panasonic th-50px-50u black vertical stripe

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • glaw
    New Member
    • Nov 2020
    • 3
    • USA
    #1

    panasonic th-50px-50u black vertical stripe

    Hoping to figure out if the panel is done. A week or so ago this stripe appeared on right side of display. It is there with all inputs. Pictures attached. the picture and audio are not affected. I tried disconnecting ribbon from buffer to panel and it does not change. Disconnecting the ribbon next to it yields the expected white stripe. There are vertical buffers on top and bottom therefore the 1/2 screen stripe.
    There are green and yellow lines on top and left side of stripe and multi-color lines on right side.

    My suspicion is that the panel is the cause because there is no change with buffer ribbon disconnected but I would welcome any experience or thoughts. I know it is old but it has a great picture and all.

    Thanks,
    Greg
    Attached Files
    Tags: None
    • glaw
      New Member
      • Nov 2020
      • 3
      • USA
      #2
      Re: panasonic th-50px-50u black vertical stripe

      Another close image
      Attached Files

        Comment

        Previous template Next

        Related Topics

        Collapse
        • Rescogitans
          Panasonic cf 20 will no longer boot-only black screen
          by Rescogitans
          Hello all. Only my second post.

          I have a panasonic CF-20C5142VM which was booting to bios with no issues. I needed to add an ssd that was not initially being recognized by the bios. Found a link that suggested that I disable uefi mode and clear keys then to reboot to allow bios to now see New ssd. After restarting, screen is entirely black with no image. Found another post that suggested unplugging bios battery because some remnants of the bios may still exist in other parts of board but did not fix issue-screen is still black.
          Anyone run across something like this before?...
          12-07-2022, 12:04 PM
        • Ancient1
          Strange LG TV issue : Image vertical lines in black screen
          by Ancient1
          Hi

          Asking for a friend.

          I'm used to black vertical line in otherwise good image - probable solution is a rubber to push and tighten the COFs bonding.
          but here its the opposite !

          TV has new T-con = same issue
          A missing panel voltage would have global effect

          So , what should one do ? how can I find where the fault is ?

          Thanks !...
          02-05-2025, 03:37 PM
        • Ama Chur
          Panasonic Viera LC470EUN (SE)(M2) T-Con issue?
          by Ama Chur
          After watching some youtube videos and checking some forums, I'm at a loss. With both ribbon cables connected, we have no image. With the left one pulled out, the screen is black and white, split down the middle. With the right cable removed, it is all black. Backlight is working fine and we have sound and can open applications. We are strapped for money right now and are hoping to repair whatever the issue may be. I think the TV was manufactured in 2012, so I'm aware that may not be possible. Edit: Found a single vertical line of blue pixels on the left side of the screen with one of the ribbon...
          02-21-2025, 08:12 PM
        • Rensiee
          Panasonic TH-50PX8EA Black screen, only relay clicks
          by Rensiee
          Hello,
          I have been reading a few threads on here regarding Panasonic plasma tv's. I've found one thread which explains the same problem as mine, unfortunately the thread has not been completed.
          I got a free tv (TH-50PX8EA) from a friend which shows no screen. When plugged in only one red light shows up and when pushing the ON button, the red LED turns of and will only turn on again when pressing the ON button again.

          When plugging in the TV i hear two relays click fast and after a few seconds the third relay clicks.
          I have measured the voltage in the VSUS line, which...
          06-18-2024, 12:58 PM
        • tehmatix
          Pc monitor Philips 279M1 - red vertical stripe
          by tehmatix
          Hi,
          I got this monitor Philips 279M1 and the issue is : when is cold (turn off for few hours, not in standby) and turn it on it's coming whit a red vertical stripe. After 5 minutes or less (depend on the room temperature) the stripe disappearing
          A short video
          https://youtu.be/gj5vKF_xBMU...
          06-09-2023, 09:42 AM
        • Loading...
        • No more items.
        Working...