Re: New Members - please post your introductions here
Hello everyone.
I'm from South Africa and have taken an interest in electronics. I currently work as a general technical support specialist which means software software software and networking. I am currently learning from a hardware repairs specialist and have been bitten with the bug.
I grow tired of my occupation and would like to transition to the electronic and circuitry side of life.
Re: New Members - please post your introductions here
Hi all
I'm Zero from Mexico I got an Atari 65XE home computer when I was like 10 years and since computers became my passion and hobby.
Now I have 45 years old and have a IT company where we sell datacenter stuff and provide tech support for networks and storage.
I like to thinker with electronics but don't have much spare time for that, I have some stuff waiting in line to be fixed 1 Atari 600XL, 1Arari 65 XE(worst condition I have seen so far) and was looking for some Neovo inverter when I find badcaos forum on Google, and it seems really interesting so far.
I hope we will cross some messages here and there.
Re: New Members - please post your introductions here
Hi at Everyone,
Im from Austria and found this forum while trying to repair a samsung TV.
Im a normal electrican but i try myself to spezialice on reparing electric things.
Ive already some experience with coffee machines and refigerators but to be able to repair a TV is the next higher level where i want to try myself.
So would be fine if i find here some help!
Thanks and BR
Pinky
Re: New Members - please post your introductions here
Hi all, new to the forum. I'm from Denmark and have a background in acoustic and electronic engineering . However, I mainly joined to get some advice on repairing the power delivery on an ASUS ux31e Zenbook
Re: New Members - please post your introductions here
Hi all,
Good forum and lot of information. I am basically doing repair work in Textile machinery panels. Recently my TV Sony KDL-42W650A gone dark. Diagnose is done and TCON board (T420HVN04.3-AUO) has shorted PNP transistor. After replacement same is getting hot. Seems to be some more problem. While Searching for schematic for T420HVN04.3-AUO TCON board stumbled to this site. Hope to get information and any help in industrial Drive, and controllers.
Thanks.
Re: New Members - please post your introductions here
Hello
I've been looking for a place like this since I first got started on the internet. I like working on electronic devices,here I can update my skills and share mine too;-)
Re: New Members - please post your introductions here
Hello I'm new to this forum
Very recently I was start feeling very curious about component level repairing, I think it is a very useful skill. I am just an enthusiast, not a professional nor similar
I also like old (retro) computer/consoles, and probably someday I will start repairing some of them.
Re: New Members - please post your introductions here
Hey guys, lol this kinda akward to me buh since everyone is going famous i might as well introduce myself.
M Illegal coz i believe in IT the best and fun things are never done legally.
m a computer/laptop technician since 2014,cctv maintenance and installation, backup and recovery,etc.
i joined this forum to be able to learn from you guys because i know IT is broad and not restricted to a particular group or region. i hope we all win
please help friends thinkpad T470 board CT470 series NM-A931 error post "bottom cover tamper detection error"
I've already
flashed the bios clean me and updated from the Lenovo site, then removed the switch and immediately jumped the S3 from pins 1 to 4, 2 to 3 but the problem remained the same, thank you
please help friends, I have 3 T490 units with the same case, the USB type C is completely dead, showing 20v 0 amp, loss of voltage VINT20_IN resistance to ground is fine, thank you
I think the problem is that I lost the voltage at PQ0008 pon 1 -PWRSHUTDOWN which should have been high which was picked up by R9512 VCC3SW, thank you very much for your help
Please help friends, thinkpad t480 nm-b501 is dead, help me fix it, thank you
usb meter 20v 0.00 amp, after I took the VSYS measurement the drop was only `9.2v which should have been 10.2v I measured from a normal matherboard machine, the VSYS path resistance to ground diode mode is 1900 thank you
Comment