Samsung ue49mu6120

[paridelab]

Re: Samsung ue49mu6120

Try

nothing makes the same defect

[lotas]

Re: Samsung ue49mu6120

Try this one too.

[paridelab]

Re: Samsung ue49mu6120

Try this one too.

with this you don't see the SMART TV logo, but it still makes the same defect

[lotas]

Re: Samsung ue49mu6120

Then it turns out that the problem is in eMMC (it does not boot further).

[Davi.p]

Re: Samsung ue49mu6120

sorry i have seen reply late, the fault is in the panel for me, the same old fault, something shorted maybe in gate drivers, maybe in the panel small boards.. check if you have channels audio by putting in antenna cable and search for a good channel.. ** better to open own thread because of different model / symptom by the original thread!!! **

[paridelab]

Re: Samsung ue49mu6120

sorry i have seen reply late, the fault is in the panel for me, the same old fault, something shorted maybe in gate drivers, maybe in the panel small boards.. check if you have channels audio by putting in antenna cable and search for a good channel.. ** better to open own thread because of different model / symptom by the original thread!!! **

I don't think it's the panel because in addition to not hearing the audio, it stays blocked and won't even let me turn it off from the remote control

[Davi.p]

Re: Samsung ue49mu6120

post the main board bn41 code
it is not correct that one tv that pulses the status led is a tv with good standby software, sometimes not, already proven, so ask lotas or someone else for the correct spi file, then if it doesn't work try another file.

[paridelab]

Re: Samsung ue49mu6120

post the main board bn41 code
it is not correct that one tv that pulses the status led is a tv with good standby software, sometimes not, already proven, so ask lotas or someone else for the correct spi file, then if it doesn't work try another file.

I make a video and see if I can upload it to show you the precise defect

[Davi.p]

Re: Samsung ue49mu6120

if you have no video then you can simply explain the blinking sequence, no need of video clip (?)

[paridelab]

Re: Samsung ue49mu6120

if you have no video then you can simply explain the blinking sequence, no need of video clip (?)

the LED does not flash, i plug it in and the TV starts by itself showing the SMART TV logo for about 2 seconds and then disappears, only the backlight stays on. If I then try to turn it off from the remote control or from the button it doesn't turn off

[lotas]

Re: Samsung ue49mu6120

the LED does not flash, i plug it in and the TV starts by itself showing the SMART TV logo for about 2 seconds and then disappears, only the backlight stays on. If I then try to turn it off from the remote control or from the button it doesn't turn off

Well, another option, try this dump

[Davi.p]

Re: Samsung ue49mu6120

Sorry, maybe i have confused the post from someone else, with this type of defect the main software could be the culprit, don't waste time flashing the spi..

[lotas]

Re: Samsung ue49mu6120

Sorry, maybe i have confused the post from someone else, with this type of defect the main software could be the culprit, don't waste time flashing the spi..

Yes, I already wrote that the problem is most likely in eMMC.

[paridelab]

Re: Samsung ue49mu6120

Yes, I already wrote that the problem is most likely in eMMC.

and the emmc I can not flash it? i have a tl866

[Davi.p]

Re: Samsung ue49mu6120

no, you need at least a T48

[torrephone19]

Re: Samsung ue49mu6120

Samsung UE49MU6445UXXC

[lotas]

Re: Samsung ue49mu6120

Samsung UE49MU6445UXXC

???

[torrephone19]

Re: Samsung ue49mu6120

Samsung UE49MU6445UXXC

[son_goku1976]

Samsung ue40mu6400uxzt

buonasera ..anche io ho lo stesso problema della 25w40 corrotta .....potete aiutarmi in qualche modo.....difetto riscontrato led standby spento staccando connettore collegamento main board solo retro illuminazione. Provato un dump trovato in rete , e' tornato standby ma non si accende .....vi ringrazio in anticipo .... allego dump originale 25q40

MAINBOARD : BN94-12398F
CODE: BN41-02568B
MODEL: BN41-02568
PANNELLO : BN95-03473A CY-KK040HGNV2H
PANEL REV.00 BN96-39904B REV.01 BN39821C
BN64-03429A

[lotas]

Re: Samsung ue40mu6400uxzt

buonasera ..anche io ho lo stesso problema della 25w40 corrotta .....potete aiutarmi in qualche modo.....difetto riscontrato led standby spento staccando connettore collegamento main board solo retro illuminazione. Provato un dump trovato in rete , e' tornato standby ma non si accende .....vi ringrazio in anticipo .... allego dump originale 25q40

MAINBOARD : BN94-12398F
CODE: BN41-02568B
MODEL: BN41-02568
PANNELLO : BN95-03473A CY-KK040HGNV2H
PANEL REV.00 BN96-39904B REV.01 BN39821C
BN64-03429A

Try.