Pn60f5500

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • tvtimmy
    Badcaps Legend
    • Mar 2015
    • 1160
    • usa
    #1

    Pn60f5500

    I picked up a 2013 Samsung plasma model number pn60f5500 for free today. Owner said the standby light would flash. I had a feeling that it was all due to a bad ceramic cap(10uf 50v) on the ysus board. I was right again! It works perfectly. I have repaired other models that have 3 of them in parallel before, but this one only had one with holes unused for a second one.
    Attached Files
    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • BC_TechForum_drb
      Missing enable on +5v sec pwr rail AMD Firepro D500-B/Mac Pro late 2013
      by BC_TechForum_drb
      Sub: Missing enable on +5v sec pwr rail AMD Firepro D500-B/Mac Pro late 2013

      Ref: 1/ MacPro6,1 Late 2013/A1481 MD878LL/A (3.5 GHz 6 Core Xeon E5-1650v2)
      Gfx-B: APN: 661-7548 PPN: 820-3533-A AMD FirePro D500-B 3GB Vmem
      2/ Figure 1 Gfx-D500-B Front Facing
      3/ Figure 2 +5v supply (zoom-in)

      Intro:
      While troubleshooting a Mac Pro(6,1) referenced above I discovered the +5v secondary supply did not stand up on the D500-B graphics card as a result of a missing enable signal. The +3.3v secondary rail was the only rail that did standup. I tried to perform...
      12-07-2023, 09:55 PM
    • djty
      MBP 2013 15" 820-3787 no keyboard, no touchpad
      by djty
      Device: Laptop
      Brand: Apple
      Model: MacBook Pro
      Board number: 820-3787-06
      Problem:
      • no keyboard, no trackpad
      • Fans Spinning fast
      Hello everyone. The MacBook pro late 2013 keyboard is not responses even when trackpad is disconnected.
      no reaction on KB, only power button andd ctrl alt shift, which are on keyboard connectore are separately on the KB pinout KB backlight is present the PP3V3_S4 and PP3V42_G3H one keyboard connector J4813 are present on keyboard
      external USB keyboard works Should touchpad be connected to motherboard for KB to be working?
      ...
      03-17-2025, 11:03 AM
    • Silent18
      razer blade 14 2013 rz09 0102x
      by Silent18
      Guys do you have razer blade 14 2013 rz09 0102x bios....
      thanks in advance!!!
      07-01-2024, 11:48 PM
    • avneeshshrotria
      Mac Pro 2013 a1481
      by avneeshshrotria
      Hey wonderful that you got the system booted .
      I came across this thread in the hopes to find a schematic for the a1481 , I believe they don't exist . Please correct me if I'm wrong. Also if you'd post them i'd be greatful .


      i have a Mac Pro 2013 a1481 with led 2 , 3, 5 remaining on and then the system tries to boot to s0 , with led 6, led 7 ie s0 and s4 turning on simultaneously and Turing off .
      I don't have a doner board nor schematics … hence trying to figure out where to start to probe . I've checked all connectors and cables which a seated and working fine...
      04-05-2024, 06:48 PM
    • bogosort
      A1398 15” 2013 short when screen plugged in
      by bogosort
      Hello,

      I have a MacBook Pro 15” A1398 2013 that has no backlight, but I see an image when putting light through the logo. I noticed that when the screen is plugged in, I get a 300 ohms short (see image).

      When unplugged, the short is gone.

      Any idea?
      1 Photo
      02-04-2024, 01:06 PM
    • Loading...
    • No more items.
    Working...