47LW6500 Debug Help - Power Board or Mainboard?

Collapse
X
Collapse
 
  • Page of 2
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • dannysporea
    Member
    • Apr 2020
    • 17
    • USA
    #21
    Re: 47LW6500 Debug Help - Power Board or Mainboard?

    Originally posted by budm
    The MICOM is not sending the control signal for this section of the circuit beside the DRV circuit.
    Thank you for confirming this. I was searching online for a replacement board, but was not able to find any... so I think my options are either baking it or trying a mail in board repair service. Has anyone used one of these services or know a trusted one?

      Comment

      • nomoresonys
        Badcaps Legend
        • Jan 2013
        • 12206
        • U.S.
        #22
        Re: 47LW6500 Debug Help - Power Board or Mainboard?

        One there, 72 bucks seems a little high to me? BUT they don't seem to be readily available so might be the best bet:https://www.tvpartstoday.com/EBT6139...bt61399411.htm
        Last edited by nomoresonys; 05-06-2020, 08:16 AM.
        Quit because THIS SITE LETS A ROGUE MEMBER TYPE ANY GARBAGE HE PLEASES AND THE POWERS THAT BE NEVER DO ANYTHING ABOUT IT SO HE NEVER QUITS. THEN YOU GET A PENALTY FOR RESPONDING TO HIS ATTACKS. BEEN GOING ON FOR WAY TOO LONG. DONE SUPPORTING A SITE THAT ALLOWS THIS BS.

          Comment

          • dannysporea
            Member
            • Apr 2020
            • 17
            • USA
            #23
            Re: 47LW6500 Debug Help - Power Board or Mainboard?

            Originally posted by nomoresonys
            One there, 72 bucks seems a little high to me? BUT they don't seem to be readily available so might be the best bet:https://www.tvpartstoday.com/EBT6139...bt61399411.htm
            Does not seem to be quite exact the one I have:

            EAX63969204(0) vs EAX63969205(0)
            EBR73358205 vs EBR74235304

              Comment

              • nomoresonys
                Badcaps Legend
                • Jan 2013
                • 12206
                • U.S.
                #24
                Re: 47LW6500 Debug Help - Power Board or Mainboard?

                Guess that's a good question, I matched it up by part number LG EBT61399411.
                Quit because THIS SITE LETS A ROGUE MEMBER TYPE ANY GARBAGE HE PLEASES AND THE POWERS THAT BE NEVER DO ANYTHING ABOUT IT SO HE NEVER QUITS. THEN YOU GET A PENALTY FOR RESPONDING TO HIS ATTACKS. BEEN GOING ON FOR WAY TOO LONG. DONE SUPPORTING A SITE THAT ALLOWS THIS BS.

                  Comment

                  • nomoresonys
                    Badcaps Legend
                    • Jan 2013
                    • 12206
                    • U.S.
                    #25
                    Re: 47LW6500 Debug Help - Power Board or Mainboard?

                    What is your full panel number? it's on the metal chassis someplace.
                    Quit because THIS SITE LETS A ROGUE MEMBER TYPE ANY GARBAGE HE PLEASES AND THE POWERS THAT BE NEVER DO ANYTHING ABOUT IT SO HE NEVER QUITS. THEN YOU GET A PENALTY FOR RESPONDING TO HIS ATTACKS. BEEN GOING ON FOR WAY TOO LONG. DONE SUPPORTING A SITE THAT ALLOWS THIS BS.

                      Comment

                      • dannysporea
                        Member
                        • Apr 2020
                        • 17
                        • USA
                        #26
                        Re: 47LW6500 Debug Help - Power Board or Mainboard?

                        Originally posted by nomoresonys
                        What is your full panel number? it's on the metal chassis someplace.
                        Not sure which one is the correct number... but here is everything:

                        LC470EUF
                        (SD)(F3)
                        470AAP6K0013Y K31B
                        LIGHT GUIDE: >PMMA<

                        6091L-1851A 110928 PNL J7519UHHWNLP2AAZ1851A1GB0

                          Comment

                          • nomoresonys
                            Badcaps Legend
                            • Jan 2013
                            • 12206
                            • U.S.
                            #27
                            Re: 47LW6500 Debug Help - Power Board or Mainboard?

