Heard of the stacking method for LED repair. How about the side by side method.

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • neilc6
    Badcaps Legend
    • Nov 2015
    • 1550
    • Canada
    #1

    Heard of the stacking method for LED repair. How about the side by side method.

    Looks like they repaired this just enough so they could flip the TV. Owner bought it used. Would have been less work to replace the strips. Had to patch all the holes in the reflector sheet. LG 50LN5750. Saved a diffuser panel for this one but not the sheet.
    Attached Files
    Last edited by neilc6; 05-06-2020, 08:31 PM.
    Tags: None
    • dick_barton
      Badcaps Legend
      • Aug 2015
      • 6642
      • Wales
      #2
      Re: Heard of the stacking method for LED repair. How about the side by side method.

      That is such a shoddy repair I would never put my name to it.
      Willing to help but I'm no expert.

        Comment

        • notallbad
          Badcaps Legend
          • Oct 2012
          • 1190
          • UK
          #3
          Re: Heard of the stacking method for LED repair. How about the side by side method.

          That is bad, hope I don't ever come across anything like that.

            Comment

            • neilc6
              Badcaps Legend
              • Nov 2015
              • 1550
              • Canada
              #4
              Re: Heard of the stacking method for LED repair. How about the side by side method.

              I have also seen a 42LN strip installed in a 50LN. The narrower spacing caused the corner to be darker and I had to patch the reflector sheet which had new openings cut to fit the shorter strip.

                Comment

                • brucetv
                  Badcaps Veteran
                  • May 2015
                  • 281
                  • united states
                  #5
                  Re: Heard of the stacking method for LED repair. How about the side by side method.

                  What a mess. Must have been smoking some of that legal weed. Shameful

                    Comment

                    Previous template Next

                    Related Topics

                    Collapse
                    • flibidy
                      Magnum IA.100 Amplifier Switches on, No Output, Possible Input Side fault?
                      by flibidy
                      I have here a Magnum IA.100 which belongs to my parents.



                      The unit powers on & when the relay kicks in, you get a pop from the speakers (this might sound weird but is usual behavior for this amp). However, you get nothing coming through it from any of the inputs & no pops and crackls from any of the controls.


                      Because of the sound from the speaker when the amp turns on I have assumed that the output section probably works but I could be wrong & I'm not sure how to test that side of things further.


                      What Ive done........
                      Magnum IA.100 Front
                      8 Photos
                      01-01-2025, 01:26 PM
                    • bouny56
                      Lenovo E15 Nm-c421 usb-c work only in one side
                      by bouny56
                      ​Hello

                      Laptop E15 I5 10gen
                      Mb nm-c421

                      I have a problem with the usb-c power dc.
                      The motherboard start only in one side of the usb-c

                      Replace the usb-c port 2 times same problem

                      With the usb-c meter, one side 20v ok, other side the usb-c meter don't come on

                      Try to test the pin with the Mechanic Tail insertion tester and every pin are ok ?

                      Can the pd controler be the fault ? Or something else maybe ?

                      Thx

                      ...
                      02-11-2025, 03:15 AM
                    • howardc64
                      TCL 55S425 few horizontal lines, potential failure on both side of panel/buffer board
                      by howardc64
                      All left and right refers to looking from rear of TV (or looking from front with TV upside down)
                      • TV came with vertical bars and no image. Found faulty TVS on left buffer board. Also replaced T-Con (may have damaged the original while hot air removing components, board has slight warp) and have full image but few horizontal lines on the screen. Some of the lines appears to be 2 pixel tall while others are 1 pixel tall.
                      • Disconnecting left and right buffer board potentially reveals problems on both sides with different signals (unless this T-Con require jumper like Samsung FB_TRDY1&3) Fault
                      ...
                      07-24-2025, 05:17 PM
                    • Stephen
                      A2442 MacBook Pro 14" Two Left SIDE USB C ports charge but no data
                      by Stephen
                      Right SIDE usb.c port charges and transfers data without issue, two left side uSB c ports charge but do not receive or see data. Was liquid damaged, and repaired significantly and thought we were in the clear but appears this is the last issue that is rearing its head. I am trying to locate the RETIMER chip that communicates the DATA TX/RX but I cannot seem to find it on the schematic or maybe I am just so tired my eyes wore out lol. Any help would be great.
                      05-29-2025, 10:35 AM
                    • dicky96
                      Xilence XP600 600w ATX PSU - No PWM Controller on primary side - how does it work?
                      by dicky96
                      Hi guys
                      I have a faulty Xilence ATX PSU here

                      The fault basically is I have two short circuit power transistors on the primary side of the large SMPS transformer - they are 2SC3320.

                      There is another smaller transistor on the primary side C3866 which tests ok

                      The PSU has three transformers - it looks like the 2SC3320's drive the big one and the C3866 drives one of the small ones. There is a separate PFC PCB with it's own controller and MoSFETS

                      There is also a short on the 3.3V output and a near short on 5V - I suspect this probably blew...
                      05-11-2021, 07:55 AM
                    • Loading...
                    • No more items.
                    Working...