SONY KDL 43w805c does not accept commands

[Diah]

Re: SONY KDL 43w805c does not accept commands

Hi apologies for late reply .

Please don't cook the main CPU .

Far as i am aware , this set suffers with EMMC chip issue & yes the company i mention microtech , based in Bolton can sort it .

Regards Zen

explain what emmc to do with notification and IR signal... dont make advertisement to company you mentioned 10 time over this forum since you are registered,

one things more i will pay you 1000 $ if you can remark the emmc you are talking on at his boards... the photo he upload too LOL... keep silent and learn.

[zens electronics]

Re: SONY KDL 43w805c does not accept commands

Hi apologies for late reply .

Please don't cook the main CPU .

Far as i am aware , this set suffers with EMMC chip issue & yes the company i mention microtech , based in Bolton can sort it .

Regards Zen

[Diah]

Re: SONY KDL 43w805c does not accept commands

if toaster.. then the following
1- prepare the main boards
A- cover all sockets ( plastic ) with Aluminum Foil.. be sure the foil didn't touch the sockets such scart... audio Optic Out. LAN, video & audio in plugs , CI decoder
2- Test the boards size at the toaster to locate best place you will put it inside on plate
3- turn on the toaster full temperature and wait until it reach high temperature as the plate too
4- place the boards on the plate and close the door for 10 minutes if the temperature are round 280 degree
5- turn off the toaster.. carefully open its door with out let the boards shocking or moved
6- wait until its cooling down than take it out..
good luck

[Dobsuk]

Re: SONY KDL 43w805c does not accept commands

Lets go for the toaster? Or oven? Which will be more prospective?

[Diah]

Re: SONY KDL 43w805c does not accept commands

which equipment are you going to use ? always please show me so no mistake done.

[Dobsuk]

Re: SONY KDL 43w805c does not accept commands

i used always Korean infrared BBQ grill.. LOL

OK. How to proceed?

[Dobsuk]

Re: SONY KDL 43w805c does not accept commands

OK. I have got oven, toaster and frying pan. Which one to use I would suggest the pan ))

[Diah]

Re: SONY KDL 43w805c does not accept commands

i used always Korean infrared BBQ grill.. LOL

[Diah]

Re: SONY KDL 43w805c does not accept commands

no joking.. i dont know what do you have at home to apply complete heat at once to the board..

[Dobsuk]

Re: SONY KDL 43w805c does not accept commands

Are you joking, mate? Do you want me to put the board in the toaster?

[Diah]

Re: SONY KDL 43w805c does not accept commands

yes... but this time packing the boards complete at the kitchen often ... with high temperature and dont use air flow function .... or if you have toaster... etc... maybe the the BGA at the sandwich ... who knows... so better we go with this method

[Dobsuk]

Re: SONY KDL 43w805c does not accept commands

Nope, it is absolutely the same Shall i heat it again?

[Diah]

Re: SONY KDL 43w805c does not accept commands

Can i try it without this heat sink just for 1min?

you can for more than 10 minute too

[Dobsuk]

Re: SONY KDL 43w805c does not accept commands

Can i try it without this heat sink just for 1min?

[Diah]

Re: SONY KDL 43w805c does not accept commands

Done! Now i need to find my thermal paste

try it before you apply the paste

[Dobsuk]

Re: SONY KDL 43w805c does not accept commands

Done! Now i need to find my thermal paste

[Diah]

Re: SONY KDL 43w805c does not accept commands

Haha, no not for pipes I think i can use my one:

okay ... but you need first to cover all around the chip for example the glue plaster used by wall or car painting... to avoid the blow hot air fly one SMT parts near to the chip.

after that let this gun to the maximum heat ,,,let it run far from the board until it reach the high temperature if it was 350 degree, then face it to the chip area and calculate 6 second .. such 11 , 12, 13, 14, 15, 16 then leave it cool down

[Dobsuk]

Re: SONY KDL 43w805c does not accept commands

Haha, no not for pipes I think i can use my one:

[Diah]

Re: SONY KDL 43w805c does not accept commands

Errmm, that is the problem. I do not have proper electronic hot air gun. I've got one bigger and i am not sure if i can use it for that.

dont worry LOL.... do you mean the one used for Pipe sanitary?

[Dobsuk]

Re: SONY KDL 43w805c does not accept commands

which heat equipment do you have ? show me to let the work being perfect this area i mean

Errmm, that is the problem. I do not have proper electronic hot air gun. I've got one bigger and i am not sure if i can use it for that.