                            Yes it was a match, looks like it's gone tho.
                            Quit because THIS SITE LETS A ROGUE MEMBER TYPE ANY GARBAGE HE PLEASES AND THE POWERS THAT BE NEVER DO ANYTHING ABOUT IT SO HE NEVER QUITS. THEN YOU GET A PENALTY FOR RESPONDING TO HIS ATTACKS. BEEN GOING ON FOR WAY TOO LONG. DONE SUPPORTING A SITE THAT ALLOWS THIS BS.

                              Comment

                              • dannysporea
                                Member
                                • Apr 2020
                                • 17
                                • USA
                                #28
                                Re: 47LW6500 Debug Help - Power Board or Mainboard?

                                Originally posted by nomoresonys
                                Yes it was a match, looks like it's gone tho.
                                How did you figure out if it was a match or not? Just in case others show up I'll know how to check if they can be compatible even if having different numbers...

                                  Comment

                                  • nomoresonys
                                    Badcaps Legend
                                    • Jan 2013
                                    • 12206
                                    • U.S.
                                    #29
                                    Re: 47LW6500 Debug Help - Power Board or Mainboard?

                                    Key is to match your service code on the back cover of the tv, it is 47LW6500-UA.AUSYLUR correct?
                                    Quit because THIS SITE LETS A ROGUE MEMBER TYPE ANY GARBAGE HE PLEASES AND THE POWERS THAT BE NEVER DO ANYTHING ABOUT IT SO HE NEVER QUITS. THEN YOU GET A PENALTY FOR RESPONDING TO HIS ATTACKS. BEEN GOING ON FOR WAY TOO LONG. DONE SUPPORTING A SITE THAT ALLOWS THIS BS.

                                      Comment

                                      • dannysporea
                                        Member
                                        • Apr 2020
                                        • 17
                                        • USA
                                        #30
                                        Re: 47LW6500 Debug Help - Power Board or Mainboard?

                                        Originally posted by nomoresonys
                                        Key is to match your service code on the back cover of the tv, it is 47LW6500-UA.AUSYLUR correct?
                                        Yes, the service code on the back cover is 47LW6500-UA.AUSYLUR as well as on a sticker on the main board that includes the different number EBR74235304.

                                          Comment

                                          • nomoresonys
                                            Badcaps Legend
                                            • Jan 2013
                                            • 12206
                                            • U.S.
                                            #31
                                            Re: 47LW6500 Debug Help - Power Board or Mainboard?

                                            Yes, certain numbers can be different, usually your good to go when you match the service code.
                                            Quit because THIS SITE LETS A ROGUE MEMBER TYPE ANY GARBAGE HE PLEASES AND THE POWERS THAT BE NEVER DO ANYTHING ABOUT IT SO HE NEVER QUITS. THEN YOU GET A PENALTY FOR RESPONDING TO HIS ATTACKS. BEEN GOING ON FOR WAY TOO LONG. DONE SUPPORTING A SITE THAT ALLOWS THIS BS.

                                              Comment

                                              • nomoresonys
                                                Badcaps Legend
                                                • Jan 2013
                                                • 12206
                                                • U.S.
                                                #32
                                                Re: 47LW6500 Debug Help - Power Board or Mainboard?

                                                Now it says one in stock again.
                                                Quit because THIS SITE LETS A ROGUE MEMBER TYPE ANY GARBAGE HE PLEASES AND THE POWERS THAT BE NEVER DO ANYTHING ABOUT IT SO HE NEVER QUITS. THEN YOU GET A PENALTY FOR RESPONDING TO HIS ATTACKS. BEEN GOING ON FOR WAY TOO LONG. DONE SUPPORTING A SITE THAT ALLOWS THIS BS.

                                                  Comment

                                                  • dannysporea
                                                    Member
                                                    • Apr 2020
                                                    • 17
                                                    • USA
                                                    #33
                                                    Re: 47LW6500 Debug Help - Power Board or Mainboard?

                                                    Thank you all! Ordered it, hopefully it will work. Will keep you posted.

