Re: Valliant boiler board
You could be onto something, after inspecting a little more of the old board I found this (I believe it to be a relay) which looks like its been warm in places.
Whats everyones thoughts?
[url]https://ibb.co/gw45wJk[/url]
[url]https://ibb.co/dQ5WbH2[/url]Re: Valliant boiler board<br />
<br...ones thoughts?
_ASH_
Member
Last Activity: 02-17-2021, 01:59 AM
Joined: 12-08-2011
Location:
-
Re: Valliant boiler board
The newest board is about 12 months old
Thanks
AshLeave a comment:
-
Re: Valliant boiler board
This is a new board in situ, which has developed the exact same problem
[url]http://ash-group.co.uk/ashimages/3.jpg[/url]
AshRe: Valliant boiler board<br /> <br...> <br /> AshRe: Valliant boiler board
This is a new board in situ, which has developed the exact same problem
[url]http://ash-group.co.uk/ashimages/3.jpg[/url]
Leave a comment:
-
Re: Valliant boiler board
Nothing is plugged onto the board on the X22, so I didn't think that'd be the problem
Thanks
AshLast edited by _ASH_; 02-16-2021, 06:46 AM.Leave a comment:
-
Re: Valliant boiler board
I can see the picture..
Please see the links:
[url]http://ash-group.co.uk/ashimages/2.jpg[/url]
[url]http://ash-group.co.uk/ashimages/1.jpg[/url]Re: Valliant boiler board<br /> <br...es/1.jpg[/url]Re: Valliant boiler board
I can see the picture..
Please see the links:
[url]http://ash-group.co.uk/ashimages/2.jpg[/url]Leave a comment:
-
Re: Valliant boiler board
Please see below, although upon inspecting, the big black one seems to be slightly bulging, although no leakage, ive peeled the black wrap from the top and it seems to be a sealed (no the pressure cross, if you know what I mean, like on the others).. but I welcome and ideas or suggestions.
Many thanks again
ASH...Leave a comment:
-
Re: Valliant boiler board
Many thanks for your reply, ive kept one of the old boards, so ill investigate on that & post any findings.
ASHLeave a comment:
-
Re: Valliant boiler board
Many thanks for the reply.
Very true, you would have thought that there would be a better situation to put a board within a boiler.
Could you give me any ideas to look at?
Many thanks in advanceLeave a comment:
-
Valliant boiler board
Hi Guy's, ive got a valiant boiler & these are prone for the control boards failing, causing the boiler to go into a error state.
When you run the hot tap, it goes into the error state but then when you reset, these work fine until next time.
Im convinced that the problem with the boards are something simple like a relay which would cost considerable less than replacing the complete board at several hundred pounds.
I was wondering if anyone had ever done any work or knows of anything to do with boiler boards?
Many thanks in advance... -
Re: Technika tv stuck in standby
Ive stripped it down again & tried unplugging different plugs from the main board to see if it powers up but with no sucess
Now the main board part number is: T.MSD309.B51 which a quick search shows that the eprom goes faulty, so I'm thinking to order the main board Unless someone can help me to get the eprom??
ThanksLast edited by _ASH_; 08-07-2018, 03:24 PM.Leave a comment:
-
Re: Technika tv stuck in standby
Not done any power readings yet as I'm a bit unsure where to measure the voltage & got no photos yet as when I put the new power board in, i thought that would fix it. so I'm going to strip it down again later & look at it.
Thanks in advance for any help.
ASHLeave a comment:
-
Technika tv stuck in standby
Hi guy's, i have a technika 22e21b tv which is stuck in standby, from previous repairs Ive just ordered a power board & swapped it (which I've done with this), but with no joy.
Had anyone got any further suggestions to what the fault could be?
Many thanks in advance
ASH -
Re: New Members - please post your introductions here
hi guy's, I've previously been repairing anything but arnt an engineer lol, I've repaired everything from laptops to TV'sLeave a comment:
No activity results to display
Leave a comment: