Anyone in Belfast UK that replaces LED strips?

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • cheeky2
    Badcaps Veteran
    • Dec 2012
    • 337
    • uk
    #1

    Anyone in Belfast UK that replaces LED strips?

    I have a diagnosed with an Ebay customer who is in Belfast UK who has a 32inch LED set that has failed LED's on it. Does anyone know of a reasonable priced person in Belfast or the surrounding area that does this type of repairs please?
    I obviously don't wish to advertise anyone's services here so please just PM me thanks and I will pass the information onto the Ebay Customer.
    Thanks Anthony
    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • Kingfreddie
      LED problem on samsung UE55F6475, 2 strips work. The rest is flashing every second.
      by Kingfreddie
      Ok.. this is the story:
      Have an old Samsung LED 3D TV (UE55F6475). First it started to lose light on the lower 40% of the screen now and then. Like for 10-60 mins and then it would work again. Then a bit later it just got stuck in that position. The lower 40% of the screen is dark, and it gets progressively darker the lower u go so it's obviously that LED strips where not working. I also looked for similar errors online and saw an exact copy and on that one it was faulty LED strips.

      This is kinda how it looked, just that mine were at the bottom of the screen:

      ...
      09-11-2021, 01:57 AM
    • mecha1166
      Anyone here fix a tv and customer cracks panel when they get it home?
      by mecha1166
      About 2 times a year, a customer will do this. We fix the tv, put it on test play, and customer sees it working. They see me pull power and video wire. Sometimes I pick up tv, right in front of them, and carry it out to their vehicle while they are next to me. I set it in their tv gently, and tell them the tv is very fragile, be careful with it. I let them close the door/trunk. That day, or a few days later, they tell me there is a crack inside the tv. Normally I tell them transportation is their responsibility and normally that is the end of it. Has anyone had a customer that was not buying this...
      03-29-2024, 11:27 AM
    • edugimeno
      Help findinf LED strips for TDSystems K32DLT1H
      by edugimeno
      Hi There!
      I bought a broken 32" TV today. It has sound but no image. I checked with a flashlight and it was missing backlight
      Disassembled down to the led strips and found this TV has been serviced before. Not sure if it was fixed, worked again for some time, and broke again, or maybe last repair wasn't successful

      Looks like on previous repair, the center LED strip was replaced with a different model, 7 leds in it instead of 8, but when checking LEDS one by one, leds on the center strip were brighter with same test voltage (multimeter in DIODE mode) so maybe the...
      11-05-2022, 03:36 PM
    • eccerr0r
      What to do with bad LED strips?
      by eccerr0r
      I suspect a lot of you have done a lot of repairs and end up with a lot of bad LED strips...what do you do with them?

      Wonder if I should get a pile of LED chips and try to replace the bad units for the heck of it, but I don't really need the strips at the moment because I bought the strips...

      Oh... and I think I got my TV working again, though not 100% I don't think, on a white screen I can see a bit of the ghost of the LED strips, must have done something wrong or the LED strips aren't quite the same as the original...
      10-22-2022, 12:27 AM
    • h4rdw4re
      Grundig 40VLE7131BF led strips doesn't light up
      by h4rdw4re
      Hi guys,
      I have one very old TV.
      Main problem I have with this tv is that led strips won't light.
      I measured voltage levels, and inverter input is 24V.
      other voltages are also ok.
      What I found is that removing and connecting again connector CN1 led strips lights for shorts time (but only once). When led strips lights up then light is uniformly spread on whole panel.
      First I thought that led strips are dead, but I'm quite sure that problem is not strips related.
      I don't know what voltage level is at output of inverter board (samsung SSL400_3E2A) and how...
      10-09-2022, 11:10 AM
    • Loading...
    • No more items.
    Working...