How to identify a bad TEAPO?

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Per Hansson
    Super Moderator
    • Jul 2005
    • 5895
    • Sweden
    #1

    How to identify a bad TEAPO?

    Hi, well, as the title says I'd like to know how to check if a TEAPO cap is bad or not, since they most of the time do not bulge...

    I've got a mix of different Teapo's on my Epox 8RDA3+ rev2.0 none look bad and I have absolutely no stability problems with my computer, it never BSOD's and can run Prime95 Tortue test for 24 hours straight... the computer has been running pretty much 24/7 for 2 years and 2 months, all this with very little cooling, and yes, I do run it overclocked...

    For the VRM's Epox thankfully choosed GSC for the primary side And they have not failed either... For the secondary side there is a row of TEAPO's... The TEAPO's I can see a date on are manufacturerd 07, 06 and 05/03
    "The one who says it cannot be done should never interrupt the one who is doing it."
    Tags: None
    • Rainbow
      Badcaps Legend
      • Aug 2005
      • 1374
      #2
      Re: How to identify a bad TEAPO?

      If it works, there's nothing to fix I think the GSCs will go bad first.

        Comment

        Previous template Next

        Related Topics

        Collapse
        • iMic
          IBM NetVista Pentium III - USI Motherboard w/ Teapo SC
          by iMic
          Hi folks,

          I have a couple of IBM NetVista desktop computers from around 2000-2001. They have Universal Scientific Industrial (USI) Pro286i motherboards, 733MHz Pentium III processors, and a whole bunch of bad Teapo capacitors. One board has visibly bad and venting capacitors, while the other doesn't look too bad so far.

          The board with venting caps works fine, while the good looking board occasionally refuses to power on unless it's left for about 30 seconds after connecting the power - even with a known good power supply. (I am however aware I'll need to check the PSU...
          3 Photos
          11-29-2023, 06:44 AM
        • thesame
          DVR HIKVISION DS-7208HWI-E1/A BOARD DS-80104 REV 2.2 help identify burnt components
          by thesame
          Hy guys , i have a DVR board DS-80104 REV 2.2 that was powered wrong, i have some smds on the board that are blown and i can't identify them , maybe if someone has this board somehow and we can identify the smds', i have searched online and i can't find a schematic.
          The smds are SOT-23-6 , one of them i think it has the marking ADJF since i found another one on the board with this marking , but the other one it seems that it starts with AG or it looks like. I would really apreciate if someone could help me identify those IC's .

          ​...
          02-27-2024, 04:31 AM
        • silver60618
          Lenovo Legion 7 - Help Identify IC
          by silver60618
          Hi gang, its a long shot, but working on Lenovo Legion Pro 7 motherboard NM-F091, and trying to identify this component near GPU with marking "eHFQH" that is burned and shorting the board. Looks like power management IC

          I couldnt find any schematic or boardview. The CPU side also has same chip. Any way to identify this chip? or take measurements from the good chip to determine what it is?

          Any help would be appreciated...
          07-02-2025, 12:16 PM
        • chth96
          How can I identify varistor which have been blew up?
          by chth96
          I mistakely pluged 100v japanese retro game console to 220v outlet.
          So It seems that glass fuse and varistor have been blew up.
          I can identify that voltage and ampere value of glass fuse(250V LF 1.6A),but It is impossible to identify varistor type in my sega saturn PSU(YAMAHA 35M07U XR258)
          Is there any way to identify varistor type in my sega saturn PSU?
          Any reply would be appreciated.


          EDIT:
          It seems that I finally found out what type this black varistor is. It is Panasonic ERZV05D221 “ZNR” Transient/Surge Absorbers (Type D) Varistor Voltage...
          2 Photos
          11-26-2023, 08:52 AM
        • freakorio
          Need Help To Identify Component on Ymain LJ41-05120A
          by freakorio
          Hi guys , i hope this is the right place , i got Plasma Samsung PS-50Q91H and i need to repair Ymain LJ41-05120A , but those component are burn and i can not identify to replace those part , and the part are blue capacitor and the location are C5105 and C5106 and here i attach the part that need to identify , and one more thing , i also need to replace Zener Diode on location ZD5502 and the part are BZV55C because mine is short but i don't know the voltage because those parts are release with many type of voltage. Looking forward for your kindly reply
          1 Photo
          05-21-2024, 02:32 AM
        • Loading...
        • No more items.
        Working...