                                                      Comment

                                                      Previous 1 2 template Next

                                                      Related Topics

                                                      Collapse
                                                      • DynaxSC
                                                        MSI PRO Z690-A DDR4 (MS-7D25) - stuck during boot every second time - debug code 16 & A1
                                                        by DynaxSC
                                                        Hi Folks

                                                        I have an MSI PRO Z690-A DDR4 (MS-7525) which underwent LGA1700 replacement and had a missing resistor in the VRM section. The missing resistor RV170 (49,9Ω) has been resoldered, and I have also replaced a demaged LGA1700 socket.

                                                        Generally the board does boot to Windows, but not always in the first attempt, but after the second attemp to boot the board with Power Button. Also restarting the board from Windows ends up with stuck boot process, but restarting the board again (long push Power Button or switching off and on PSU). Under Windows etherything works                                                        ...
                                                        09-29-2024, 04:27 PM
                                                      • Alain Renteria
                                                        LG OLED77G2PUA Not Powering On After Storm
                                                        by Alain Renteria
                                                        Got it for free on marketplace because it stopped working after a storm.

                                                        When I began troubleshooting the power supply, I fried 2 fuses and a mosfet by shorting 2 pins on accident, but I've replaced those components.

                                                        The tv had a soundbar connected, which was also killed by the storm. On the tv side I found a transistor shorted on the hdmi 2 (arc) and a lot of capacitors shorted on the main board.

                                                        Disconnecting and reconnecting the psu to main board cable, while still being connected to 120 V AC, would wake things up, such as a red light from the optical...
                                                        11-25-2024, 11:11 PM
                                                      • D3D_Tray
                                                        Lenovo L14 Gen 5 Intel debug BIOS
                                                        by D3D_Tray
                                                        Hey Guys,

                                                        are there any known keyboard combination to enable the (advanced) debug bios for the Lenovo L14 Gen 5 (Intel Core Ultra 5 125U) yet?

                                                        So far I got into the Lenovo Ideapad Gaming 3 - 15IHU6 with the combo FN (hold), R then N into the debug BIOS and
                                                        for Lenovo Thinkbooks via FN (hold) and then F1, 1, Q, A, Y, F2, 2, ... up to F6, 6, Y, H, N pattern
                                                        but those didn't work

                                                        I scavenged some EFI files that do (more or less) allow me to see the full BIOS settings but I can't write since something in the ACPI settings also want to get written...
                                                        Today, 03:00 AM
                                                      • SS454
                                                        vizio e650i-a2 backlight flashes then turns off
                                                        by SS454
                                                        vizio e650i-a2 (LWJAOZBP Serial) led backlight flashes then turns off, has video (via flashlight) and audio.

                                                        panel: au optronics T650HVN05.4
                                                        72 led total on 12 strips, 6 led per strip wired in three groups of 24 (led driver board has three anode and three cathode pins)
                                                        link to datasheet: https://datasheetspdf.com/pdf-file/8.../T650HVN05.4/1

                                                        Vizio 56.04219.641G (liteon PA-3231-01WN-LF) Power Supply Unit
                                                        https://www.shopjimmy.com/vizio-56-0...-power-supply/

                                                        Vizio 55.75J01.001G (91.75J10.004G) Main Board...
                                                        08-20-2020, 03:57 PM
                                                      • DominanceINC
                                                        MSI Pro Z790-P Wifi 1missing CPU pins
                                                        by DominanceINC
                                                        Hello,

                                                        I am a new forum member. I found a broken MSI motherboard with lot of problems. The other problems need schematic. Because, the missing parts what were breaking down with screwdriver and pliers at a standoff.
                                                        So, its actual problem is a missing Vcore and Gnd pins in the CPU socket. My question is that, can it be used safely without these two pins? Only for testing at first, while the other problems will be solved. I would wish repair them later.

                                                        The other spots are thermal phaste, because, the under educated installer of the CPU did wipe the contacts of the...
                                                        2 Photos
                                                        07-21-2025, 05:38 AM
                                                      • Loading...
                                                      • No more items.
                                                      Working...