I have a part that blew on the power supply board of my Olevia tv, Can anyone tell me what part this is?? I believe that it's a Capacitor, but I can't find the value on it....it came out of the Power board LT 1 port, is green, and it has "SCK" and "057" markings on it.
-
-
Re: Olevia 37" LCD part....
I am widely reputed to be a miracle worker. I can walk on water (provided it frozen), see the future (after it happens), and almost raise the dead (before they got sick). With all those powers, I can't figure out what the part is.Originally posted by sheepdog120
BUT you can help. There is this device called a CAMERA. With it you can take a picture of this unknown device and attach it to your next post. Also, take a picture of the area on the PC board where this item came from. Don't forget to read the FAQ on inserting pictures in your post.
PlainBillFor a number of reasons, both health and personal, I will no longer be active on this board. Any PMs asking for assistance will be ignored.
Never be afraid to try something new. Remember, amateurs built the ark. Professionals built the Titanic. -
Re: Olevia 37" LCD part....
Thanks for reading my Post Bill....I don't have a digital camera, but here is a pict of the board that I found online, the part that I'm talking about is the green "thing" at the top right.....
Comment
-
Re: Olevia 37" LCD part....
Here's a better picture of an actual replacement board with an arrow pointing to the "mystery" part......Thanks in advance for your help!!
Comment
-
Re: Olevia 37" LCD part....
I was all set to rip you another one, then realized I hadn't asked the question. What is the identifier printed on the board next to the part? It could be a ceramic capacitor, but I think it's a NTC thermistor. It's there to reduce the power surge when the TV is turned on.
PlainBillFor a number of reasons, both health and personal, I will no longer be active on this board. Any PMs asking for assistance will be ignored.
Never be afraid to try something new. Remember, amateurs built the ark. Professionals built the Titanic.Comment
-
Re: Olevia 37" LCD part....
Yes, NTC. Grab one from dead board from any stuff that has it to get you going.
Cheers, WizardComment
-
Hi, this is my personal laptop, which the original board (lets call it Board A) blew up PU8700 (TPS51486), making a hole on the board, i had left the laptop at my desk one day with the battery fully charged and didn't touch it for a week, but when i tried to turn it on it didn't
Thought the battery was dead, so i plugged in the charger then tried to power on, the power LED blinked once, charged LED still orange, unplugged the charger, plugged in again and I noticed the "magic smoke" smell, so i unplugged the charger, removed the back cover and saw the blown IC (the "magic... -
Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.
Upon bringing it home and plugging it up, it showed a standby light.
I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.
The screen seems to blackout and stay black, but with a flashlight I can see the display.
With my Playstation 4 connected via HDMI, and running a game I can hear sound.
Assuming... -
Hello my friends!
I have a question that I think you can answer and help me with!
I have a faulty main board from an led TV. And I found the same part number board and design but is from a 43" TV and I want to use it on a 65". On its stickers , all are the same except the wattage for the LEDs backlight, both state different watts and LED Voltages!
So I presume that the backlight inverter section from the replacement board has lower wattage then the original one, am I right?
My concern is that the board won't draw enough voltage to the bac... -
I am trying to find this part on the logic board. See pictures below. It might be CR812, not sure. Any help would be appreciated. And where could I find the part? -
Hi There,
This TV was auto switching off after few seconds with some vertical lines on the screen, so got a new TCON board and replaced it.
After replacing the TCON board it was working fine and i set it up with everything, used for few hours, then had the bright idea to update the software on it. During the update process, TV switched off and now no audio or video. No relay switch sound.
More Details
TV Model - LG OLED77G1PUA
Got the same exact TCON board from TVPartsToday and replaced it. But didnt transfer the EPPROM data (didnt...
Comment