Willawake and Bushytails, this one is yours to mod. I'll gather up all the Q & A's I can find throughout the forum and begin this. You both have mod rights over this forum, so have fun and be creative. Being the admin, I can do the same as well. Tonight or tomorrow I'll start building a mass FAQ thread and see what other ideas pop into my head.
-
So I got the bright idea to remove the LED light module from the fixture and put it on top of another enclosure and keep using the zapper
The removal of light module was a successful and now I just have to cut a hole in the enclosure and put a power cord that has an on and off switch on it
You are lucky to get about two years of service out of one before the LED module starts flicking and just stops working because it is mounted on an aluminum plate and these are hard to solder on it and it is not worth messing around with them and especially this one because it has line... -
Hello everyone,
I'm working on a Huawei MateBook D16 and I'm stuck with a persistent issue. I hope someone here can help.
The problems:- Touchpad: Works perfectly in the BIOS (cursor moves), but it's completely dead once Windows starts. It doesn't appear in Device Manager.
- Display: The Intel UHD Graphics driver causes a black screen when booting Windows normally. However, in Safe Mode, the Intel driver works flawlessly and the display is stable. If I uninstall the Intel driver and use the generic Microsoft Basic Display Adapter, the screen works, but the touchpad remains
-
Samsung NP900X3E BIOS problem – original BIOS freezes, another BIOS works but internal LCD corruptedHi,
I need help with a Samsung NP900X3E-K02HU BIOS.
S/N: JDML91GD500012K
Motherboard: AMOR2-13-MONO Rev 1.0 (photo attached)
After reinstalling Windows and rebooting, the BIOS stopped working properly. 1) With my original dump (corrupted)
File: samsung_np900x3e_kiolv.bin- On power on I only get a black screen / freeze
- I cannot enter BIOS Setup
- The laptop does not boot Windows
- (External HDMI output also does not help / still freezes)
File: samsung_np900 10 saniye.bin (att... -
Activity on this forum has been increasing steadily and the workload for the moderation team as well in order to keep the place clean, so please make an effort to keep it organized.
I've been deleting more and more posts that make a mess, so take a minute before posting to make sure you make a proper request/offer.
Reminder about the rules and the organization of the "Troubleshooting Desktop Motherboards, Graphics Cards, and PC Peripherals" section.
This section and its subsections are about the following classes of devices:- Desktop computers
- All-in-one
03-31-2023, 06:17 AM -
Got a case of something new weird at work. There is an old 2nd gen Intel i3 in an old “Pizza box” shell that has a small form factor power supply. Unfortunately I forgot to take pictures and model number off it.
Anyway, I get to work and get to look at this computer. Standby LED on the PSU is on, but the computer won't start. Hmm o.k. take the battery out of the main board try again, nothing.
O.k. then… unplug the power supply from the main board and put in a full size ATX PSU (yeeeesss! Exact that blown Powerman IP that I fixed a while back), plug it in and the old...