Sony KDL-46EX500 2 blinks, then 6 blinks

Collapse
X
Collapse
 
  • Page of 4
  • Time
  • Show
Clear All
new posts
Previous 1 2 3 4 template Next
  • chrisl32
    Member
    • Feb 2021
    • 39
    • france
    #61
    Re: Sony KDL-46EX500 2 blinks, then 6 blinks

    Thank you budm.

    I have already read the attached document (I spent so much time on this forum ;-), and it helped me to understand and solve the problem...
    Last edited by chrisl32; 04-28-2021, 02:49 AM.

      Comment

      Previous 1 2 3 4 template Next

      Related Topics

      Collapse
      • AK_777
        Sony KD-65A1 Repair – 4 Red Blinks Error
        by AK_777
        Hi everyone!
        I have a Sony KD-65A1 TV with a fault – 4 red LED blinks. After disassembly and visual inspection, I found that the G76 power board and DKA board had been replaced. It is also possible that TCON was replaced, but I am not sure – there are a few marker marks that could be factory-made.

        Based on assumptions, the previous service attempted to solve the issue by replacing potentially faulty components. I decided to investigate further, found a service manual, and figured out a way to power up the power supply unit autonomously and put the OLED panel and...
        02-20-2025, 04:15 PM
      • jchon
        Sony A1e 5-blinks help
        by jchon
        Hi I'm new to trying to repair TVs, but I saw a broken OLED offered for a reasonable price and thought I'd try my hand at it.

        I found the service manual, which was critical to know where to probe.
        https://www.manualslib.com/manual/20...1e-Series.html

        With it I was able to determine that my DKA board was bad, when P_ON#1/2 gets enabled REG_12 on the DKA board collapses. I'm assuming one of the downstream regulators has a short, but I couldn't work out which rail/component and replaced the DKA board entirely.

        Unfortunately the 5-blinks...
        06-28-2023, 11:52 AM
      • Nicktronic
        Sony XBR-65X850D 2 Red Blinks
        by Nicktronic
        Hi all,

        I have the subject TV and it will work normally sometimes but suddenly go black and give the 2 red blinks blink code. When this happens, I check the power supply board voltages and all I have is the Standby 3.3V and BL_ERR 2.2V. When it's working normally, all power supply board voltages look normal and stable. I've checked the backlights with a tester and they all test good. I've also read that the 2 red blinks is a faulty power supply board, so could it be throwing up an erroneous BL_ERR?

        Any Sony experts out there that can help??...
        11-19-2023, 06:51 AM
      • dumbdd
        Sony 75X9400E TV.. 5 Red blinks
        by dumbdd
        I was using this TV for 5 years before it stopped working. I like this TV and would love to fix it myself.*

        When I press the power button, the white led comes on (sony calls the module smart core) and then it switches over to 5 red blinks. No screen, no backlight, no relay click, nothing. I have disassembled the tv and found the service manual for 75x940e online. The manual suggests a faulty power board, TCON or the panel.**

        The standby pin is at 3.3V. Fuses on the mainboard and TCON are fine. Caps on TCON also seem to be fine. When I turn on the tv the white led...
        07-01-2023, 08:54 PM
      • Nicktronic
        Sony XR-55X90J 4 blinks
        by Nicktronic
        Hey guys, got this Sony that turns on momentarily and then goes black with 4 blinks of the standby light. I can't find a service manual, but best guess was the Local Dimming board based on a similar TV saying LD_ERR or BCM_ERR. I found a replacement, but it didn't work. Before I put more money into replacement boards, Im wondering if anybody has seen this issue and what worked for them, or has the service manual for this specific TV.

        Thanks!...
        02-13-2024, 07:01 PM
      • Loading...
      • No more items.
      Working...