What would be a good substitute for a Rubycon YK series 2200uF 25V 85C capacitor? Length not more then 27mm, preferably available at DigiKey at the moment?
Thanks for your suggestions!
Thanks for your suggestions!
-
-
Re: Rubycon YK substitute
Would Nichicon VR work? (ripple current - 1.55A) -
Re: Rubycon YK substitute
Rubycon YK 2200uF 25V (ripple current - 1.57A)
VR should work but they are 85C and a 105C would last longer.
- I would use one of these.
http://search.digikey.com/scripts/Dk...me=565-1966-ND
http://search.digikey.com/scripts/Dk...name=P10284-ND
http://search.digikey.com/scripts/Dk...me=493-1838-ND
.Mann-Made Global Warming.
- We should be more concerned about the Intellectual Climate.
-
Be who you are and say what you feel, because those who mind don't matter and those who matter don't mind.
- Dr Seuss
-
You can teach a man to fish and feed him for life, but if he can't handle sushi you must also teach him to cook.
-
Comment
-
Hello again Community
Anyone verse on how you go about choosing a substitute mainboard for your TV repair. Like the chap in the video below sometimes a 1:1 replacement board is too expensive and reballing a mainchip(s) maybe outside of your skillset
. In the video the poster states one needs to match the replacement board with the SMPS, T-con (if not built in) and panel (and substitute cabling be also be required).
I'm very interested in choosing a suitable replacement board for any model or make of TV and the general (or detailed if your willing) step this entails....03-23-2024, 02:55 AM -
In my search for a proper 5v heavy ATX power supply, I selected an old Antec SU-380 that I've had in storage for a long time. Opening the power supply reveals a couple bulged capacitors. I removed all the caps and made a map for myself. I found the datasheet for the PCE TUR series in this thread:
https://www.badcaps.net/forum/showthread.php?t=14159
It says these are general purpose, so I assume I can replace them with any general purpose capacitors, but I don't really know anything about power supply circuits or reading capacitor datasheets. Despite this, I've been shopping for replacements:... -
Hi to all!
I want to know, if somebody knows, with wich mosfet can i replace 28n03 (i´ve didn't found it like that)
VDS= 30 V, ID = 28 A RDS(on) < 18mΩ @ VGS = 10 V RDS(on) < 30mΩ @ VGS = 4.5V
Thx in advance!... -
Hi All,
Need help sourcing a substitute for ACT remover G-450 in Canada.
Removing glue from Flex Cable on LED TV that I dislodged so I can resolder with ACF tape.
Can someone confirm if acetone will work?
They will not ship to Canada.
Thanks for any help....
Comment