replace with inferior capacitor, Is it No harm to other IC components at all?
              by chth96
              I replaced some capacitor which is located on optical pickup pcb which is shown in the table below(PCB #2).Because it have been out of order.
              Now,It works very well,But I just have found that all caps (6svpc100my and other part number as well) ,which is shown in the table below, has ultra-high ripple current spec.
              It is not able to obtain any capacitor which can be a substitute for this ultra-high ripple current nichicon capacitor.
              So I replaced it with samxon and rubycon's general capacitor(GP,YXA series).
              I know that these capacitor will not last as long as nichicon capacitor...
              12-22-2023, 04:34 AM
            • chth96
              How can I test non-polarized capacitor?
              by chth96
              I desoldered samwha NF capacitor(50v 5.6uf) from PCB circuit of 29inch CRT TV which have symptoms of no display after I heard sound of inrush of current to TV whenever I switch on this television.
              I measured ESR value of this non-polarized capacitor(samwha NF capacitor 50v 5.6uf) by means of MESR-100 ESR meter and It displayed 0.3 ohm

              And When I measured its capacitance with digital multimeter and LCR-T4 Mega328 meter, It displayed 10uf from DMM and 8uf from LCR-T4 meter.
              I found catalogue of samwha capacitor(samwha-catalogue_3.pdf file), which is attached to this thread,...
              06-02-2024, 07:31 PM
            • Loading...
            • No more items.
            Working...