Hi,
I have a Samsung LE40A676 with the same phenomena as these posts:
https://www.badcaps.net/forum/showthread.php?t=73891
https://www.badcaps.net/forum/showthread.php?t=45913
Blinking red LED and several minutes to start up.
I have checked the PSU board and there's no visibly bad caps. I have also measured all caps on the PSU board an they all seem to be Ok, just to be shure.
Does any one know if there's a "bad C102" or similar on this main/video board to replace, as the talk about in the linked threads above?
I can't see any caps that looks bad or anything else that not looks as it should.
(I'm sorry if you find this post in another thread but I wasn't able to remove my other post)
I have a Samsung LE40A676 with the same phenomena as these posts:
https://www.badcaps.net/forum/showthread.php?t=73891
https://www.badcaps.net/forum/showthread.php?t=45913
Blinking red LED and several minutes to start up.
I have checked the PSU board and there's no visibly bad caps. I have also measured all caps on the PSU board an they all seem to be Ok, just to be shure.
Does any one know if there's a "bad C102" or similar on this main/video board to replace, as the talk about in the linked threads above?
I can't see any caps that looks bad or anything else that not looks as it should.
(I'm sorry if you find this post in another thread but I wasn't able to remove my other post)
Comment