samsung plasma ps51e550d1r no display
I have samsung plasma ps51e550d1r that powers on but doesn't display and the power light blinks 5 times, where to start looking ?
-
-
Re: samsung plasma ps51e550d1r no display
Photo's of the circuit boards and connections and also voltage readings giving the pin names and voltages on those pinsWilling to help but I'm no expert. -
Re: samsung plasma ps51e550d1r no display
so we were checking the boards for visible signs of damaged components and shorts and we found a few components in the y board and eventually got all the ones replaced we could see and detect as faulty after 2 or 3 attempts . now the situation is when power is connected the logic board led blinks 5 times in 5 second intervals for 30 seconds and stops and power led starts to do a double blink after 30 sec continuously . we get the 5v standby in the logic board. no vs and va in the y board. when we disconnect the bottom middle cable leading to the logic board the logic board led stays off and the power led 5 times again like original error. what can we check or try next?Attached FilesComment
-
-
Re: samsung plasma ps51e550d1r no display
The vs and va voltages will only show initially then will drop back to 0. Unhook the ysus and test vs and va right as you power on the tvComment
-
Re: samsung plasma ps51e550d1r no display
we disconnected the y board and tested the vs and va and we got the correct readings . next we check the components on the x buffer board and found three shorted components 2 transistors and a diode we replaced them and connected everything except the y buffer board and it lead to the three components on the x buffer board blowing again.
what could be the fault now?Comment
-
Re: samsung plasma ps51e550d1r no display
Always test the new parts before installing. There are so many fake transistors coming from China.Comment
-
Re: samsung plasma ps51e550d1r no display
we used compatible components from spare boards we have.
whats the symptoms of a faulty screen?Comment
-
Re: samsung plasma ps51e550d1r no display
Hairline cracks on the edge of the screen. Very hard to see.Comment
-
Re: samsung plasma ps51e550d1r no display
what else other then bad replacement components could cause the three components to blow again on the x buffer board?Comment
-
Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.
Upon bringing it home and plugging it up, it showed a standby light.
I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.
The screen seems to blackout and stay black, but with a flashlight I can see the display.
With my Playstation 4 connected via HDMI, and running a game I can hear sound.
Assuming... -
I hope this is the right forum to post in despite not technically being a repair, but still a question of swapping boards.
I thought I'd explore the possibility to upgrade an existing working Samsung ue55nu7096u with the logic board (and power board if needed) of a newer model (ue55ru7105k) of the same size and appearance (and resolution). The reason being I'd like the extra inputs of that board including component in, an extra HDMI port and bluetooth. Its panel is broken so I have no use for the board otherwise.
The models launched in 2018 and 2019 respectively.... -
Hi all!
This is my first post and also one of my first "deep dives" into electronic repair. I'm used to doing basic tasks with computers, like SSD/CPU replacement, thermal past re-application, etc. So here's the story...
I have a MacBook Air M1 that I bought to repair (I know, I'm weird; though I'm a CompSci major and want to learn more
, and it will not display anything on the internal display. I have verified that there's no backlight, as I booted the laptop and shined a flashlight on it and there's no display; it does completely boot up, and shows fine on an external...
11-04-2024, 06:36 PM -
Hi, this is my personal laptop, which the original board (lets call it Board A) blew up PU8700 (TPS51486), making a hole on the board, i had left the laptop at my desk one day with the battery fully charged and didn't touch it for a week, but when i tried to turn it on it didn't
Thought the battery was dead, so i plugged in the charger then tried to power on, the power LED blinked once, charged LED still orange, unplugged the charger, plugged in again and I noticed the "magic smoke" smell, so i unplugged the charger, removed the back cover and saw the blown IC (the "magic... -
This specification for the Samsung 9 NT900X5L Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the NT900X5L boardview and NT900X5L schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet, or download for Samsung 9...09-06-2024, 05:33 AM
Comment