JVC LT-32VF52K - Boot Loop - Nand Flash Steps

[mijatovic86]

Hi everyone,

I have an issue with JVC LT-32VF52K, that is chassis Vestel 17MB110.

It just flashes Logo JVC and then red led flashes for 12-13 times.

Tried with flashing SPI MX25L1606 but acts identically with it also.

How can I try and flash the NAND using only USB ?

Can it be done with USB flash drive and usb_auto_update_A1.txt file, and what should be the content of that file ?

I did find a nand dump on elektroda.pl, just need to be sure how to flash it ? Its LED JVC LT-32VF52K_NAND.BIN around 540MB large


Thank you in advance

Regards

[mijatovic86]

Re: JVC LT-32VF52K - Boot Loop - Nand Flash Steps

No ideas ?

[comptek]

Re: JVC LT-32VF52K - Boot Loop - Nand Flash Steps

Remove WiFi card ?