Asus VE247H power supply

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • paiol2
    New Member
    • Nov 2012
    • 6
    • Portugal
    #1

    Asus VE247H power supply

    Hi
    Does any of the colleagues have information on the board 4H.1AB02.A11, because he needed to know the value of the r613.
    Thank you all
    Tags: None
    • budm
      Badcaps Legend
      • Feb 2010
      • 40746
      • USA
      #2
      Re: Asus VE247H power supply

      Can we see good clear pictures of the board and the location where R613 is located?
      Never stop learning
      Basic LCD TV and Monitor troubleshooting guides.
      http://www.badcaps.net/forum/showthr...956#post305956

      Voltage Regulator (LDO) testing:
      http://www.badcaps.net/forum/showthr...999#post300999

      Inverter testing using old CFL:
      http://www.badcaps.net/forum/showthr...er+testing+cfl

      Tear down pictures : Hit the ">" Show Albums and stories" on the left side
      http://s807.photobucket.com/user/budm/library/

      TV Factory reset codes listing:
      http://www.badcaps.net/forum/showthread.php?t=24809

        Comment

        • paiol2
          New Member
          • Nov 2012
          • 6
          • Portugal
          #3
          Re: Asus VE247H power supply

          Hi,

          3 pictures of power supply.
          Attached Files

            Comment

            • R_J
              Badcaps Legend
              • Jun 2012
              • 9514
              • Canada
              #4
              Re: Asus VE247H power supply

              R613 marked 2003 should be 200kΩ, What is the number on the ic? I can't read it in the picture. It looks to be Power integrations ic. TOP267KG maybe ?
              Looks like it is between pin V and C and some datasheets list 191kΩ so 200kΩ should be right
              Last edited by R_J; 10-24-2020, 10:21 AM.

                Comment

                • paiol2
                  New Member
                  • Nov 2012
                  • 6
                  • Portugal
                  #5
                  Re: Asus VE247H power supply

                  Hi,
                  Thanks for the information.
                  Best regards

                    Comment

                    Previous template Next

                    Related Topics

                    Collapse
                    • Tynan Dill
                      Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
                      by Tynan Dill
                      I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

                      Upon bringing it home and plugging it up, it showed a standby light.

                      I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

                      The screen seems to blackout and stay black, but with a flashlight I can see the display.

                      With my Playstation 4 connected via HDMI, and running a game I can hear sound.

                      Assuming...
                      ORIGINAL POWER SUPPLY BOARD
                      7 Photos
                      11-22-2024, 01:46 PM
                    • sam_sam_sam
                      Desoldering gun station modified to use a 18 volt @ 20 amp switching power supply
                      by sam_sam_sam
                      I have wanting to do this project for quite sometime now and I finally found a switching power supply that will work on this desoldering gun station ZD-915 that the original switching power supply took a shit and just was not worth trying to fix it because this switching power is not quite big enough to handle the heater element and the vacuum pump

                      One note when I tested the switching power supply and the voltage control board I noticed that this desoldering gun heat up much faster than the original switching power supply which I was really surprised by to the point that I might buy...
                      03-31-2024, 02:12 PM
                    • GLISIT
                      Asus Probook P5440UF-XB74 power issue
                      by GLISIT
                      Hi all,

                      TL;DR - this laptop is driving me nuts with the oddball power-related behaviors. Appreciate any insight you can provide!


                      I'm experiencing a power issue on an Asus Probook P5440UF-XB74. Although I've worked with electronics and computers for decades, this is my first attempt at getting into motherboard-level component troubleshooting. Any help the community can provide is greatly appreciated!

                      A few weeks ago I was using the laptop (on battery power) for a Zoom meeting. The battery was running very low (long meeting) but I wasn't worried about...
                      01-16-2025, 02:29 PM
                    • sam_sam_sam
                      Modification to a ZD-987 desoldering/soldering station using a external switching power supply
                      by sam_sam_sam
                      I have been working on this concept for quite some time now with limited success but recently I found a switching power supply that is setup for the voltage that this soldering station needs to operate at however it also needs part of the secondary circuit from the original switching power because you need several voltage rails

                      I once tried to get a ZD-915 desoldering station to work on a 18 volt battery power supply but unfortunately things did not go well but I did find a work around but I might try this idea again but going at a little differently more about this another time...
                      07-01-2024, 06:34 AM
                    • JimBanville
                      Definitive technology SC 2000 subwoofer amp's power supply clicking and popping
                      by JimBanville
                      The sub developed a constant popping every couple seconds from woofer and power LED flickering with nothing but wall AC connected. Connecting an audio cable didn't change anything. It doesn't play but a second or two of audio in between the pops.
                      Opened it up and discovered the power supply is making a faint clicking or ticking sound.
                      I measured the amp's output to the woofer and it pulses up to 50mv DC to be driver. The pulses coincide with the power supply ticking/clicking.
                      I measured the power supply output going to the amp board and it too has this pulsing. Voltage cycles...
                      09-13-2023, 07:21 AM
                    • Loading...
                    • No more items.
                    Working...