LG 47LY330C Main board problems.

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • ZOrd_Z
    Senior Member
    • Jul 2013
    • 80
    • Portugal
    #1

    LG 47LY330C Main board problems.

    Hi.

    I have two LG 47LY330C with main board problems - no image. Tv's have back light, status led ok, and turn on or of if the power button is pressed.
    I have 5 main board's EAX654486303 (1.0) with the same problem. Tried reflow in one, firmware and flash from ones to others. Got nothing. I'. the rest is ok, i had a good main board to test, tv is now far away...

    The panel is a LC470DUE (FG) (A3)

    Does any one have a firmware for this panel or a better idea?

    Thank's
    Tags: None
    • lotas
      Badcaps Legend
      • Jan 2016
      • 4554
      • Russia
      #2
      Re: LG 47LY330C Main board problems.

      So it can be problematic in T-Con - 6870C-0481A
      Attached Files

        Comment

        • ZOrd_Z
          Senior Member
          • Jul 2013
          • 80
          • Portugal
          #3
          Re: LG 47LY330C Main board problems.

          Originally posted by lotas
          So it can be problematic in T-Con - 6870C-0481A
          No. I know T both t-con are ok. I think cpu issue on all boards or firmware, due to the fact that firmware is not the same for different panels.

          Thank's...

            Comment

            • lotas
              Badcaps Legend
              • Jan 2016
              • 4554
              • Russia
              #4
              Re: LG 47LY330C Main board problems.

              There is a firmware for LG 47LY345C-ZA EAX65486303 (1.0) H27U1G8F2CTR, MX25L8005, right?

                Comment

                Previous template Next

                Related Topics

                Collapse
                • jb_Bak
                  Sony xbr-65x900c main board issues?
                  by jb_Bak
                  Hey guys great forum glad to have found it. I bought a Sony XBR 65X900C cheaply because it didn't work. No signs of life at all not even a light/led. All I hear is a brief high voltage sound when I throw the power to it.

                  Didn't see any obvious signs of damage so right away started checking voltages. This is what I see:
                  Power Board Connector that goes to Main board
                  CN6401
                  Pin 01 NC
                  Pin 02 NC
                  Pin 03 "BL_ON": 0V
                  Pin 04 "N/C"
                  Pin 05 "STBY 3.3V": 3.5V
                  Pin 06 "GND": N/C
                  Pin 07 "AC_OFF"...
                  09-27-2021, 04:52 PM
                • JDC
                  (SOLVED) - ONN 100012588 No Power, Then Rebooting After Main Board Change
                  by JDC
                  ONN 100012588
                  Issue: No Power, Then Rebooting After Main Board Change

                  Short answer: replace main board and power board
                  Technical answer: replace main board and Q306 & Q307 on power board.

                  Long answer:

                  TV wouldn't turn on. Power switch was fine which means the main board isn't processing the power on signal. Replaced main board. TV turns on now but randomly reboots. Bad main board? EEPROM? Tried to pull main board and got a shock touching the corner of the board. That's weird. C334 (450V 10uf) capacitor is still holding a high charge....
                  07-15-2022, 07:39 AM
                • m1ch43lzm
                  HP Pavilion 15-eh Board DAG7HAMB8F0 - CPU throttling to 0.4GHz (PROCHOT_EXT) and black screen
                  by m1ch43lzm
                  Hi, this is my personal laptop, which the original board (lets call it Board A) blew up PU8700 (TPS51486), making a hole on the board, i had left the laptop at my desk one day with the battery fully charged and didn't touch it for a week, but when i tried to turn it on it didn't
                  Thought the battery was dead, so i plugged in the charger then tried to power on, the power LED blinked once, charged LED still orange, unplugged the charger, plugged in again and I noticed the "magic smoke" smell, so i unplugged the charger, removed the back cover and saw the blown IC (the "magic...
                  05-12-2025, 08:37 PM
                • advant
                  Driving a Sharp TCON/panel with a universal main board
                  by advant
                  This thread is about trying to get an Universal Main Board to work with a Sharp TCON and panel.

                  I have a Sharp LC-46D85UN TV that has had a main board issue. Since this model is from 2009, I am not able to find an exact replacement of the main board. Instead, I decided to see if I can future proof this tv by getting a Universal Main Board (T53U21.2) from China to work with the Sharp TCON (CPWBX4291TPZA) and panel. The universal main board supports a 8 bit dual channel LVDS interface whereas the TCON requires a 10 bit dual channel LVDS input. I have modded the LVDS connector to match...
                  02-03-2020, 12:25 AM
                • Rene77
                  GTX 680 problems, Wrecks main board
                  by Rene77
                  i tested this Asus gtx 680 which came with a bunch of computer stuff.

                  When i only connected the 8 pin, the PC still started and gave the error on the display that also the 6 pin needed power.
                  when all connectors where powered and both leds were green, the PC did not boot, Fans where running, but nothing else.
                  Even when removing the GTX this failure kept on the main board.
                  No boot, no beeps, only the fans running, nothing else.

                  main board was a Asus B85m-G, PSU 650 Watt.

                  Tried a second (old) main board with a dual core, same...
                  12-29-2022, 02:18 AM
                • Loading...
                • No more items.
                Working...