Testing backlight led strips

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • MUNASHE
    New Member
    • Aug 2022
    • 5
    • South Africa
    #1

    Testing backlight led strips

    Hie everyone.
    I have an Ecco 32 inch led tv with backlights problem. It's using 2 led strips of 6 leds each. The connector from the power supply board is in the middle of the strip.Does this means they are one set of three is in parallel with the the other. I have 7.6 V on the power supply and on the connector it's labeled 18v.
    Also how do I test each strip and individual led
    I have attached a Pic of the led strip. The tv is Ecco Led TV, model no. LH32
    Please help
    Attached Files

    if you find these attachements useful please consider making a small donation to the site

    Tags: None
    • angelos
      Badcaps Veteran
      • Dec 2012
      • 573
      • South Africa
      #2
      Re: Testing backlight led strips

      Do you have a LED tester? If not get one from Screen Vision in Industria West JHB.
      011-2471300

        Comment

        Previous template Next

        Related Topics

        Collapse
        • tmhobadcap
          TCL 65S403 Backlight LED Question
          by tmhobadcap
          I got the TV from a friend. He claims that no image but sound from the TV.
          I confirmed that when shine a flashlight on to the screen, I can see the image. And this should be backlight problem.
          I open up the TV and found a few leds failed. And now I am ordering a new set of backlight strips for it.

          But there is something that I do not understand when checking the leds. I do not have an led tester. I only use a bench power supply. I first set the voltage to 3V and current to 10mA. I could not light up the led until I increase the voltage to 12V. I understand most...
          05-25-2025, 11:03 AM
        • lmcancu
          RCA RLDED 4331B: 43 inch LED TV: Backlight issue
          by lmcancu
          Hi I am having an issue with the LED backlight of this TV. I can see the picture with a flash light, so I determined it was a backlight issue.

          Initially, after opening it I found 2 shorted and 1 open LED on 2 strips (total of 4). I removed the LEDs and shorted the pads together to verify if the backlight would work.

          Testing it, I found the backlight turned on and I measured 54V when TV was in standby (off), and 100v when TV was turned on. The 4 strips each contain 9 LEDs, so 36 in all minus 3.

          Instead of putting it back together I decided to replace...
          04-01-2023, 01:11 PM
        • DanPoka
          Guide me through repairing a Dell p2210f LCD ccfl backlight monitor
          by DanPoka
          I bought this p2210f dell monitor to fix. Schematic is the same as p2210.
          Behaviour is that monitors comes on but then backlight switches off almost instantly. If I look with flashlight I can still find the "No signal message". So definitely a backlight issue. Trying to advance the issue I proved that the protection circuit is switching off the backlight by shorting out C3 and resistor to disable the INL chip then re enable by removing the short.
          This is where it gets interesting. When I disassembled the monitor to solder leads on c3 capacitor I noticed the backlight flickered...
          02-15-2025, 05:05 AM
        • Tynan Dill
          Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
          by Tynan Dill
          I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

          Upon bringing it home and plugging it up, it showed a standby light.

          I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

          The screen seems to blackout and stay black, but with a flashlight I can see the display.

          With my Playstation 4 connected via HDMI, and running a game I can hear sound.

          Assuming...
          ORIGINAL POWER SUPPLY BOARD
          7 Photos
          11-22-2024, 01:46 PM
        • Comp_Pro
          No Backlight Macbook A1990 820-01041
          by Comp_Pro
          Hello all,

          Am trying to figure out this backlight issue with this A1990 Macbook Pro.

          Tests performed:

          There is no backlight even with a good screen.
          Backlight IC is receiving the correct support voltages.
          Fuse F8400 ok
          Current sense resistor R8400 ok
          Backlight IC is receiving 3.3V on enable pin.
          Backlight IC receiving voltage from PPBUS_G3H, aprox 12.5V.
          Backlight IC receiving 5V from PP5V_G3S
          Backlight IC BKLT_SCL and BKLT_SDA both measure 0.545V diode mode to ground
          I2C_BKLT_SCL and I2C_BKLT_SDA both measure...
          05-06-2024, 10:23 PM
        • Loading...
        • No more items.
        Working...