Panasonic tx-40cx400b not responding to remote control

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Chrissygizmo
    Senior Member
    • Mar 2021
    • 108
    • United Kingdom

    #1

    Panasonic tx-40cx400b not responding to remote control

    Hi all

    I've just repaired the backlights on this tv. I didn't get a remote with it so I'm using a universal one. The tv works properly via the buttons on the back but the only remote command it registers is the power off. It will power on if I try immediately after switching off, if I leave it until the standby light stops blinking then it won't turn on again from the remote.
    I don't think the remote is at fault as I've got other remotes that do exactly the same thing.
    Any help would be really appreciated....

    Thank you
    Attached Files
  • CapLeaker
    Leaking Member
    • Dec 2014
    • 7976
    • Canada

    #2
    Re: Panasonic tx-40cx400b not responding to remote control

    Probably it’s the wrong code programmed.

    Comment

    Related Topics

    Collapse

    • dfear
      hitachi 75hl16t64u - not responding to remote control
      by dfear
      I have a hitachi 75hl16t64u tv in for repair and it is driving me crazy.
      It came in for a power issue which I have finally resolved by replacing the power supply.

      The current issue is that the TV does not respond to the remote control. I have replaced the IR sensor board with a used one but the fault persists.

      Anyone have a clue how to fix TV?

      FYI: I have checked the remote work s by pointing it at my camera on my phone....
      09-02-2024, 12:15 PM
    • tmhobadcap
      Pioneer VSX-522-K remote control not working???
      by tmhobadcap
      I have this receiver for at least 10 years. Usually, we just use the remote for turning on/off and adjusting the volume. Recently, the remote control started not able to turn the receiver on. Later, the volume also could not be adjusted by the remote control.

      At first, I thought that it was the usual problem which can be fixed by cleaning the contacts on the switches and the pcb. I opened the remote and clean it with alcohol. The remote did work again after that. But after one day, it did not work again. I opened it again and clean with alcohol and contact cleaner. Again it worked...
      12-24-2020, 01:44 AM
    • piipo
      Old Privileg 5.1 speakers remote control question
      by piipo
      Hi, I have an old Privileg brand 5.1 speakers. I have lost the remote control. I have an universal Harmony remote but there is no Privileg brand in it's software to add. Does anybody have an idea what alternative brand for a remote can I try instead? I'm attaching an image of what the speakers looks like. The image shows 2 main speakers, they are 5 + 1 in total. Thank you very much
      09-18-2024, 01:55 AM
    • hemant_2222
      Schematic for Denon Remote Control RC1156
      by hemant_2222
      Hello Everyone,

      Hope everyone is enjoying their repairs at hand!.

      I am looking forward to get the schematic of Denon remote control RC1156. Actually long time no use of the remote leaked the battery thereby corroding few parts as well as the tracks.

      I was able to join few of them but the remote is still not working, so i am looking forward for your help, in case anyone understand the schematic or the remote circuit diagram and could me assist me in repairing it.

      Please refer to the attached picture, i think the voltage divider is missing...
      10-06-2023, 02:05 AM
    • t4796
      Fujitsu Aircon remote control
      by t4796
      I managed to drop this recently. It fell flat and square onto the floor from about 1.8m. Can't remember if face up or face down.
      The remote still kinda works but the display is blank and only shows up if I repeatedly flick the little silver crystal/oscillator looking thing on the board.

      Not sure if this part is the culprit or if flicking it is moving something else, but it seems localised to that component as far as I can tell.

      Having trouble working out the value of it since it doesn't seem to have anything other than a brand name printed on the side of it....
      01-03-2025, 11:24 PM
    • Loading...
    • No more items.
    Working...